A new install has no seen list, so every new OpenCode user was still warned about
an October incident that is long over. The mechanism stays for the next notice;
an empty list is now a valid file, and the validators keep running over whatever
it holds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Classify OpenSSL and LibreSSL's SSL_connect errors as unreachable again (`_` is a
word character, so \bssl\b missed them and the user read the temp directory as the
reason), point a cases-folder refusal at Clone Repo instead of Create New, and move
the mechanism and history out of CLAUDE.md into architecture-invariants.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It sat between the "two places" list and the paragraph starting "It browses",
so that "It" read as New folder, and it said the button is not offered inside
the cases folder when the button shows and the route refuses.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
selectSession() toggles .active at once while _syncTabStripCorner() only runs in
the debounced render, so a cap set after measuring left a newly selected first
tab wider than the room and dropped the first row below the toolbar until then.
max-width changes nothing on a narrower tab, so the cap is simply always on, and
the clear-before-measure and finish-the-animation loops go. The no-usable-room
test uses 8 tabs: at 40 the scroll fallback fires first and it passed at any
threshold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both _abandonTunnelEnable() returns come after saveAppSettingsToStorage() wrote
the new values to this device but before _unsavedSettingsBaseline was set, so
after cancelling the no-password prompt the next Save sent no
showPlanUsageLimits flip and did not reload for a gesture-control change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Codeman was added to the Coding Agents section of NipunaRanasinghe/awesome-ai-agents (their PR #245, merged 2026-11-04).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Round-four review smaller item: one getCustomModelForPersist().launchModel expectation, like the pi/grok/omp tests beside it, pins #750 on the one-shot path.
Round-four review smaller items: api-reference now states the opposite-of-apiKey behaviour for an omitted defaultContextLength, and the wiki sentence follows the code, modelContextLengths[id] ?? defaultContextLength: any stored figure beats the default.
Round-four review smaller item: the discovery comment claimed a shared ceiling while schemas.ts restated the literal twice; the constant now lives in schemas.ts (routes already import from it, no cycle) and both bounds reference it.
Round-four review item 4: focusing the search input on every picker open raises the OS keyboard over the list on phones; guard it the way readmymind-ui.js does.
Round-four review item 3: the swap route wrote the new config.toml into the very dir a live codex session uses as CODEX_HOME before checking the pattern, and its refusal then deleted that dir. buildCustomModelInjection is pure, so the check runs on its result and a refused id never touches the filesystem. Pinned by a two-apply codex route test.
- share one context-length resolution (discovered figure, endpoint default fallback) across the routes and boot recovery, with a recovery test
- record listed per-slot context figures with a slot count of 1 and force the slot-count fallback once per rediscovery
- open up the codex model launch token for qwen3-style ids (model-plain-colon), pinned by a spawn-golden case
- pass the full discovered window to opencode as limit.context
- translate the picker search strings and document the discovery precedence
- opencode: write limit.context/output from the discovered context length (#749)
- codex: override the native launch model when a custom endpoint is selected (#750), and set model_context_window
- model picker: add a search/filter box with a no-matches line
The wrapped header strip fell back to the plain wrap whenever its first
tab was wider than the room beside the toolbar. A selected tab is wider
(its gear and close show), so selecting the first tab flipped the whole
strip back: the toolbar took its own column again and, with long names,
every tab took a line of its own. Selecting any other tab brought the
full-width rows back.
The first tab is now trimmed to the room instead (tab-corner-fit, a
max-width from --tab-corner-first-max, its name ellipsized). Only a
toolbar that leaves less than TAB_CORNER_MIN_FIRST_TAB (120px) beside
it keeps the plain wrap, which does not depend on the selection.
Two measuring details make the trim hold:
- the room comes from the rounded-up float width, less the tab's 2px
margin and a pixel for subpixel layout (a tab at the exact width still
wrapped under the float);
- the first tab is measured with its trim cleared and its gear/close
width transitions finished, or a grown room reads the last trim as the
width and a selection change is judged by the width the tab is leaving.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A folder made in a cases directory is already a case (no scaffold), which Link
Existing then refuses by name and which deleting would take the linked folder
with. The route refuses a cases directory as the parent (the shared one and the
caller's own), a leading tilde in the name, and maps a vanished parent to 404.
Docs now say every name it accepts is one Link Existing accepts, and the wiki
describes the button.
git's refusal quotes the destination, so a folder named openssl or rustls
classified as HOST_UNREACHABLE and the cleanup emptied it. The cleanup now
tests git's own text, DESTINATION_EXISTS is matched first, and ssl/tls are
matched as words. Also: a test for the Docker refusal on the default branch,
the route JSDoc and constant comment, and the folder copy (empty, or new).
The name rule now matches safePathSchema (letters, digits, space and _ - . ~,
no .., no leading dot, at most 255 bytes) so every folder it makes can be
linked. A file as the parent is a 400, errno text is no longer returned,
showHidden is forwarded like browse, and Create is disabled while the request
runs. Adds multi-user scoping tests.
A direct clone whose git-slot wait timed out came back with no spawnError, so
the cleanup emptied a folder git never touched. GitRun now says whether git
started and the cleanup requires it. Cloning into a folder at or inside a
Docker case workspace is refused, as git status, fetch and worktrees do, since
git would run the new repository's hooks and filters on the host.
The picker could only choose an existing folder. POST /api/filesystem/mkdir
creates one folder inside a folder the picker may browse (same roots,
ownership and blocked-tree rules as browse), and PathPicker gains an opt-in
allowNewFolder that adds a New folder button and selects the result.
A direct clone into an empty folder emptied the folder after any failure, which
deleted a concurrent attempt's finished clone when git had written nothing.
Clones into one folder are now mutually exclusive in-process, the cleanup is
skipped when git refused the folder, never ran, or the mount is unresponsive,
and a name linked while the clone ran is a 409 that keeps the folder.
Documents path for POST /api/cases/clone.
The custom folder was treated as a parent, so the repository landed in <folder>/<case name>. The chosen folder is now the clone destination: an empty existing folder is cloned into directly (CloneOptions.intoEmptyDir, no temporary sibling, never removed on failure), a new folder is created, and a folder with files is refused.
Clone Repo could only clone under ~/codeman-cases. POST /api/cases/clone now takes an optional path (parent folder plus case name) and the Clone tab gets a Clone into a custom folder option with a Browse button, mirroring Create in a custom folder. The path is judged by prepareNewCasePath, the clone is registered as a linked case, the option is admin-only in multi-user mode, and an existing target folder is refused.
An unset user option makes `show-options -gv` exit 1 on newer tmux but print nothing and exit 0 on 3.2a (Ubuntu 22.04), so the disarm assertion failed there although the option was gone. Assert on the global listing instead, which omits an unset option on both.
`all` also sped up Run's mode colours, Stop's confirming state and the armed Ctrl key. The browser test now reads the transition at rest, since its 250ms hold would also pass the old 0.2s one.
Root without CAP_CHOWN (--cap-drop ALL, as Codeman's own Docker case containers run) or a single-uid user namespace makes chownSync throw, which failed all five smoke tests in harness setup instead of master's two.
Consolidate this release's notes into one changeset (Thanks, the tab
strip, the fixes, the fixes applied while landing) and drop #730's own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#726 attaches the keyCode 229 recovery only when (pointer: coarse)
matches, which keeps a desktop dead key from arriving twice. Chromium
reports the PRIMARY pointer as fine once a mouse, a trackpad cover or a
stylus is attached, so on such an Android device the module was off
while the text still came from the soft keyboard, and the #441 dropped
last character and the #541 autocorrect duplication came back.
The gate is now a coarse pointer OR an Android user agent. Android ran
the recovery unconditionally before #726, so this only keeps that; a
desktop (fine pointer, not Android) and a touchscreen laptop stay off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
setRemoteWorkingDir() records the path for authority only, and today
nothing else reads it for a remote session (loadFixPlanFromDisk's only
callers are setWorkingDir and the local watcher). The watcher now
remembers the remote mode and refuses both the local read and the local
watch for it, so a future caller cannot import a same-named local twin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ctrl+V's hand-built bracketed paste (#726) and the phone composer's
dropped CSI 200~/201~ markers from the text in ONE pass, so a clipboard
carrying ESC[20 ESC[201~ 1~ came out of it with an ESC[201~ that ended
the frame early: everything after it was typed as keys and each CR ran.
Both now strip until nothing matches. The composer's copy predates this
release; it is the same one-liner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#722 stopped handing a remote session's workingDir to the Ralph tracker,
which also left isFileAuthoritative false for remote sessions only. That
flag is what keeps the output-based completion guessers off, and it is
true for every local session with a working directory, so a remote loop
could end, and mark every todo done, on a prose line such as "All tasks
completed" while a local one cannot.
setRemoteWorkingDir() records the path without reading or watching the
local disk, so the fix plan stays authoritative as for a local session;
the file still reaches the tracker only through fix-plan/read, over ssh.
The test pins both, and fails on the previous head.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Codeman maintainer