The launch-id check is pure, so it now runs before the context warning and the
swap confirmation: nobody agrees to evict a model only to get the 400. Also the
search-box and in-use comments, the model-plain-colon wording, and the wiki's
order of the picker's marks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new install has no seen list, so every new OpenCode user was still warned about
an October incident that is long over. The mechanism stays for the next notice;
an empty list is now a valid file, and the validators keep running over whatever
it holds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Classify OpenSSL and LibreSSL's SSL_connect errors as unreachable again (`_` is a
word character, so \bssl\b missed them and the user read the temp directory as the
reason), point a cases-folder refusal at Clone Repo instead of Create New, and move
the mechanism and history out of CLAUDE.md into architecture-invariants.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It sat between the "two places" list and the paragraph starting "It browses",
so that "It" read as New folder, and it said the button is not offered inside
the cases folder when the button shows and the route refuses.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
selectSession() toggles .active at once while _syncTabStripCorner() only runs in
the debounced render, so a cap set after measuring left a newly selected first
tab wider than the room and dropped the first row below the toolbar until then.
max-width changes nothing on a narrower tab, so the cap is simply always on, and
the clear-before-measure and finish-the-animation loops go. The no-usable-room
test uses 8 tabs: at 40 the scroll fallback fires first and it passed at any
threshold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review round on PR #757. The route turns EVERY upstream failure into
isLlamaSwap: false, so the old line silently promised an unreachable
endpoint was merely mute, and the live-session check missed a null pid
(the PTY exited, the same test keep-warm applies).
- Require pid !== null in _getCustomModelInUseBySession, pinned by a
'process exited' case in the marks-nothing table
- Reword #customModelPickUnknown to claim only that nothing was
reported, true for a down endpoint too; drop the 'stays quiet for a
failed probe' promise from changeset, docs and comments
- architecture-invariants: add the In-use tier, both pin fences
(customModel not displayModel; stopped/null-pid/paneExit never
count) and the unknown-line rule
- Mirror the wording through i18n (key + zh-CN), index.html fixture,
styles.css comment, and the run-menu tests
Only llama-swap answers what is loaded, so behind a gateway such as Bifrost
nothing was marked and the picker fell back to discovery order apart from the
one CLI that had launched there before. A live session whose own injected
endpoint is that host now promotes its model as "In use by a session", under
its own tag and below llama-swap's "Currently loaded" answer, reading only
what Codeman injected rather than terminal text, and never a stopped session.
When genuinely nothing is known the picker says so instead of leaving an
unmarked wall, and stays quiet for an endpoint that merely failed to answer.
Round-four review smaller items: api-reference now states the opposite-of-apiKey behaviour for an omitted defaultContextLength, and the wiki sentence follows the code, modelContextLengths[id] ?? defaultContextLength: any stored figure beats the default.
- share one context-length resolution (discovered figure, endpoint default fallback) across the routes and boot recovery, with a recovery test
- record listed per-slot context figures with a slot count of 1 and force the slot-count fallback once per rediscovery
- open up the codex model launch token for qwen3-style ids (model-plain-colon), pinned by a spawn-golden case
- pass the full discovered window to opencode as limit.context
- translate the picker search strings and document the discovery precedence
The wrapped header strip fell back to the plain wrap whenever its first
tab was wider than the room beside the toolbar. A selected tab is wider
(its gear and close show), so selecting the first tab flipped the whole
strip back: the toolbar took its own column again and, with long names,
every tab took a line of its own. Selecting any other tab brought the
full-width rows back.
The first tab is now trimmed to the room instead (tab-corner-fit, a
max-width from --tab-corner-first-max, its name ellipsized). Only a
toolbar that leaves less than TAB_CORNER_MIN_FIRST_TAB (120px) beside
it keeps the plain wrap, which does not depend on the selection.
Two measuring details make the trim hold:
- the room comes from the rounded-up float width, less the tab's 2px
margin and a pixel for subpixel layout (a tab at the exact width still
wrapped under the float);
- the first tab is measured with its trim cleared and its gear/close
width transitions finished, or a grown room reads the last trim as the
width and a selection change is judged by the width the tab is leaving.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A folder made in a cases directory is already a case (no scaffold), which Link
Existing then refuses by name and which deleting would take the linked folder
with. The route refuses a cases directory as the parent (the shared one and the
caller's own), a leading tilde in the name, and maps a vanished parent to 404.
Docs now say every name it accepts is one Link Existing accepts, and the wiki
describes the button.
The name rule now matches safePathSchema (letters, digits, space and _ - . ~,
no .., no leading dot, at most 255 bytes) so every folder it makes can be
linked. A file as the parent is a 400, errno text is no longer returned,
showHidden is forwarded like browse, and Create is disabled while the request
runs. Adds multi-user scoping tests.
A direct clone whose git-slot wait timed out came back with no spawnError, so
the cleanup emptied a folder git never touched. GitRun now says whether git
started and the cleanup requires it. Cloning into a folder at or inside a
Docker case workspace is refused, as git status, fetch and worktrees do, since
git would run the new repository's hooks and filters on the host.
The picker could only choose an existing folder. POST /api/filesystem/mkdir
creates one folder inside a folder the picker may browse (same roots,
ownership and blocked-tree rules as browse), and PathPicker gains an opt-in
allowNewFolder that adds a New folder button and selects the result.
A direct clone into an empty folder emptied the folder after any failure, which
deleted a concurrent attempt's finished clone when git had written nothing.
Clones into one folder are now mutually exclusive in-process, the cleanup is
skipped when git refused the folder, never ran, or the mount is unresponsive,
and a name linked while the clone ran is a 409 that keeps the folder.
Documents path for POST /api/cases/clone.
The custom folder was treated as a parent, so the repository landed in <folder>/<case name>. The chosen folder is now the clone destination: an empty existing folder is cloned into directly (CloneOptions.intoEmptyDir, no temporary sibling, never removed on failure), a new folder is created, and a folder with files is refused.
Clone Repo could only clone under ~/codeman-cases. POST /api/cases/clone now takes an optional path (parent folder plus case name) and the Clone tab gets a Clone into a custom folder option with a Browse button, mirroring Create in a custom folder. The path is judged by prepareNewCasePath, the clone is registered as a linked case, the option is admin-only in multi-user mode, and an existing target folder is refused.
#722 stopped handing a remote session's workingDir to the Ralph tracker,
which also left isFileAuthoritative false for remote sessions only. That
flag is what keeps the output-based completion guessers off, and it is
true for every local session with a working directory, so a remote loop
could end, and mark every todo done, on a prose line such as "All tasks
completed" while a local one cannot.
setRemoteWorkingDir() records the path without reading or watching the
local disk, so the fix plan stays authoritative as for a local session;
the file still reaches the tracker only through fix-plan/read, over ssh.
The test pins both, and fails on the previous head.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add the L-shaped strip to the Tab layouts section of
docs/architecture-invariants.md, the mechanism file src/web/CLAUDE.md
links to.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Export isPathWithinRoot from file-routes.ts and use it for the remote
@fix_plan.md confinement, so the two checks cannot drift; rewrap the
readRemoteFixPlan JSDoc and say NOT_FOUND; list fix-plan/read and the two
write refusals in docs/remote-sessions.md and architecture-invariants.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
toggleSessionImageWatcher checks the response, so any refusal puts the
switch back and toasts an error instead of a success; architecture-
invariants says the image watcher never watches a remote workingDir.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Note in docs/remote-sessions.md that the @fix_plan.md auto-load does not
run for remote sessions, and rewrap the test's header comment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hand the bracketed frame to the target terminal with input() so onData
scrolls to the bottom, clears the selection, and delivers the bytes.
The paste trap no longer writes the frame itself.
Fixes#716
Co-authored-by: DDT <1786035110@qq.com>
KeyCode 229 recovery forwarded a composed character that xterm had
already delivered, so a desktop dead-key backtick arrived twice.
create() now attaches only when the primary pointer is coarse.
Ctrl+V text paste went through terminal.paste(), which drops the
CSI 200~/201~ markers after a replay clears xterm's DECSET 2004
mirror. Plain text is now a hand-built bracketed frame on the
session input path.
Fixes#716
Co-authored-by: DDT <1786035110@qq.com>
CODEMAN_ALLOW_UNAUTHENTICATED_NETWORK and the new
CODEMAN_ALLOW_UNAUTHENTICATED_TUNNEL (#718), with their CLI flags, join
the documented environment variables the versioning policy covers, from
1.46.0, the release that gave each its own meaning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The merged PRs (mostly #714's git fetch) added about 120 em-dashes in
comments, docs, test names and three settings strings. Each one is now a
comma, colon, semicolon or parentheses. The English settings strings in
index.html and their i18n.js keys change together, and the zh-CN value
for the fetch interval uses full-width parentheses instead of a double
dash. The one left is the regex in constants.js that matches a dash
typed as a word, which is behaviour, not punctuation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
terminalLinkLine() cut the URL's first row at its cell to stitch the URL, so a
path in a later column of that row was never scanned. The cut-off columns now
follow the stitched rows as a segment of their own, mapped back to their cells.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The self-gate now says the skill reads saved Codex conversations offline outside a session; the staging
reference says only tagged input gets 409 during a guarded submit (the rest is held), and the API
reference notes a managed write past a full hold queue falls back to a direct write. Also: missing
reference rows, agent --help naming inspect/stage/submit, the tunnel opt-in in Remote Access, MCP wording.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
readDockerCases() reads an unreadable or half-written docker-cases.json as [], so a fetch (which runs
repository hooks, and runs unattended on the interval) could run inside a Docker workspace. The fetch
paths now read it through a strict reader: the Fetch button answers a failed run (state 'error') and the
scheduler skips the tick, undoes its picks and logs once. The status and diff routes are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts resolved by keeping both sides:
- CLAUDE.md (Agent CLI): #694's opening (an HTTP client, the experimental
agent-session-routes behind agentCoordinationEnabled) with #708's clause
on the directory spawn and its two refusals.
- docs/api-reference.md (codeman agent): #708's spawn paragraph and --json
shape, with #694's inspect/stage/submit in the verb list and the guarded
endpoints named before "adds no route for the other verbs".
- src/cli-agent.ts (@fileoverview): #708's quick-start / directory spawn
routes and #694's experimental routes in one endpoint list; the two
node:fs/promises imports (#708's realpath+stat, #694's open+stat) merged
into one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflict in CLAUDE.md (Adding Features, App setting) resolved by keeping
both sides: #714's sentence that a setting the server acts on must be
synced, after the `.strict()` clause, and #719's mutateSettingsFile() rule
at the end of the bullet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflict in src/web/routes/system-routes.ts (PUT /api/settings) resolved by
keeping both sides: #718's line that never stores an unauthorized
tunnelEnabled:true runs first, then #719's serialized mutateSettingsFile()
write replaces the inline read and plain writeFile.
test/routes/system-routes-tunnel-guard.test.ts: #718's new tests asserted
plain writeFile calls on settings.json. With #719 every write goes to a temp
file renamed over it, so the assertions read writes through a settingsWrites()
helper (writeFile contents keyed by their rename), and the concurrent-stop
harness applies a write and the stop at the rename.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- src/web/routes/session-routes.ts:2102: the guarded-submit 409 now applies to tagged input (clientId + seq) only; untagged input is held like a WebSocket frame. The raw write (:2228) goes through holdForGuardedLease and answers 200 once held (a send-and-wait reads `delivered` from the held write; a full queue releases the waiter and answers 409); a mux write takes its own turn in writeViaMux.
- test/guarded-lease-held-input.test.ts: real-Session route tests for an untagged raw POST during the lease (written after the Enter) and a held send-and-wait (delivered: true); both fail without the fix.
- test/routes/session-routes.test.ts + test/mocks/mock-session.ts: the 409 test now covers tagged input only; new tests for untagged raw (held), untagged mux (own turn) and a full hold queue (409); MockSession gains holdForGuardedLease/releaseGuardedLease and a lease-aware writeViaMux.
- src/session.ts:4787 (guardedInputHeld JSDoc) + write() + docs/architecture-invariants.md: write() refuses during the lease only, so cron's paste mode can land ahead of input still draining.
- docs/api-reference.md: the input route's 409 is for tagged input; untagged input is held.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Codeman maintainer