The wiki gains right-to-left notes for Last Response, the phone's Compose
editor and the rendered Markdown view, plus a Troubleshooting entry for the
#715 report: the terminal is xterm.js, which has no right-to-left support
(xtermjs/xterm.js#701). src/web/CLAUDE.md and the invariants now state the dir
pins, the logical-property rule and that the direction pass runs last.
The changeset claimed every file path stays left to right. It now says only
what holds: the paths the viewer links on its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The New folder rule in the same paragraph does cover that picker, so "none of
the host rules" said too much.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The picker is now reached from every Add Case Browse button, so three lines
in the manual and the opening of the CLAUDE.md and architecture-invariants
paragraphs read wrong. A Browse fills its form field, only the Path key types
into a prompt, and Docker's Container Workdir picker lists the inside of the
container through POST /api/docker-cases/browse: it always shows dot entries
and the host allowlist does not apply to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the folder field empty, Create New's Browse opens in the cases folder, and New
folder there answered "Use Add Case > New Case". There is no tab of that name (the
label is Create New), and a Create New user is already on it. The refusal now reads
right from Link Existing and from Create New's custom folder. Its test pin, the code
comment, the manual, api-reference, CLAUDE.md and architecture-invariants move with it.
The block() helper in the New folder picker test returned an empty string for a name
that is not in session-ui.js, so .not.toContain passed and a renamed picker dropped out
of the check. It now asserts the name was found.
The manual's path picker list said two places and left out Create New, which the New
folder paragraph names. It now lists every Browse that opens the picker, and that
paragraph is rewrapped to the page's width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A tcsh login shell worked on 1.48.0 only because the local sh rewrote
${SHELL:-/bin/sh} to this host's shell. With the launch verbatim, tcsh gets -i -l,
refuses it and every stock launch leaves a dead pane. The changeset and
docs/remote-sessions.md described that as a standing limitation; they now name it
as a change in this release, with what the override workaround costs.
Also: extraSshOptions joins the list of values now literal at launch, the stock pane
command is shown as /bin/sh -c in the docs and the builder's JSDoc, the invariants
state how the launch must reach the far end, the manual pages cover $ in an override,
and the invariants no longer say extraSshOptions refuses a bare $ (it never did).
Reworded the em-dashes on the invariants line this rewrites.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Records the limit on a session with its own CLAUDE_CONFIG_DIR, which does not
carry its conversation across an endpoint because the isolated projects link
goes to the server's tree. Also records that an own home set before a restart
with no selection is lost on clear, that only an absolute path is persisted,
and tells the user manual what a clear gives back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The gate comment in terminal-ui.js said a stale-false flag falls through
to the PageUp/PageDown fallback, which is false for pi since the second
commit of this PR removed that fallback. The FOOTGUN comment above it made
the same claim. Say what happens instead.
"Every pi below 1.0.0 emits no mouse enables" was too absolute: regular
was the default there, but fullscreen exists from 0.84.0. Measured with
--tui-mode fullscreen under tmux on 0.84.1, 0.85.0, 0.86.0 and 0.99.2:
alternate_on=1, mouse_any_flag=1, mouse_sgr_flag=1. Default settings on
0.99.2 report all 0.
Document that Wheel Scrolls Local History leaves the wheel dead in
fullscreen pi (wiki, integration guide, changeset), add a pi block to
Troubleshooting, cross-reference the accepted exception from the dead
gesture rule in architecture-invariants, and mark the pi-integration-plan
passages this PR reversed as superseded.
Comments and docs only, no runtime change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The API reference still said a registry failure on create and clone is
500 and did not list the rename's new 409s. CLAUDE.md said both files
are restored after a failed registry write, and left out the
config-backup restore exception.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The security wording claimed a folder strictly below workingDir was the whole
argument, which the symlink fix showed was only the lookup's half. The rest is
docs that were missing: liveWorktree, root=live and worktree in the API
reference, the mechanism section the CLAUDE.md paragraph had no pointer to, what
a root=live query matches against, and the limits a reader meets in the wiki
(the Git panel stays on the session's folder, a session started below the
repository's top is not followed, a page under .claude/worktrees opens as
source).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
transcriptPageKeys applied to every pi, and a pi in `tuiMode: regular` binds
PageUp/PageDown to its editor. It emits no mouse enable, so the flag stays
false, and on a fresh pane the buffer is hollow: the wheel sent PageUp, the
caret of a multi-line draft moved, and the next keystroke landed on the wrong
line. Measured on real pi 1.1.0, 1.4.0 and 1.5.0. Regular mode is not exotic,
it only takes one line in pi's settings. Telling the two modes apart would
need a new capability, since the paging gate takes no id, so pi has no
fallback: a fullscreen pi with "Wheel scrolls local history" on stays where
master left it.
altScreen, the half of the fix that does the work, was pinned by nothing:
reverting it left 1328 tests green. The strip decision table reads its
expected value from the same registry entry. pi now has its own block using
the bytes it really emits, which also pins that focus reporting survives.
The fullscreen default dates from pi 1.0.0, not 1.4.0, so the comments say
that, and the sites still calling pi narrow-strip or main-screen by default
are corrected. Where a comment listed CLIs it now names the capability.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Handing the launch to bash verbatim exposed `"${SHELL:-/bin/sh}"` to the far
end for the first time. tmux runs a one-argument command through the remote
default-shell, not /bin/sh as the comments said, and fish refuses `${...}`:
on a fish host, or a bash login with `set -g default-shell fish`, every new
pane died with status 127. master only survived because the local sh had
already rewritten that token to this host's shell path.
Codeman's own text now goes to `/bin/sh -c` as separate tmux arguments, which
tmux execs without a shell. A commands.* override stays one argument and keeps
the default-shell it was written for: under `/bin/sh` a `source` or `[[` in an
override dies with 127 on bash and zsh hosts.
The tests read the argv tmux would receive through a real sh, so they need no
fish: every stock launch must reach /bin/sh and an override must not. The
docker half of bashCArg was pinned by nothing, so it gets its own test.
Comments that described the removed double-quote layer are corrected, and
remote-hosts.ts no longer claims overrides are seeded from the default text
or that they rescue nushell and elvish.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude Code's EnterWorktree moves the running process into
<repo>/.claude/worktrees/<name>, while Session.workingDir stays on the main
checkout. The Files panel kept walking workingDir, so it listed a tree the
agent had left.
paneCwd already follows the move, measured on Claude Code 2.1.318 in both
directions, so nothing new has to track the agent. It also follows every cd
in a shell, so a new SessionState.liveWorktree narrows it to a linked
worktree, read from the .git file without starting git.
Only a folder strictly below workingDir is ever an answer, and the listing
only starts there: returned paths stay relative to workingDir, so the
preview, raw and edit routes are unchanged and confinement does not widen.
A worktree outside the session folder stays unfollowed.
The panel asks with root=live, shows a strip naming the worktree with a
switch to the session folder, and follows the agent in and out while open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
pi 1.4.0 is an alt-screen TUI that enables mouse tracking once at start.
Codeman's replay (tab switch, reload) drops that mode in xterm
(mouseTrackingMode none, baseY 0), so the wheel hit an empty local buffer
and stayed dead until a resize made pi redraw.
Same shape as copilot: altScreen strip-mux-and-mouse (the server records
the stripped DECSETs as cliMouseTracking, which survives the replay),
wheelForward always, transcriptPageKeys (PageUp/PageDown fallback for a
stale flag, measured on pi 1.4.0). _shouldForwardWheelToApp treats pi like
copilot. Registry pins and docs updated.
Tests: 2 new in terminal-scroll-routing (red before). Full run: 12989
passed, 5 red from the de_DE locale / XDG env (custom-model-run-menu-ui,
git-worktrees, edit-history-sync), all green under LANG=C.UTF-8.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
(cherry picked from commit 53e4136d9f4401e9250ac6a122599ffcb2a57e8a)
Applying a custom model writes the endpoint's values over the keys it
injects, and clearing the model unset those keys. A session that had set
one of them itself lost that value: its own DSH_HOME, CODEX_HOME,
GROK_HOME or GEMINI_API_KEY was gone once the model was cleared, and so
was CLAUDE_CONFIG_DIR, which silently moved a Claude session onto the
default account. Switching endpoints did the same.
setCustomModel() now records what the session held under each injected
key and restores it on clear and on switch. Quick-start passes the
caller's values to the Session constructor so they are seen before the
selection lands.
The selection overwrites the only other copy, tmux's setenv, so the
session's own home directory has to survive a Codeman restart on its
own. __customModel therefore stores that one path, the single exception
to persisting keys only, and recovery runs it through
clampEnvOverridesForOwner() so a revoked grant cannot bring it back. Any
other own value, a credential included, stays in memory only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Five routes changed the linked-cases registry: link, unlink, rename, and a
create or clone into a custom folder. Each read the file, checked it and wrote
it back on its own, so two requests that both read before either wrote lost
an entry. Two clones that claimed one name and finished together both passed
the name check, both answered success, and the later write replaced the
earlier entry. The same race made "a name linked while the clone ran is a
409" in test/routes/case-clone-custom-folder.test.ts fail about half the time.
- New src/web/linked-cases-writer.ts, mutateLinkedCases(), shaped like
mutateSettingsFile(): mutations run one at a time, each write is a temp
file renamed over the registry (through a symlink, keeping its mode), and
a file that is not a JSON object is refused (409 CONFLICT) instead of being
read as {} and overwritten.
- All five writers go through it, with their name checks inside the
callback, so exactly one of two requests for one name wins. Rename also
re-checks that the old name still points at the old folder, and drops its
manual registry undo, since a failed write no longer changes the file.
- Tests: test/linked-cases-writer.test.ts (writer behaviour, and concurrent
link/unlink through the routes with slowed writes, which fail on the old
code). Tests that forced a failed registry write with chmod 444 or a
directory now inject the failure at the rename, or expect the refusal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The release note and the security doc read as if no file view could return it. The
attachment, folder and download routes refuse it; file-raw serves a session's own
workspace without the blocklist, so a session rooted at the home directory can
still read it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Consolidates the four contributor changesets, and rewords the em-dashes this release
added in comments and docs. The five in test/settings-save-failure-ui.test.ts stay:
they assert existing toast text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The startup hint is no longer typed, a Discord reply is one of the input paths that
set fromUser, edit-history is a state file, POST /api/filesystem/mkdir is in the API
reference, and the store's header says which routes really refuse it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Discord bot token was readable through the attachment routes, because
discord.json was not on the sensitive list, and so were webhook.json,
custom-model-hosts.json and the generated custom-model configs. Config backups
were the wider gap: a dated copy of users.json or settings.json matched none of
the name-anchored patterns. All are blocked now.
`codeman notify --file` relied on folder confinement alone, which holds nothing
back when a tab's folder is the home directory, and it would also post a
workspace .env. It now applies the attachment blocklist to the real path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Owner decision. Typing the note into a brand-new non-Claude tab spent a model
turn per tab and, for a spawned worker or a scheduled run, landed with the first
real prompt. Claude keeps its hint through the system prompt, and every other CLI
is told nothing. The setting goes with the path it gated: sessionIdle, the fresh
set, isHintableSession and the session:idle wiring. sendInput loses `fromUser`,
which was only ever false for the hint, and the deps test pins that a reply is a
person's own input.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`cwd` beside the fixed `workingDir` reads ambiguously on a public API surface, and
`paneCwd` says where the value comes from, like `paneExit`. Also pin the field on
the payload the browser really receives (getSessionStateWithRespawn), and give the
pane-directory text its own architecture-invariants paragraph.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Bash( row holds a command, so its parentheses do not bound one spaced path:
`Bash(/tmp/a.out input.txt)` became a single link to a file that cannot exist and
lost master's `input.txt` link. The path tools keep linking a spaced name whole,
and a hard-wrapped Bash( row gets no spaced lookup either. Test rows from #734.
Co-Authored-By: DDT <141296842+Hugo-DDT@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Say that settings.yaml is shared only until the session's first settings write
(dsh saves by rename, which replaces the link), warn when a session's own DSH_HOME
does not answer and the server's home is linked instead, test
guardSessionConfigDirHome, and document the linkFromRealHome exception and what a
custom-model dsh session does not carry over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The launch-id check is pure, so it now runs before the context warning and the
swap confirmation: nobody agrees to evict a model only to get the 400. Also the
search-box and in-use comments, the model-plain-colon wording, and the wiki's
order of the picker's marks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new install has no seen list, so every new OpenCode user was still warned about
an October incident that is long over. The mechanism stays for the next notice;
an empty list is now a valid file, and the validators keep running over whatever
it holds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Classify OpenSSL and LibreSSL's SSL_connect errors as unreachable again (`_` is a
word character, so \bssl\b missed them and the user read the temp directory as the
reason), point a cases-folder refusal at Clone Repo instead of Create New, and move
the mechanism and history out of CLAUDE.md into architecture-invariants.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It sat between the "two places" list and the paragraph starting "It browses",
so that "It" read as New folder, and it said the button is not offered inside
the cases folder when the button shows and the route refuses.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
selectSession() toggles .active at once while _syncTabStripCorner() only runs in
the debounced render, so a cap set after measuring left a newly selected first
tab wider than the room and dropped the first row below the toolbar until then.
max-width changes nothing on a narrower tab, so the cap is simply always on, and
the clear-before-measure and finish-the-animation loops go. The no-usable-room
test uses 8 tabs: at 40 the scroll fallback fires first and it passed at any
threshold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Follow-up from an own review pass of de436576:
- PATH_TOKEN_RE branch 1 stops at the next `file://` instead of at `:`,
so `file:///tmp/plot-12:30.png` is found again; still linear.
- Forward reads yield between files like "Load older"; a store removed
meanwhile ends the read and its printed paths are never probed.
- POST /edits/older and GET /edits/:entryId no longer load a store for
remote, Docker or non-claude sessions (shared unsupportedList()).
- Time budgets widened (1 s per line, 3 s per chunk; ~3 s / 6.6 s before
the fix) so the throttled suite does not flake.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- probeLocalPaths: every agent-printed candidate goes through
probePathKind() first (no pastCap, bulk scan), sequentially; only a path
that answered 'file' gets realpath + stat. A path on a mount that stopped
answering no longer hangs the sync, a queued sync or remove().
- PATH_TOKEN_RE: branch 4 starts only at a token boundary (`:` excluded so
URLs stay ignored), branch 1 stops at `:`. Linear in the line length
(30,000 `#` took ~3 s before).
- Load older yields to the event loop between the files it parses.
- GET /edits answers unsupported without loading a store.
- CLAUDE.md paragraph trimmed to the rules; probe and regex rules added to
architecture-invariants#edit-history-panel.
Tests: stall test through the real sync and probe with a stat that never
settles; time-budget tests with 30,000-character inputs and a 139-result
base64 chunk; route test asserts no store load for unsupported sessions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review round on PR #757. The route turns EVERY upstream failure into
isLlamaSwap: false, so the old line silently promised an unreachable
endpoint was merely mute, and the live-session check missed a null pid
(the PTY exited, the same test keep-warm applies).
- Require pid !== null in _getCustomModelInUseBySession, pinned by a
'process exited' case in the marks-nothing table
- Reword #customModelPickUnknown to claim only that nothing was
reported, true for a down endpoint too; drop the 'stays quiet for a
failed probe' promise from changeset, docs and comments
- architecture-invariants: add the In-use tier, both pin fences
(customModel not displayModel; stopped/null-pid/paneExit never
count) and the unknown-line rule
- Mirror the wording through i18n (key + zh-CN), index.html fixture,
styles.css comment, and the run-menu tests
Only llama-swap answers what is loaded, so behind a gateway such as Bifrost
nothing was marked and the picker fell back to discovery order apart from the
one CLI that had launched there before. A live session whose own injected
endpoint is that host now promotes its model as "In use by a session", under
its own tag and below llama-swap's "Currently loaded" answer, reading only
what Codeman injected rather than terminal text, and never a stopped session.
When genuinely nothing is known the picker says so instead of leaving an
unmarked wall, and stays quiet for an endpoint that merely failed to answer.
Round-four review smaller items: api-reference now states the opposite-of-apiKey behaviour for an omitted defaultContextLength, and the wiki sentence follows the code, modelContextLengths[id] ?? defaultContextLength: any stored figure beats the default.
Codeman maintainer