Only the two session routes asked launchRefusalMessage(). The attach that
finds no pane, the respawn of a dead pane (a click on the tab, a respawn
start, the boot recovery), restartCli() and the reboot-restore rebuild
started an agent on the endpoint unasked. Session gains setLaunchGuard(),
asked right before a NEW agent process is started and never for an attach to
an agent that runs; WebServer.setupSessionListeners() sets it for every
session; a refusal is a LaunchRefusedError that never falls back to a direct
PTY. The reboot-restore route asks before it builds and skips the entry with
its own reason, left on offer.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The connect step records the connection in the state file BEFORE it writes
the endpoint record and the settings flag (the flag's earlier value read by
inspectLocalEndpoint()), so a state write that fails or a server killed
between the two never leaves a record of ours that the state file does not
know; a record under the reserved id that says exactly what ours would say
is ours. changePort() writes the state first and puts the old port back when
the endpoint move is refused.
A job whose end could not be written (a full disk) is kept in memory: the
view shows it, Resume and a new install start from it, the next verb writes
it, and Cancel never answers a 500. A first install on a full disk is a 507
with the sentence. "installing" in the file while this process runs no job
always reads as paused or that failure.
An installed model whose runtime does not start says so (runtime-start-failed
with Start as the next step, and the launch check says it too); the stored
runtime version is started while its folder is unpacked. Stop, Remove and
the boot of anything that is not a running installation end a runtime an
earlier server left behind before any file is deleted. Stop and "Use another
port" answer 409 sessions-open while a live session uses the model. A pull
that failed because the runtime is gone is runtime-stopped, not a network
problem. After "does not fit" only a model that needs less memory is offered.
A replaced job's partial blobs are deleted. Every 400 carries its sentence as
data.message, and the six inline sentences are labels with zh-CN entries.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The supervisor reports the child's pid the moment it is spawned, before it
answers, so a server killed during a start still leaves a pid that names the
runtime as ours. stop() takes that stored pid (previousPid) and ends a
runtime an earlier server left behind when its command line is a binary
under our runtime folder, so no caller deletes the folder under a live
process. start() takes a version: an installed model keeps the runtime
version it was installed with when a later build pins another one.
removeLocalModelFiles() refuses a local-model folder that is itself a
symbolic link (every check compared against the real path of the root, so
a link in its place passed whatever it pointed at). removePartialModelBlobs()
deletes what an interrupted download left in the model store, which the
runtime answers "not found" for and never deletes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The real routes, service, recommendation, runtime download and unpack,
supervisor, pull, checks, connection and state file, joined together. Only
the runtime (a fake HTTP server the injected spawn "starts"), the hardware,
the coding agent's installer and the waits between retries are stand-ins.
Walks: the whole install and its removal (the folder is gone, the settings
flag is restored); a runtime download that arrives damaged; a model download
that fails twice and then succeeds; one that keeps failing; a model that
calls no tool; Cancel during the model download; a server restart during the
model download, which comes back paused and waits for a click.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
docs/local-models.md is the guide: the steps, the layout on disk, what is
written outside the folder, the failures and their next steps. The API
reference documents the install object and the five verbs, and how the list
is ordered. The rules for the server side are in CLAUDE.md and
architecture-invariants.md, the user-facing pages in the wiki.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The read-only card is gone. The welcome screen has one button, "Run a local
model" ("Local model" once one is installed), and App Settings > Models has
one row; both open the same window.
The window follows `install.state`: choose a model (a radio group, with a
memory bar filled to what the selected model needs), confirm the sizes and
the folder, watch the download and the steps, and end on "Start a session".
Paused, failed, installed (running or stopped), Remove and "no model fits"
are screens of the same window. It polls the GET once a second while open.
Every dynamic string goes in through textContent, labels and sentences come
from the payload, no CLI id is compared, and every new string has a zh-CN
entry.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
POST /api/local-model/install, cancel, resume and runtime, and DELETE
/api/local-model. The GET gains an `install` object the window polls. All of
it is experimental and admin only in multi-user mode.
One job of five steps (runtime, model, verify, agent, connect) driven by a
pure reducer over explicit state, step and transition tables. One job at a
time (409). The consent is bound to the size shown: `acknowledgedBytes` must
be the server's own total (409 size-changed). A job a server restart
interrupted comes back paused and never continues without a click. Every
failure is a code with one next step.
The model is judged against the budget the runtime measured before it is
downloaded. A missing coding agent is installed with its stock command
through the shared runner, audited. Connect writes one endpoint record under
the reserved id through mutateCustomModelHosts() and switches
customModelEndpointsEnabled on through mutateSettingsFile(), remembering the
flag's value. The model's digest is stored and read again at boot and before
every session start on that endpoint; a changed model refuses the launch.
Remove answers 409 with the session names while a live session uses the
endpoint, undoes the two writes first, restores the flag only when this
feature switched it on and no other endpoint is saved, and deletes only
inside local-model/. The coding agent stays.
The server starts the runtime at boot when a model is installed and stops
it at shutdown beside stopDeepSeekWeb().
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The four endpoint routes and the 5-minute discovery sweep each read
custom-model-hosts.json, changed their copy and wrote it back through one
shared temp file name. Two of them at once could tear the file or drop each
other's record: ten creates sent together did not all land.
Every write now goes through mutateCustomModelHosts() (one promise chain, a
random temp name, mode 0600), with each check inside the same step as its
write. A file that does not parse is refused with 409 and never replaced.
A delete of an unknown id no longer rewrites the file. A guard test fails
any other writer in src/.
The id `local-ollama` is reserved for the model Codeman runs on this Mac: a
new endpoint may not take it, and while the record is the managed one it is
not edited, deleted or re-discovered from these routes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The runner that executes a CLI's stock install command (the environment
without CODEMAN_*, the npm prefix redirect, the bounded process group, the
one install per CLI at a time) moves from cli-registry-routes.ts to
src/cli-install-runner.ts, so the local model install can use the same one.
The route re-exports installEnv and npmGlobalPrefixWritable and behaves as
before; its tests are unchanged.
New in the shared module: an abort signal that kills the process group,
stockInstallCommand() (the compiled stock command, never the clis.json one)
and tryBeginCliInstall(), the one install slot per CLI for both callers.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
runtime.ts: the runtime is pinned in a compiled constant (version, URL, size,
sha256). The archive is streamed to a .partial file while it is hashed,
continued with a Range request, retried at most 3 times, and the hash is
compared before anything is unpacked; a mismatch deletes the file. It is
unpacked with /usr/bin/tar into a temporary folder and renamed.
The supervisor runs the runtime as a non-detached child with an environment
built from an allowlist by the pure runtimeEnv(), on a port chosen once by
binding. It restarts the child at most 3 times, stops it with SIGTERM, adopts
or replaces its own orphan on the port and answers port-in-use for any other
listener. parseInferenceComputeTotal() reads the device total the runtime
logs when it starts. Under vitest nothing spawns or fetches.
ollama-client.ts: the pull is parsed incrementally by a pure parser (a 23 GB
pull is about 1.4 million lines), with up to 5 retries on an error line or a
cut stream. verifyModel() loads the model with one tiny chat, checks what the
runtime reports (all on the GPU, the chosen context) and makes one tool
probe; each failure is a code.
developer-tools.ts: only /usr/bin/xcode-select -p, bounded, darwin only.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The catalogue rows carry the figures measured on a Mac (the MLX build of
qwen3.6:35b-a3b is 23,105,798,956 bytes, about 37 KB held per context token,
about 3 GB of runner overhead, about 5 GB more for a moment while a long
prompt is processed). A model's need is now its peak. Rows that were not
measured use the same per-token and overhead figures and say `estimated`.
qwen3.6:35b-a3b gets the tested entry for an Apple M5 Pro with 48 GB and
OpenCode, with its measured 67.7 tokens per second, so that row may say
"Tested on a Mac like this".
The ranking changes with it: a pair tested on a Mac like this one comes
first, then speed (ok, unknown, slow), then model rank, harness rank and the
larger context. The fit grade decides whether a row is listed and what it
says, it no longer sorts, so a model is offered at the largest context it
fits at. recommend() takes the budget the runtime measured
(`budgetSource: measured`), and modelFitsBudget() judges one model against it.
Candidate rows now always carry `needSource`, `harnesses`, `installBytes`,
`installGb` and, where one applies, `tag`. `kvBytesPerToken` and the prompt
cache tiers are gone.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- `LocalModelService.launchRefusal(endpointId)`: what a session launch asks
before it starts on the managed endpoint. It answers the error that
refuses the launch (the runtime child is not alive, another program holds
the port, the runtime keeps stopping, the model's digest changed) or
nothing. New error code `runtime-not-running` with its sentence, for a
runtime the person stopped: only a refused session start says it.
- The fake runtime's MacBook log line is rebuilt from the two values the
measurement notes quote, so it is `INFERENCE_COMPUTE_LINE_MACBOOK` now.
Only the Mac mini line is a verbatim capture and keeps `REAL_`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The types, the module skeletons and the test fake that let the runtime, the
install job and the window be built at the same time.
Types:
- src/types/local-model-install.ts (new): the runtime pin, the install
states, steps and error codes with one sentence and one next step each,
the progress, the `install` object of GET /api/local-model, the bodies and
409 answers of the install verbs, the state file. `LocalModelStatus` moves
here; `install` is optional until the route emits it.
- src/types/local-model.ts: the catalogue row's Mac memory figures, the
measured speed of a tested entry, the `measured` budget source,
`RecommendOptions`, and the row tag, the coding agents and the install
total of a candidate. All optional until the catalogue and `recommend()`
carry them, so the read-only stage keeps compiling and its tests stay
green.
Modules with final signatures and bodies that throw:
runtime.ts (the compiled pin is final), ollama-client.ts, developer-tools.ts,
state-store.ts, install-job.ts (the state, step and transition tables are
final), connect.ts, custom-model-hosts-writer.ts, cli-install-runner.ts.
Nothing imports them yet, so the server is unchanged.
Implemented: paths.ts (every folder of the feature, from dataPath()), and
`modelFitsBudget()` in recommend.ts, the judgement the job makes with the
measured budget before it downloads a model. `recommend()` takes the options
parameter and does not read it yet.
Test fake: test/fixtures/fake-ollama.ts, a runtime on a port the system
picks, in the shapes measured on a Mac: version, tags, ps, the pull stream
(MLX and GGUF lines, an error line, a cut stream, a resumed pull), chat with
and without a tool call, the model list, a runtime archive with Range
support, and a fake child process that logs the device total.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- docs/api-reference.md: GET /api/local-model is labeled experimental
until the step that sets a model up ships, so its payload is not a
stable /api/v1 contract one stage before that step changes it. The
section now describes the verdict as judged, the three sentences of
the memory reason, the notes, the speed rounding and which size to
show as the installed memory. The os-fallback description was wrong:
the free disk space is reported there too.
- docs/versioning-policy.md: the route is listed under the experimental
surfaces.
- docs/wiki/Settings-Reference.md: App Settings > Models > Model on this
Mac, in the words of a user.
- CLAUDE.md and src/web/CLAUDE.md: the invariants the code relies on
(read-only, the probe, harness rows as data, the meaning of limited,
the word Recommended, one unit, labels from the payload, when the
card and the group show).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Review fixes for the read-only recommendation and its card.
Recommendation (pure):
- `limited` is now a statement about the Mac: no model with 12 billion
parameters or more fits. It is judged on everything that fits, before
the disk filter and whatever the pick is. A 32 or 36 GB Mac whose pick
is a 9B model no longer reads "This Mac can run a small model" above a
list of 20B, 27B and 35B models, and knowing the chip no longer lowers
the verdict. A small pick under `ok` carries a note that says so.
- A model that fits the memory but has no room on the disk is no longer
dropped in silence: the best-ranked one is named in a note with the GB
that are missing. A full disk cannot turn a 48 GB Mac into a
small-model Mac.
- "Models fit, but not at a context a harness needs" has its own
sentence with the budget and the need, worded as an estimate. The
16 GB Mac mini misses by 1.3 points (10.3 of 10.4 GB) and was told
flatly that its memory is too little, the sentence of an 8 GB Mac.
- The installed memory is named by the size the Mac is sold as (48, not
51.5): the hardware line and the memory sentence. Every computed size
stays decimal GB from the one formatter. An unknown memory size is no
longer reported as "0.0 GB".
- Slow is graded on the unrounded speed: 9.95 to 9.9996 tokens per
second printed as 10 and read ok.
- The disk sentence names the 10 GiB that must stay free, so its
numbers add up for the reader.
Card and Settings group:
- The Settings group "Model on this Mac" is hidden on a server that is
not a Mac, and until the first answer says it is one.
- Only `403 FORBIDDEN` is a refusal. `403 PASSWORD_CHANGE_REQUIRED`
(an admin who must change the password) is a failed request and is
asked again, so that admin no longer loses the card until a reload.
- Each fit and speed label carries what it measures as its tooltip and
accessible name, an alternative with a speed estimate prints it, and
the count beside "Other models that fit" is gone (it was the number
of rows, capped at four, not the number of models that fit).
- The line saying nothing can be set up yet sits right under the pick,
in the colour of every other line (it was 3.9:1), and says whose step
it is.
- The dismissal key is named for this stage, so hiding the read-only
card does not hide the install offer later.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The label list was "frozen for the parallel build" and the card's test said
the route answers 501: both were true while the pieces were written side by
side and are not any more. Comments only.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A "Local model recommendation" section in the API reference: the read-only
route, its admin gate in multi-user mode, why a failed probe is a 200, and
every field of { hardware, recommendation, catalogUpdated }, including that a
size travels as bytes and as decimal GB text.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The read-only face of GET /api/local-model: what the Mac the server runs on
can run as a local coding model.
- local-model-ui.js: one builder paints both containers from the same
payload: the hardware line, the server's headline, the pick with its numbers
(context, download, memory need against the budget, speed), the server's
notes, the other models that fit with their Good, Tight, Slow or Speed
unknown labels, and one line saying that setting it up from Codeman is the
next step and is not built yet.
- The welcome card ships hidden and shows only once the server answered for a
Mac. It stays hidden for not-macos, for a refused request (a non-admin in
multi-user mode) and after "Hide", a per-device localStorage key. The App
Settings group "Model on this Mac" (Models) carries the loading and failure
sentences and is the way back after a Hide.
- Every dynamic string goes in through textContent, both containers are
data-i18n-skip and the module translates its own sentences, repainting on a
language change. Sizes are printed as sent. Labels and harness names come
from the payload: the module names no CLI and the word "Recommended" is not
in it.
- One request a minute at most, shared while in flight; a failed refresh keeps
the last answer on screen.
- i18n.js: zh-CN entries for the module's strings and for every server label.
- frontend-cli-no-id-branching.test.ts scans the new module.
Tests: test/local-model-ui.test.ts (JSDOM over the real markup),
test/local-model-i18n.test.ts.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The read-only route behind the recommendation, and the one module that reads
the CLI registry for it.
- harness-facts.ts: one fact per catalogue harness row, resolved in the CLI
registry at call time: the registry's label, `installed` from the existing
availability probe (asked once per build), `installable` for a stock CLI
whose install command for this platform needs no administrator rights, and
`acceptsModelId`, the test a custom model launch applies to the model id.
A row whose CLI is unknown, disabled or has no custom model mechanism gets
no fact. No CLI id is compared with a literal.
- routes/local-model-routes.ts: answers { hardware, recommendation,
catalogUpdated } in the usual envelope and reformats nothing. Admin only in
multi-user mode (403), checked before anything is probed. A failed probe is
an answer (200, the hardware's `source` says what was read); a 500 is left
for a fault in the catalogue, the harness facts or recommend(). It writes no
file and reads no setting.
Tests: test/local-model-harness-facts.test.ts,
test/routes/local-model-routes.test.ts (app.inject(), no port; the temp HOME
is byte-identical before and after the requests).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The core of the read-only recommendation: what this Mac is, what the catalogue
knows, and which model fits. Nothing is downloaded, installed or written.
- hardware.ts: one bounded async spawn of /usr/sbin/sysctl with seven keys,
without -n, parsed as "key: value" lines by the pure parseSysctl(). Free disk
of the data dir through statfs behind the bounded path probe. Fallbacks from
node:os, a 60 s cache, never throws, never system_profiler. A wired limit of
0 means "not set".
- local-model-catalog.ts: seven models, three harness rows (pi gated) and the
chips table as a compiled constant, validated by a Zod schema on first use.
No override file. Model ids are name:tag in lowercase without a slash; every
model carries paramsB and an (empty) tested list. Chip names match on the
end of the chip string, so 'M4' is not the chip of 'Apple M4 Pro'.
- recommend.ts: device budget (the wired limit when above 0, else 2/3 of
memory below 36 GB and 3/4 from 36 GB, less the reserve), need = weights +
KV cache + 1 GiB + prompt cache, fit good up to 0.85 and tight up to 0.98,
speed ok, unknown or slow (a chip in no chips row is unknown), and the
ranking. Verdicts ok, limited (best model under 12 billion parameters) and
none with its reason. "Recommended" only for a pick with a tested entry for
this Mac, which no row has today.
- types/local-model.ts: comments brought in line with the code (chip matching,
budgetShare rounding, a budget of 0 on an Intel Mac).
- cli-registry-no-id-branching.test.ts: the guard also catches a comparison of
a `cli` field with a CLI id (plus one stray blank line Prettier refused).
Tests: test/local-model-format.test.ts, test/local-model-hardware.test.ts
(the captured output of two real Macs), test/local-model-catalog.test.ts,
test/local-model-recommend.test.ts.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The contract three builders code against in parallel. Nothing is recommended
yet: the route answers 501 and the catalogue is empty.
- src/types/local-model.ts: HardwareFacts, the catalogue rows, HarnessFact,
Candidate, Recommendation, LocalModelStatus, and LOCAL_MODEL_LABELS, the one
list of sentences the server may put into the payload (the zh-CN dictionary
is keyed by them).
- src/local-model/format.ts: formatGb, the one place a byte count becomes a
size a person reads (decimal GB), and memClassGb.
- src/config/local-model-catalog.ts: the Zod schema (model ids are name:tag,
lowercase, no slash) and an empty stock catalogue. No override file.
- Skeletons with their final signatures: hardware.ts, recommend.ts,
harness-facts.ts, routes/local-model-routes.ts (injectable dependencies),
public/local-model-ui.js with its script tag.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
changesets/action copies a CHANGELOG.md section into the release as it stands,
so a whole release rendered as one bullet behind its commit hash, with
`### Thanks` as literal text and "Minor Changes" as the only real heading.
The Release workflow now rebuilds the body from that section: Thanks first,
then What's new with a heading per change, Fixes, Also in this release and a
compare link, with "Behaviour change:" and "Breaking:" in bold. The release is
titled `Codeman <x.y.z>`; the tag stays `codeman@<x.y.z>`, which is what the
updater and the update toast read.
This cannot be written into CHANGELOG.md instead: `### <Type> Changes` is
hardcoded upstream, and a `## ` line would end the section for changesets/action
and versionSection(). So the changelog keeps its format and the toast is
unaffected. npm has already published when the step runs, so a formatter failure
leaves the changesets text with a warning and the retag still happens.
SECTION_LABELS is now shared with whats-new.mjs so the toast and the page agree
on what counts as a headline. docs/releasing.md records the changeset shape.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The registry does not follow npm, so every release waited on a by-hand
mcp-publisher publish, behind a browser login that expires between
releases.
Release now calls publish-mcp.yml once npm took a release. It signs in
with the workflow's OIDC token, which the registry accepts for the
io.github.Ark0N/ namespace, so it needs no secret and no browser. It skips
a version the registry already has, waits until npm serves a new one, and
can be run by hand with gh workflow run publish-mcp.yml.
The id-token right sits on its own job, which runs nothing from the
repository: it reads server.json and runs one pinned, checksummed binary.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Quick-start wrote a selection's launchModel into the session's stored
<Mode>Config, which is what a clear falls back to, so a clear relaunched
the CLI with the endpoint's model id on its native backend. Only API
callers can reach that, since no page sends a clear.
The first launch now takes the forced model from the session's selection,
through the same _withCustomModelLaunchModel() the respawn path uses, so
the stored config keeps the model chosen at create. That also carries the
model onto a new tmux session for a selection applied to a running
session, which the create path used to lose.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Owner decision for 1.49.0: a container or ssh tab keeps using this
host's /tmp and paths, with gating planned as a follow-up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The button sat empty in the page while its strip was hidden, which the
mobile accessibility suite counts as a button with no name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
classifyDotGit() checked with lstat and then opened by name, so a FIFO
swapped in between the two blocked a threadpool worker. The open itself
now refuses both, and the handle is judged.
Reported on #772.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Takes the contributor's wording for the picker title and the toast, the
preview refresh after the preflight and the clearer 409 text, and keeps
the fuller tests and the invariants paragraph from the release branch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
1.48.0 reads an adopted tab as an ordinary session and drops every adoption
guard, and nothing in 1.49.0 can change what an older server does, so it takes
a line in the release notes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Compose deployment still on the example password can no longer restart or
update through this script, and no changeset said so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The poll had no hidden-tab gate, and the local scan's 5 s cache sits under the
8 s interval, so a single tab never hit it: every tick was a full socket sweep
(1.1 s and 772 forks on a box with 212 sockets) for a list nobody was reading.
`_foreignPollTick()` is now the one gate for the first load, the timer and the
return to a visible tab. The `visibilitychange` listener is stored and removed
in `stopForeignPolling()`, since this runs on every trip to the home screen.
Checked in real chromium with document.hidden stubbed: 2 polls in 9.5 s visible,
0 in 17.5 s hidden, 1 on return, and a tab opened in the background makes none
until it is shown.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A subfolder whose bounded probe answered `unknown` came back as `children: []`
with no `incomplete` and `truncated` false, so a dead mount, or a healthy one
slower than the 1.5 s probe on first touch, read as an empty folder and a
search missed it in silence. `unknown` is never `absent` (#516).
Such a folder now goes on the walk's `unread` list, which flags the node and
sets `truncated` in both walks. A folder the filesystem says is gone drops out
quietly as before. The row said "file limit reached", which would be false
here, so it now reads "Not fully scanned" for either reason.
Reproduced on a real disk with a parent at mode 0444, where the child's stat
answers EACCES: the API, the search and the panel all report it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
That description is the only warning that the switch weakens Codex's
sandbox, and it had no zh-CN entry. The test runs the real translator over
the real index.html.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
README.md was corrected when remote Edit history shipped. The Chinese line
still said nothing is copied to the Codeman host, while a remote session's
diffs are stored there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
resolve_admin_mode keeps a non-admin Mac account on the system route when it
can write to Homebrew. The wiki and both READMEs left that out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The field had no mention. It opens the sandbox's network and does not touch
codex's approvals, so it sits beside the sentence about them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adopting a tmux session is admin-only and Codex Allow network access needs a
grant. The multi-user page listed neither.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A session named codeman-* or claudeman-* on any socket is dropped with no
note, which contradicted the docs. paneCwd is absent for an adopted session,
and only a claude wrapper reports statusLineExporter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The adoption section said every git route answers unsupported, but git-diff
and git-fetch-settings answer 400, and the Git status section listed only
remote and docker. Edit history's `adopted` reason was documented nowhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
105 new em-dashes sat in comments, test names and one test fixture from the
foreign tmux adoption work. Replaced by hand with commas, colons or
parentheses, one reading at a time. The fixture now quotes the real refusal
text, which says "It may still be running, try again."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clone Repo's picker now offers New folder, and with the field empty Browse
opens in the cases folder, so the first press there lands on this refusal.
It pointed at Add Case > Create New, which cannot clone. The sentence has to
read right from every picker that offers the button, so it names both tabs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clone Repo's custom folder became a parent that must already exist (#774),
while its picker still had no New folder button (#761 turned it on for
Create New only). A parent that does not exist yet was refused with no way
to make it from the form, so the same job worked on one tab and dead-ended
on the other.
The test pin that kept Clone off dated from when the field was the exact
target, which could be a folder not yet created. Clone moves to the on side
of that pin, so every picker in the file stays covered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Codeman maintainer