The wrapped header strip fell back to the plain wrap whenever its first
tab was wider than the room beside the toolbar. A selected tab is wider
(its gear and close show), so selecting the first tab flipped the whole
strip back: the toolbar took its own column again and, with long names,
every tab took a line of its own. Selecting any other tab brought the
full-width rows back.
The first tab is now trimmed to the room instead (tab-corner-fit, a
max-width from --tab-corner-first-max, its name ellipsized). Only a
toolbar that leaves less than TAB_CORNER_MIN_FIRST_TAB (120px) beside
it keeps the plain wrap, which does not depend on the selection.
Two measuring details make the trim hold:
- the room comes from the rounded-up float width, less the tab's 2px
margin and a pixel for subpixel layout (a tab at the exact width still
wrapped under the float);
- the first tab is measured with its trim cleared and its gear/close
width transitions finished, or a grown room reads the last trim as the
width and a selection change is judged by the width the tab is leaving.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A folder made in a cases directory is already a case (no scaffold), which Link
Existing then refuses by name and which deleting would take the linked folder
with. The route refuses a cases directory as the parent (the shared one and the
caller's own), a leading tilde in the name, and maps a vanished parent to 404.
Docs now say every name it accepts is one Link Existing accepts, and the wiki
describes the button.
The name rule now matches safePathSchema (letters, digits, space and _ - . ~,
no .., no leading dot, at most 255 bytes) so every folder it makes can be
linked. A file as the parent is a 400, errno text is no longer returned,
showHidden is forwarded like browse, and Create is disabled while the request
runs. Adds multi-user scoping tests.
A direct clone whose git-slot wait timed out came back with no spawnError, so
the cleanup emptied a folder git never touched. GitRun now says whether git
started and the cleanup requires it. Cloning into a folder at or inside a
Docker case workspace is refused, as git status, fetch and worktrees do, since
git would run the new repository's hooks and filters on the host.
The picker could only choose an existing folder. POST /api/filesystem/mkdir
creates one folder inside a folder the picker may browse (same roots,
ownership and blocked-tree rules as browse), and PathPicker gains an opt-in
allowNewFolder that adds a New folder button and selects the result.
A direct clone into an empty folder emptied the folder after any failure, which
deleted a concurrent attempt's finished clone when git had written nothing.
Clones into one folder are now mutually exclusive in-process, the cleanup is
skipped when git refused the folder, never ran, or the mount is unresponsive,
and a name linked while the clone ran is a 409 that keeps the folder.
Documents path for POST /api/cases/clone.
The custom folder was treated as a parent, so the repository landed in <folder>/<case name>. The chosen folder is now the clone destination: an empty existing folder is cloned into directly (CloneOptions.intoEmptyDir, no temporary sibling, never removed on failure), a new folder is created, and a folder with files is refused.
Clone Repo could only clone under ~/codeman-cases. POST /api/cases/clone now takes an optional path (parent folder plus case name) and the Clone tab gets a Clone into a custom folder option with a Browse button, mirroring Create in a custom folder. The path is judged by prepareNewCasePath, the clone is registered as a linked case, the option is admin-only in multi-user mode, and an existing target folder is refused.
#722 stopped handing a remote session's workingDir to the Ralph tracker,
which also left isFileAuthoritative false for remote sessions only. That
flag is what keeps the output-based completion guessers off, and it is
true for every local session with a working directory, so a remote loop
could end, and mark every todo done, on a prose line such as "All tasks
completed" while a local one cannot.
setRemoteWorkingDir() records the path without reading or watching the
local disk, so the fix plan stays authoritative as for a local session;
the file still reaches the tracker only through fix-plan/read, over ssh.
The test pins both, and fails on the previous head.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add the L-shaped strip to the Tab layouts section of
docs/architecture-invariants.md, the mechanism file src/web/CLAUDE.md
links to.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Export isPathWithinRoot from file-routes.ts and use it for the remote
@fix_plan.md confinement, so the two checks cannot drift; rewrap the
readRemoteFixPlan JSDoc and say NOT_FOUND; list fix-plan/read and the two
write refusals in docs/remote-sessions.md and architecture-invariants.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
toggleSessionImageWatcher checks the response, so any refusal puts the
switch back and toasts an error instead of a success; architecture-
invariants says the image watcher never watches a remote workingDir.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Note in docs/remote-sessions.md that the @fix_plan.md auto-load does not
run for remote sessions, and rewrap the test's header comment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hand the bracketed frame to the target terminal with input() so onData
scrolls to the bottom, clears the selection, and delivers the bytes.
The paste trap no longer writes the frame itself.
Fixes#716
Co-authored-by: DDT <1786035110@qq.com>
KeyCode 229 recovery forwarded a composed character that xterm had
already delivered, so a desktop dead-key backtick arrived twice.
create() now attaches only when the primary pointer is coarse.
Ctrl+V text paste went through terminal.paste(), which drops the
CSI 200~/201~ markers after a replay clears xterm's DECSET 2004
mirror. Plain text is now a hand-built bracketed frame on the
session input path.
Fixes#716
Co-authored-by: DDT <1786035110@qq.com>
CODEMAN_ALLOW_UNAUTHENTICATED_NETWORK and the new
CODEMAN_ALLOW_UNAUTHENTICATED_TUNNEL (#718), with their CLI flags, join
the documented environment variables the versioning policy covers, from
1.46.0, the release that gave each its own meaning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The merged PRs (mostly #714's git fetch) added about 120 em-dashes in
comments, docs, test names and three settings strings. Each one is now a
comma, colon, semicolon or parentheses. The English settings strings in
index.html and their i18n.js keys change together, and the zh-CN value
for the fetch interval uses full-width parentheses instead of a double
dash. The one left is the regex in constants.js that matches a dash
typed as a word, which is behaviour, not punctuation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
terminalLinkLine() cut the URL's first row at its cell to stitch the URL, so a
path in a later column of that row was never scanned. The cut-off columns now
follow the stitched rows as a segment of their own, mapped back to their cells.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The self-gate now says the skill reads saved Codex conversations offline outside a session; the staging
reference says only tagged input gets 409 during a guarded submit (the rest is held), and the API
reference notes a managed write past a full hold queue falls back to a direct write. Also: missing
reference rows, agent --help naming inspect/stage/submit, the tunnel opt-in in Remote Access, MCP wording.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
readDockerCases() reads an unreadable or half-written docker-cases.json as [], so a fetch (which runs
repository hooks, and runs unattended on the interval) could run inside a Docker workspace. The fetch
paths now read it through a strict reader: the Fetch button answers a failed run (state 'error') and the
scheduler skips the tick, undoes its picks and logs once. The status and diff routes are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts resolved by keeping both sides:
- CLAUDE.md (Agent CLI): #694's opening (an HTTP client, the experimental
agent-session-routes behind agentCoordinationEnabled) with #708's clause
on the directory spawn and its two refusals.
- docs/api-reference.md (codeman agent): #708's spawn paragraph and --json
shape, with #694's inspect/stage/submit in the verb list and the guarded
endpoints named before "adds no route for the other verbs".
- src/cli-agent.ts (@fileoverview): #708's quick-start / directory spawn
routes and #694's experimental routes in one endpoint list; the two
node:fs/promises imports (#708's realpath+stat, #694's open+stat) merged
into one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflict in CLAUDE.md (Adding Features, App setting) resolved by keeping
both sides: #714's sentence that a setting the server acts on must be
synced, after the `.strict()` clause, and #719's mutateSettingsFile() rule
at the end of the bullet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflict in src/web/routes/system-routes.ts (PUT /api/settings) resolved by
keeping both sides: #718's line that never stores an unauthorized
tunnelEnabled:true runs first, then #719's serialized mutateSettingsFile()
write replaces the inline read and plain writeFile.
test/routes/system-routes-tunnel-guard.test.ts: #718's new tests asserted
plain writeFile calls on settings.json. With #719 every write goes to a temp
file renamed over it, so the assertions read writes through a settingsWrites()
helper (writeFile contents keyed by their rename), and the concurrent-stop
harness applies a write and the stop at the rename.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- src/web/routes/session-routes.ts:2102: the guarded-submit 409 now applies to tagged input (clientId + seq) only; untagged input is held like a WebSocket frame. The raw write (:2228) goes through holdForGuardedLease and answers 200 once held (a send-and-wait reads `delivered` from the held write; a full queue releases the waiter and answers 409); a mux write takes its own turn in writeViaMux.
- test/guarded-lease-held-input.test.ts: real-Session route tests for an untagged raw POST during the lease (written after the Enter) and a held send-and-wait (delivered: true); both fail without the fix.
- test/routes/session-routes.test.ts + test/mocks/mock-session.ts: the 409 test now covers tagged input only; new tests for untagged raw (held), untagged mux (own turn) and a full hold queue (409); MockSession gains holdForGuardedLease/releaseGuardedLease and a lease-aware writeViaMux.
- src/session.ts:4787 (guardedInputHeld JSDoc) + write() + docs/architecture-invariants.md: write() refuses during the lease only, so cron's paste mode can land ahead of input still draining.
- docs/api-reference.md: the input route's 409 is for tagged input; untagged input is held.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- test/cli-agent-project-spawn.test.ts:345: the doc-sync test no longer reads .changeset/project-worker-directories.md (changeset version deletes it at release); README, API reference and wiki stay.
- CLAUDE.md:132 + src/cli-agent.ts @fileoverview (invariant 5): the directory spawn (POST /api/v1/sessions plus /interactive or /shell, no Agent-Origin header, so no marker) and its refusals (empty --working-dir, bare spawn from a HOME cwd); the invariants now name test/cli-agent-project-spawn.test.ts too.
- test/cli-agent-project-spawn.test.ts:322: "allows a cwd below HOME" mocks the cwd to <temp HOME>/src/app, so it covers the case the guard must leave alone.
- docs/wiki/Driving-Codeman-From-An-Agent.md:59: split the sentence so exit 4 covers only the empty --working-dir; spawn "" reaches quick-start and exits 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- constants.js:2296,2301 spacedFilePathOnLine: refuse a first word ending in `$`
and an earlier word with no letter or digit (other than a bare `-`), so a
shell prompt showing an absolute working directory (`/mnt/c/proj ❯ code
notes.md`, `/home/me/proj$ cat notes.md`) keeps master's links; the six rows
from the review are pinned, plus OneDrive, `Program Files (x86)` and
`Docs - Copy` still linking whole.
- constants.js:2312: the leading strip is now `/^(?:~?\/|(?:\.\.?\/)+)/`, so
`Saved to: ../My Docs/plan.md` links whole; an interior `..` still links
nothing. Tests for the detector and the terminal provider.
- app.js:3032 _linkifyFilePaths: carry any leading bold label and let
spacedFilePathOnLine() judge it, and give a text node that follows another
inline element a placeholder word, so `**Note:** /home/me/proj/out
report.pdf` and ``Use `--config` /home/me/proj/cfg data.json`` split as in
the terminal; a spaced path inside inline code still links whole. The
now-unused label-pattern guard is gone.
- JSDoc (findFilePathLinks, SPACED_FILE_PATH_LABEL_PATTERN,
spacedFilePathOnLine) and the spaced-path paragraph in
docs/architecture-invariants.md updated to match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- session-ui.js _reloadCasesAfterRun: reload onto the toolbar's own case after every launch, not only one that names its case; comment updated
- test/tab-new-session.test.ts: a worktree tab's "+" Claude launch, the toolbar Run and a group's "New session" each keep the toolbar's case after a "+" moved lastUsedCase (fail without the fix); the reload setup is shared with the existing lastUsedCase test
- docs/architecture-invariants.md:349: the _reloadCasesAfterRun sentence covers every launch
- app.js _openTabLayoutMenu focusout: focus landing on the trigger is not a departure, so pressing the "+" again closes its picker in a real browser
- tab-rail-resize.js openTabRailActionMenu: close the group menu too, so the rail's ... pressed again does not leave the picker beside the row menu
- tab-rail-resize.js:329-331: the "New session here…" comment no longer says Enter on the "+" does nothing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- src/web/settings-writer.ts:110: export assertSettingsWritable(), the writer's own read-for-write rule run on its own
- src/web/routes/case-routes.ts:1860: an admin's rename checks settings.json before it ends any session or moves the folder, and answers 409 CONFLICT with the writer's message (placed before the session-starting check, so nothing is awaited between it and the lock)
- test/routes/case-rename-routes.test.ts:314: the torn-file pin now expects 409 CONFLICT (no stoppedSessions, like the other pre-checks)
- test/routes/case-rename-routes.test.ts:331: new test, a live session with stopSessions and a torn file: 409 CONFLICT, cleanupSession not called
- docs/api-reference.md: the Settings paragraph says an admin's rename answers this refusal as 409 CONFLICT before ending sessions
- src/hooks-config.ts:1161, src/prompt-cache-keepwarm.ts:341: comments describe the atomic writer, not an in-place rewrite
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- constants.js:2618 terminalUrlContinuationExtent: trailingColumns now needs a
one-row first line (first.startRow === first.endRow), so a URL row that
soft-wraps with a column on its wrapped part no longer glues the next row
onto that column (`/tmp/report.txtccc/x.html` at 41 columns); master's links
come back. Negative tests for the extent and the link provider.
- constants.js:2847 terminalCellWrappedPaths: comment reworded to match the
JSDoc (the exception is a left-column PATH), plus the wrapped-prose case.
- docs/architecture-invariants.md, CLAUDE.md: one clause that a left column of
wrapped prose (a Description | Path table) also fills the continuation row,
so the path beside it keeps its per-row fragment links, the safe direction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- docs/architecture-invariants.md DeepSeek mechanism (1): the decoder stops at the first frame only before Node 24.22 and 26.10 (nodejs/node#65865)
- src/deepseek-transcript.ts:33: reflow the over-long comment line to the width of the lines around it
- docs/deepseek-integration.md:241: same reflow
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- docs/api-reference.md:1222: the tunnel status shape is { running, url, loginConfigured } (getStatus() returns only running and url)
- src/web/routes/system-routes.ts:1233: the unauthenticated-tunnel warning keys on !isLoginConfigured(), so it no longer fires in multi-user mode
- test/install-sh-invariants.test.ts:537: install.sh must not contain --allow-unauthenticated-tunnel either (it writes service argv as well as env)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The input lease is held across the awaited tmux Enter, so WebSocket frames
keep arriving while it is held. A tagged frame (seq N) was refused and its
seq rolled back, but the browser's WebSocket path does not wait for ACKs:
seq N+1 landed after the lease and moved the watermark past N, and the
redelivered N was then dropped as a duplicate. The keystroke was lost.
Input that arrives during the lease is now held and written in arrival order
when the lease is released, whatever the submit's outcome. A WebSocket frame
is applied and ACKed only once written; managed writes (writeViaMux) and
named keys (send-key) wait for their turn the same way, and a held write that
is still being sent holds everything behind it. A keystroke held before the
guard runs still moves the input revision, so it still invalidates the Enter.
The hold is capped per lease (256 inputs, 1 MiB): past it the WebSocket is
closed with 1013 and nothing later from it is applied, so the browser resends
every unACKed frame in order, and send-key answers 409 CONFLICT instead of
logging a tmux failure as INTERNAL_ERROR. POST .../input keeps its 409 for the
lease plus the held input's drain; its browser drainer is serialized.
Docs: correct the api-reference paragraph that said these keystrokes are
redelivered, and describe the capture fallback and the per-scope cursor cap
from the previous two commits in api-reference, architecture-invariants and
the changeset.
`codeman agent spawn` always sends its directory as an explicit
workingDir, so the server cannot apply its no-workingDir rule and
installs workspace hooks (and an injected skill) into ~/.claude when the
caller's cwd is HOME. A bare spawn whose cwd resolves to the home
directory now refuses with exit 4 before any request and names
`--working-dir ~`; an explicit `--working-dir ~` is still sent. Paths
are compared by realpath, so a symlinked HOME matches, and an
unresolvable HOME or cwd falls back to the resolved path without
throwing.
The directory-spawn --json shape now reads the same in the README, the
API reference, the wiki page and the changeset: `ready` when a
readiness wait ran, `readinessError` when that call failed, and
`startupError` when the start failed. A test pins all four.
The network acknowledgement that install.sh writes for every passwordless LAN install also satisfied the tunnel guard, so one click on the welcome screen's tunnel link published full terminal control to a public URL with no login and no confirm. The tunnel now needs CODEMAN_ALLOW_UNAUTHENTICATED_TUNNEL or --allow-unauthenticated-tunnel (carried by web -d and service install), and with no login the browser asks before every enable, reading a new loginConfigured field from GET /api/tunnel/status.
The guard is now decided once per request and required again where the tunnel starts, so a save that found the tunnel running can no longer restart it unguarded after a concurrent stop.
Closes#706
Quick-start saved lastUsedCase with an un-awaited, non-atomic read-modify-write, and the settings PUT, model config, case order, case rename, Ralph start and the boot tunnel reset each ran their own. Two overlapping truncate-then-write calls left one write's bytes over the tail of the other (the CI flake in test/quick-start.test.ts), and most writers then read the torn file as {} and wrote back only its own keys, erasing the rest of the user's settings.
All of them now go through one writer that runs one change at a time, replaces the file atomically, and refuses (409 CONFLICT) to overwrite a file that does not parse.
The + announces a menu but Enter and Space did nothing on it, and the header strip has no row menu to fall back on. A + on a Docker tab the toolbar has not selected read only the link-time mode list, since nothing probed its container.
Opening the picker from the keyboard focuses an entry, so a held Enter or Space repeated onto it and launched that CLI; the shared tab-layout menu now ignores a repeated Enter or Space.
Codeman maintainer