The scheduler is the part that runs with nobody watching, so it is decided per folder
rather than per session: sessions sharing a folder are the same clone and share one run
that both see, `inFlight`/`lastRunAt` are keyed by the resolved folder, the schedule is
stamped when a folder is picked instead of when its run starts, and a tick is skipped
while the previous one is still going. The click route joins a run already going for the
same folder rather than starting a second fetch in one clone.
The tick keeps ONE bound for the git processes of the whole run and hands it to every
folder, and bounds its folders with a bound of its own: the same semaphore cannot serve
both levels, because a folder holding a slot would then wait for a slot its own fetch
needs. Both bounds are `FETCH_CONCURRENCY`, so the ceiling is unchanged. The bound claim
in CLAUDE.md, the `Limiter` jsdoc and docs/api-reference.md now describes it as it is.
Before anything is fetched the folder is probed with the bounded path probe, so a case on
a mount that stopped answering is skipped and never touched.
The rest of the review: the hooks are named as they really are (`reference-transaction`,
`pre-auto-gc` through the maintenance a fetch triggers, config commands such as
`credential.helper`) and `FETCH_CONFIG_ARGS` turns maintenance and gc off for an
unattended run; the claim that an agent in the same repository is not disturbed is
replaced by the ref-lock collision it actually is; the click route publishes its own run
as `trigger: 'click'`; `autoSaveGitFetch` uses `_apiJson` so a 400 shows the error toast
and applies the returned settings; and the two wording fixes.
Tests: the scheduler pins one run per folder, the two bounds, the probe before anything
runs, and that closing the session holding the override keeps the folder while another
session is still open on it; the route test pins the click publish and the join, asserting
the join before the held run is released — releasing first lets the run finish and clears
the lane, so the joiner would be entitled to its own fetch and the test would pass for the
wrong reason.
Fetch is the only git command Codeman runs that writes, and the only one that runs a
repository's own fetch-post hook, so it stays behind a click and off by default. The Git
status window's header row gains Fetch; App Settings -> Bottom bar gains the switch and
the interval, synced because the scheduler acts on them, and Session Options -> Git
overrides both per case. The scheduler reads settings fresh each tick, times the interval
from the start of a run, never overlaps runs, and re-checks the Docker and remote rules
every tick before any git runs. Nothing but remote-tracking refs moves: HEAD, the index
and the working tree are proven unchanged against real git while origin/main advances.
Tests: src/git-fetch.ts and the scheduler, the per-case settings route, the synced/display
setting split, the two new i18n rows, and the Fetch block of the Git status browser suite.
The new-session row's agents now go through _runModeAvailableForCase (session-ui.js), the rule extracted from _refreshRunModeAvailability, for the case the row launches in: a Docker case offers what its container has (live probe, else availableModes, else ungated), so a container-only Run mode is offered and is the row's default again.
The default is resolved per render (pick, else the Run button's mode, else the first offered), so a query that moves the row to another case starts on the Run mode when that case offers it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude history merges, never overwriting, into a project directory a deleted case of the new name left behind, instead of staying orphaned under the old key.
The free-target pre-check also refuses a dangling symlink (lstat), so stopSessions no longer ends sessions before a 409 EXISTS.
The rename dialog says stopped sessions are closed (their tabs go away) and, after a failed rename, how many were already closed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict in CLAUDE.md's State Files line resolved by keeping #661's new
config-backup entries and this PR's "case default groups" in state.json.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Squash of PR #658. Discovery records each llama.cpp model's parallel slot
count (from --parallel/-np, or /props total_slots when the launch command
states none), and a Claude launch warns when the context split across
those slots leaves less than 40K tokens per request. An explicit
--parallel beside a /props context records a slot count of 1, so a later
round overwrites an earlier count, and a non-2xx /props is remembered per
launch command while a network error is retried.
Merge-time fix by the maintainer: the architecture-invariants sentence on
the explicit --parallel case now says it records a slot count of 1.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Merge-time fix for #676 (review nit 6). Once a Case settings popover had been
opened, every adopted tab layout (each create, delete and reorder) replaced
both selects' options, even with the popover hidden and the group list
unchanged, so a session created elsewhere could reset a native dropdown the
user had open. _refreshCaseDefaultGroupOptions now returns early when the ids
and names are the same. A vm case pins it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Case settings gains a "Default session group" selector (Ungrouped plus every
named tab group of the owner). A new session of the case lands in that group
in the same versioned layout write that registers it, so it is drawn in place
with no Ungrouped-to-group jump.
- Stored per owner and case in state.json (caseDefaultGroups), as the group's
stable id or null for Ungrouped; read and written only through
TabLayoutService under the owner lock.
- Precedence in sessionCreated: explicit tabGroupId, then the parent
placement, then the case default, else Ungrouped. A deleted or foreign id
never fails a spawn and is forgotten only after the creating write lands.
- POST /api/quick-start (local, linked, remote, Docker) and
/api/ralph-loop/start pass their case; POST /api/sessions infers it
lexically from workingDir. The create response carries tabLayout when a
case default placed the session.
- GET/PUT /api/cases/:name/default-group; deleting a case (or an admin
deleting a user's case folder) forgets the value.
- The selector mirrors desktop and phone, reverts on a refused save, and is
redrawn from every adopted tab layout; zh-CN strings added.
Claude Code lets a subscription's one-hour prompt cache expire after an hour idle, and the first turn back re-writes the whole conversation at the cache-write rate; nearly every gap over an hour goes cold, while the saving is concentrated in gaps of one to four hours. Codeman now sends one short keep-alive turn five minutes before the expiry Claude Code reports on its statusline, so the next real prompt still reads the conversation from cache, and stops two hours (configurable) after the last real prompt.
Codeman owns the idle policy for these sessions, as agreed in Discussion #554: a launch with keep-warm on also carries idleCompaction: false in its one --settings JSON, so Claude Code's own idle compaction cannot replace the conversation with a summary a minute before the nudge. It is decided once per launch (keep-warm on, the statusLine exporter injected, Claude Code 2.1.290 or newer, an unknown version fails closed like --name), recorded on the mux record, and picked up by any relaunch; a launch with keep-warm off is byte-identical. A session switched on after launch is kept warm best-effort and the readout says so.
Every guard lives in one pure rulebook: the opt-in (an agent-spawned session does not inherit the app default), a launch that reports cache state, a warm 1h cache with enough tokens at stake and no compaction this gap, a live pane, no usage-limit pause, no respawn, Ralph, task or waiting agent, idle, no open dialog, an empty composer and no recent keystroke. The nudge is a submit and moves lastSubmitAt, which the response viewer's conversation correlation needs; the cap counts from its own persisted lastRealPromptAt instead. Read My Mind drops the exact nudge text, and the turn's stop hook and idle prompt open pre-acknowledged so nothing alerts. The last cache report and the clock survive a restart, so the timer re-arms.
Copilot (`copilot`, npm @github/copilot) as a stock CLI entry with the same launch options as the other agent CLIs: model (--model), resume (--resume), continue (--continue) and allow-all (--yolo, clamped off for non-granted multi-user owners). Adds a resolver and GET /api/copilot/status probe, the agent-image package, Run-menu/mobile/logo entries, skill docs and tests.
Two gaps in how a regular user's browser handled the admin-only settings
writes:
- The role comes from GET /api/me, which answers after page load, and on
a failed request admin-ui.js falls back to a single-user admin. A save
made then was sent, came back 403, and still said "Settings saved",
while the refused server-wide change stayed on the device. A 403
FORBIDDEN on a settings write now ends that save like a known
non-admin's: synced keys back to the server's value, the one admin-only
notice, and the page is read-only from then on (_noteSettingsWriteRefusal).
The display-key list moved into one method (_displaySettingKeySet), so
that split no longer depends on GET /api/settings having loaded.
- A regular user's run mode and respawn presets were skipped for the
server but overwritten by the server's on the next page load, while
"Saved preset" said otherwise. They are now kept as that user's own on
the device and put back over the server's after the settings load and
on codeman:me (_rememberOwnSetting, _applyOwnSettings).
Admins and single-user mode are unchanged.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With PUT /api/settings admin-only in multi-user mode, a non-admin's page must
not run into the 403. `_settingsReadOnly()` (settings-ui.js) reads the role
from window.__codemanUser; single-user mode and admins are unchanged.
For a non-admin, App Settings Save/Apply still saves the per-device keys to
localStorage exactly as before, but sends neither the settings PUT nor the
model-config PUT, and keeps every synced key at the server's value (the next
page load would put it back anyway). Only when the user really changed a
synced setting do they get one toast that server-wide settings can only be
changed by an admin; a form baseline taken at open keeps an untouched default
that no admin ever stored from reading as a change. The background writes
(run mode, respawn presets and their load-time migration, last used case,
case order, the tunnel toggles) are not sent, and a 403 FORBIDDEN on a tunnel
enable is no longer mistaken for the no-password prompt. zh-CN for both toasts.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
fix(deepseek): find pnpm when installing the terminal profile, and install it with dsh
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The DeepSeek install command asked npm for dsh and pnpm in one go. On a
machine that already has pnpm through corepack (`corepack enable` puts a
pnpm shim in node's own bin directory, which is npm's global bin for nvm
and Homebrew installs), `npm install -g pnpm` refuses to overwrite that
shim with EEXIST, and because both packages were in the same command the
whole install failed: dsh was not installed either. Measured with npm 10
against a scratch prefix holding a corepack-style shim. On master the same
machine installed dsh fine and the profile install used the existing pnpm.
The command is now `npm install -g @deepseek-ai/dsh && (command -v pnpm
>/dev/null || npm install -g pnpm)`, so pnpm is installed only when the
install environment has none, and a failed dsh install still fails the
command. The two hints that embed it follow (the launch-table drift test
requires that), and the catalogue is regenerated; install.sh withholds
the command for a launcher-only CLI, so its block is unchanged.
The test now runs the real stock string through /bin/sh with a fake npm
on a PATH it controls, for the three cases: no pnpm, an existing pnpm,
and a failing dsh install.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
When a managed worktree's folder is deleted by hand (a user in a file
manager, an agent's rm -rf), git keeps its record and lists it as
prunable. Codeman then had no way out: the dialog showed the row as
"missing" with no action, DELETE answered "No worktree named ...", and
the name could never be used again (the branch still existed, and with
another branch git refused "a missing but already registered
worktree"). Reproduced on git 2.43; git's own `git worktree remove` on
the missing path drops the record with exit 0.
Removal (only removal, never a session start) now accepts a worktree
whose folder is gone when git lists it at exactly the managed path, as
prunable or locked, and no component on the way is a symlink or a file.
The live-session and lock refusals still apply. The dialog offers
Remove... (not Open) on such a row, with a note saying what it does.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The worktree API needs a front door that works from the place cases are
already picked. The toolbar case picker gains a third action row,
"Git worktrees…" (the phone case sheet gets a Worktrees button next to
Create New Case; no header button anywhere), opening one dialog per case:
- the repository's worktrees, with the managed ones (.claude/worktrees)
offering Open (start another session in it) and Remove…, an inline
confirmation with "Also delete its branch" (git branch -d) whose git
refusal is shown verbatim through textContent;
- a New worktree form (name, optional branch and start point) and a
"Start sessions with" picker over every enabled, installed run mode,
built from the registry catalogue as data, never an id branch.
Launching goes through run() with options.worktree and the same temporary
_runMode swap the custom-model entries use, so every mode keeps its own
path: claude and shell create through POST /api/sessions with the
worktree as workingDir, every other CLI through quick-start's worktree
field. Tabs are named w<n>-<worktree> and the Run button's mode is left
as it was.
Close Session offers "Kill & remove worktree" for a session that runs in
a Codeman-managed worktree; the removal waits for the server to confirm
the session is gone (closeSession now resolves true/false), and a dirty
tree keeps the worktree with git's reason in a toast that opens the
dialog. zh-CN strings and toast patterns for all of it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The root CLAUDE.md had grown to 202 KB, all of it loaded into every
session. This lands the split drafted on 2026-10-10 (it sat uncommitted
in the shared checkout through two releases), redone on top of today's
master so nothing that landed since is lost:
- src/web/CLAUDE.md: the frontend invariants (every src/web/public/ UI
subsystem, the module notes, the XLSX preview limits, the z-index
stack). Claude Code loads it when a file under src/web/ is read; the
root file tells sessions to Read it before editing src/web/public/.
Its link targets are relative to the file so they resolve on GitHub.
- docs/releasing.md: the COM procedure (now nine steps, with the MCP
registry publish), behind a pointer in the root COM section. The
Version line stays in the root file.
- Root CLAUDE.md (130 KB): everything else, plus the split's trims: the
Core Files table, the reference-only rows of the Additional Commands
table, Data Flow and the respawn presets, whose rules already live in
the root's other paragraphs (the "Read before touching a subsystem"
line keeps the table's doc pointers).
Every other paragraph of master's CLAUDE.md lands in exactly one of the
three files, checked line by line; the paragraphs master changed since
the draft (tile grid, OSC 52, prompt uploads, file-path links and the
HTML view, markdown preview, z-index, MCP server, agent CLI and others)
are in their current form. Both new files join CLAUDE.md in
.prettierignore. Four code comments and docs/architecture-invariants.md
now point at src/web/CLAUDE.md for the moved sections.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The row said the path is "on the machine hosting Codeman" for every session.
A remote SSH session's workingDir is the path on the remote host, and a
Docker session's CLI runs inside the container the host folder is mounted
into. openSessionOptions now sets the description from session.remote /
session.docker (the id it targets was added with the layout fix).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict resolved in docs/api-reference.md: #607's prompt cache section and
#528's tabGroupId section are both kept.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude Code's tracker nulls recache_tokens_if_cold at a compaction or a tool-result clearing and only counts the expected rebuild at the next request, which also closes the window, so no report carried both and the old rule never fired. Stamp on the first warm null report after one that carried a value, carry it through idle re-reports and drop it at the next request; the readout now says "Context compacted at HH:MM" since a clearing opens the same window.
Also persist a changed report so a crash restores the latest one, rename the session field to statusLineExporter (statusLineTelemetry is the registry capability) and document its values, word the stake as re-cached, move the readout block above the SSE staleness heading, and drop keep-warm mentions until it lands.
Claude Code's statusline has carried a prompt_cache object since v2.1.251, and Codeman's statusline exporter already received it, but StatusTelemetrySchema stripped the whole object, so Codeman never knew whether a session's conversation was still cached. Keep it and show it.
StatusTelemetrySchema now lists every documented scalar field null-tolerant (several are documented as possibly null, and the object gains fields across CLI versions, so a strict shape would 400 the post and blank the footer), while parsePromptCache normalizes only the subset Codeman stores, so a hostile localhost payload cannot bloat state. Session.promptCache rides toState with a change-only session:promptCache event, and the route broadcasts the stored object.
The Session Options (Respawn tab) readout shows warm-until or cold with the re-read stake, the cache hit rate, the last miss's causes, and, for Claude Code's own idle compaction (recache_tokens_if_cold null while expected_rebuilds rose), a "compacted at HH:MM" note that is never raised as an alert. setPromptCache stamps that on a new object rather than mutating the parsed report, so the stamp reaches the broadcast. Sessions without a statusline of their own also get a cache:until HH:MM / cache:cold group in the terminal footer. The last report is restored on a Codeman restart (like displayModel) so the readout is not blank until the pane's next render; the readout is time-aware, so a value whose expiry has passed reads as cold, not stale-warm. A launch without the exporter records why (collection off, workspace statusline, remote) so the row says the cause instead of "not reported yet" forever.
This is the sensor a later opt-in keep-warm would read, and the TTL it reports is the source of truth rather than the plan tier.
New sessions, spawned child sessions and saved web tabs now land in tab
groups instead of always starting in Ungrouped.
New session in a group:
- The group menu gains "New session" (first item). It expands a collapsed
group and runs ONE launch with the current case and run mode; a launch
already in flight is reported, not queued.
- run({ count, tabGroupId }) threads the group through every launch path
(local POST /api/sessions, remote/docker and external-CLI
/api/quick-start). The count overrides the steppers for that launch only.
- Server: POST /api/sessions and /api/quick-start accept an optional
tabGroupId (Zod, 1-100 chars; null/empty is a 400). The routes pass it to
addSession(), and TabLayoutService.sessionCreated() places the session at
the end of that group in the SAME versioned write that first records it.
The session is added to the live map inside the owner lock (with a
rollback when the write fails), so no queued layout edit can commit it
first. The group is looked up in the creating owner's own layout, so an
unknown, deleted or foreign id is ignored instead of failing the spawn. An
explicit group is a hand placement: a child placed this way is manual.
- The create response carries the committed tabLayout (only when tabGroupId
was sent), adopted before the new tab is drawn. Responses without the
field are unchanged.
Child sessions (parentSessionId / X-Codeman-Parent-Session):
- A child nobody placed follows its parent: the server's existing
normalization already puts it after the parent's rows; the browser now
draws a not-yet-stored child there too (project({ parents })) and, while
groups exist, adopts the server's order instead of echoing its own append
back through PUT /api/session-order (which pinned every child manual).
- The row menu says where a child sits (follows, placed by hand, parent
closed, parent loop) and offers "Follow parent again" only to a hand-placed
child. A child whose parent is gone stands on its own and is never
re-adopted.
Saved web tabs:
- Web tabs are layout refs like sessions; openness stays per device. A
grouped web tab shows (and takes an Alt+N slot) only while open here and
reopens where the layout keeps it. Pinned by tests; no behaviour change.
Unchanged: the flat rail and header strip (markup, HTML5 drag, append and
save on create), the tree semantics and single tab stop, sessionOrder and
Alt+N, and every request that does not send tabGroupId.
The owner asked to drop the "+" (Add Case) and gear (case settings) buttons
beside the toolbar case picker. Their two actions now close the picker's own
list instead, as "New or link a case…" and "Case settings…" rows in a sticky
footer, so nothing becomes unreachable: on desktop the "+" was the only door to
Add Case (create, link, clone, manage), and the gear the only one to the
per-case Agent Teams / 1M Opus overrides.
The rows are part of the arrow-key walk (after the last case) and Enter runs
them, they also show when nothing matches the filter, and the case settings
popover still opens anchored to the case group. The picker input gets its
right-hand corners back, and the dead .btn-case-add / .btn-case-settings rules
(desktop, phone and two skin selector lists) are gone. Phones keep their own
case sheet and gear.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Only the stepper half of #428 lands here. Its other half, the phone case
picker search, shipped separately in #488 (1.33.1) and is kept as it is on
master, so every file of this merge starts from ours and only the stepper
changes are ported onto it:
- index.html: the second `− 1 +` group (#shellCount) after Run Shell is gone.
- session-ui.js: incrementShellCount/decrementShellCount are removed and
runShell() reads the toolbar's one stepper through _readTabCount(), the
helper master grew since #428 was opened (same clamp and absent-element
fallback as #428's _toolbarInstanceCount()).
- run-mode-ui tests stub #tabCount instead of #shellCount, plus #428's
"toolbar instance count" block adapted to _readTabCount() and a markup check.
- wiki: "the instance counter", singular.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Since the CLI registry gave claude kind 'agent' (#476), isExternalCliRunMode() reads claude as an external CLI, so Session Options opened every Claude session on Summary and hid the Respawn and Ralph tabs and every Claude-only control (auto-resume, the respawn loop). The browser catalog now carries the registry's capabilities.external, the flag the server's isExternalCliMode() already reads, and Session Options asks that instead. run() keeps isExternalCliRunMode(): choosing a launch path is a different question, and custom agents rely on it.
Every Run path makes each session it created visible through
_ensureCreatedSessionVisible and then selects the first one, a human
selection that used to leave the grid for the single view. That helper now
hands the new session to _joinTileGridFromRun: with the grid open it joins the
next free slot, so Run's selection focuses its tile. No Attach overlay flashes
on it while Run starts its pane. Sessions created elsewhere (agents, other
devices, cron) arrive only by session:created and never join; a grid already
holding what the window fits does not take it, and a hint says the new
session opens on its own.
A tile's + adds "New session in this case": the normal Run (current run mode)
for the case the tile's session belongs to, with the toolbar's case put back
afterwards; the session it creates joins the grid like any Run from this tab.
Disabled for a session outside every case.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Route test hygiene: each test works in its own mkdtemp folder, every
deletion goes through safeRmHomeTree, and the suite refuses to start
outside test/setup.ts's temp HOME, so a raw `npx vitest` can no longer
delete a real ~/projects or the live linked-cases registry.
- Path policy: the symlink-resolved target is also judged against the
resolved home, data dir and system roots (home reached through a link,
macOS /etc -> /private/etc); test expectations are realpath-safe.
- Refuse a target equal to or inside the caller's or the shared cases
directory, pointing at plain Create New (it would list twice, and
deleting the local copy removes files).
- The registry re-read comment no longer claims to prevent the
lost-update race; documented as narrowing it, like /api/cases/link.
- UI: the success toast names the folder the server created, the
"under ~/codeman-cases" blurb and name hint change while a custom
folder is ticked, a "/" parent previews and sends /<name> instead of
an empty path, and the new labels have zh-CN entries.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
fix(cases): bound path probes for linked workspaces and session creation, so an unreachable mount cannot freeze the server
# Conflicts:
# src/web/routes/case-routes.ts
Reopening the editor over a rename still in flight filled it from the name
the server had not replaced yet, so dismissing it (blur commits) queued the
old name behind the new one and undid the rename. The queue now records the
newest queued name per session (_inlineRenamePending, cleared with the queue
entry), and a reopened editor takes its prefix, input and "unchanged"
comparison from it. An untouched confirm sends nothing more.
A failed write only toasted while its editor was still current. The queue
reports the failure itself now, and the editor only puts its label back.
One rejected task blocked every later rename of that session until reload.
Each task now chains from a settled predecessor, the local apply after a
successful PUT is guarded, and the queue entry is cleaned up on either
outcome.
The rail and sidebar editor's 4rem floor moves from a stylesheet
`!important` into the inline min-width startInlineRename already writes per
layout (0 in the header strip, 4rem in the rail and sidebar).
Tests: the reopened-editor case now expects only "First" to be sent; new
cases cover a 500 answered after the editor is gone and a throw in
updateSubagentParentNames; the long-prefix check runs in the sidebar and
detailed sidebar too and asserts the inline floor; the header strip editor
keeps min-width 0.
Two problems with renaming a tab in the vertical rail, both easier to hit now
that the grouped rail has its own inline editor beside the session one.
Writes. A committed rename PUT its name and only applied the answer if the
same editor was still open when it came back. Reopening the editor before the
PUT answered (F2 or right-click again, or starting a group rename, which
cancels the session editor) threw the confirmed name away, so the tab kept
showing the old name until an SSE frame happened to repaint it. Two quick
renames also raced as two concurrent PUTs. Inline renames now go through a
per-session queue: one PUT at a time in the order they were made, the
confirmed name applied to app.sessions whatever happened to the editor, and
the "already that name" check made when the write runs rather than when Enter
is pressed, so confirming the name still on screen over a write in flight is
a real write.
Layout. The editor (a flex row) could not shrink below the input's intrinsic
width, so a long w<n>-<case> prefix pushed the label past its row: the prefix
slid out of view in the detailed rows and the input was clipped mid-word in
the compact rail. The label now has min-width 0, the prefix gives way first
(down to 2rem, with an ellipsis), the input keeps 4rem, and in the compact
rail the row's adornments step aside while the name is edited. The detailed
rows' three-line clamp also outranked the shared unclamp rule, which is what
the existing "unclamped editor" browser test caught; it is restated there.
Header strip, sidebar and flat-rail markup are unchanged.
Tests (test/inline-rename.test.ts, browser suite): the unclamp check runs for
simple and detailed rows; a write-ordering describe covers ordering, a
reopened editor cancelled over a confirmed write, a re-sent unchanged name and
a group rename taking over; a long-prefix describe drives real rows from a
live session in simple, detailed and compact rails.
The bounded path probe answered "absent" both when a path did not exist and
when it simply did not answer, so a stalled linked case 404'd and the Run
button scaffolded a stray local case over it, and two stalled paths anywhere
made every unrelated path read as absent (hooks skipped, statusLine
overridden, the clone warning lost).
- probePath()/probePathKind() are tri-state: present (or directory/file),
absent (ENOENT/ENOTDIR only) and unknown (timeout, other errors, refusal).
boundedPathExists() stays as the display-only boolean.
- A stalled path takes only its own mount out of probing (deepest mount
point from /proc/self/mounts, never /; just the path itself when there is
no mount table). Unrelated paths keep probing. The process-wide cap is a
backstop that answers unknown, and a single-path user request can probe
past it ({ pastCap: true }), still bounded and still recorded as stalled.
One console.warn when a path first stalls and one when the cap engages.
- GET /api/cases/:name keeps NOT_FOUND for definite absence only. An
unreachable linked case answers with its registered path and
unreachable: true; a local one answers OPERATION_FAILED. runClaude and
runShell create a case only on errorCode NOT_FOUND. The case list keeps an
unreachable linked case, marked unreachable, instead of dropping it, and
fix-plan reports an unreadable plan as an error, not "no plan".
- applyWorkspaceHooks and the statusLine helpers skip only a workspace that
is absent or on the stalled mount; a capacity refusal no longer stops
hooks being installed elsewhere, and an unreadable settings file never
lets the exporter override a user's own statusLine.
- The clone flow's repo-settings warning is back on its synchronous check,
and stripCaseEnvKeys uses pathExistsForWrite.
- POST /api/sessions (workingDir) and POST /api/quick-start (case folder)
probe with the bounded probe instead of statSync/existsSync. Missing and
non-directory keep INVALID_INPUT; unknown is OPERATION_FAILED, and
quick-start never scaffolds over a folder that did not answer.
- PATH_PROBE_TIMEOUT_MS and MAX_STALLED_PATH_PROBES move to
src/config/path-probe.ts, overridable via CODEMAN_PATH_PROBE_TIMEOUT_MS
(default 1500) and CODEMAN_PATH_PROBE_MAX_STALLED (default 3), and are
documented in the Settings Reference.
- The probe is exported from the utils barrel and imported from there.
POST /api/cases takes an optional path; Add Case > Create New gets a 'Create in a
custom folder' option with Browse. The folder is created (or an empty one filled),
scaffolded like a normal case and registered as a linked case. System, home,
credential and Codeman folders are refused; a folder with files is Link Existing's
job; a failure after the first write undoes what this call created. Admin only in
multi-user mode, like Link Existing.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude Code's advisor tool (code.claude.com/docs/en/advisor) lets the session's
main model consult a second, stronger model at decision points: before
committing to an approach, on a recurring error, and before declaring a task
done. Codeman can now start claude sessions with one.
- `advisorModel` field on POST /api/sessions, /api/quick-start and
/api/ralph-loop/start (fable, opus, sonnet or a full model id in those
families; haiku cannot advise and is refused). Stored on the session and
persisted, so respawn, boot restore and reboot restore keep it. Remote and
docker quick-starts refuse it, as they refuse effort.
- App Settings, Models, "Advisor" segment (Default / Sonnet / Opus / Fable),
synced as `claudeAdvisorModel`. Run, resume and the Ralph wizard send it.
Default sends nothing, leaving the CLI's own /advisor choice in charge.
- Carried as the `advisorModel` key in the launch's single --settings JSON,
merged with ultracode and the statusLine exporter, never the --advisor
flag: `claude --advisor haiku` exits 1 at launch, which would leave a dead
pane on every respawn, while the settings key degrades to no advisor. A
launch without an advisor is byte-identical to before.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The phone case picker had no way to narrow a long case list, so finding
one meant scrolling a sheet that showed about six rows at a time.
- A search field filters rows by name (every typed word must match, any
order, case-insensitive), with a "No matching cases" state. Enter picks
the case when exactly one row is left; Escape clears, then closes.
- The field is not auto-focused, so opening the picker does not raise the
keyboard. The list holds its unfiltered height while searching so the
sheet does not jump, and the input is 16px so iOS Safari does not zoom.
- Layout: the sheet padded the home-indicator inset on top of the footer
already doing so, leaving a dead band under Create New Case; the sheet
now grows to 80dvh and the list fills it instead of a separate 50vh cap.
- Opening scrolls the list (its own box, not scrollIntoView) to the
currently selected case.
Co-authored-by: Codeman maintainer <noreply@anthropic.com>
The Run bar's case picker only loaded /api/cases at page load, so folders
deleted or created on disk stayed listed until a reload. It now refetches
on open and every 5 seconds while open, repainting only when the list
changed and falling back to another case if the selected one was removed.
The Manage tab of Add Case gains a search box filtering by name or path.
Reorder arrows are disabled while a filter is active so a swap cannot
involve a hidden case.
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
* feat(cli-registry): add cliManagementEnabled flag and GET /api/clis
Phases 1-2 of docs/cli-enable-disable-plan.md ("PR C" from the #343
review): a synced, default-OFF master flag gating the upcoming CLI
management surface, plus a read-only GET /api/clis endpoint listing
every registry entry (stock + custom, enabled or not) for the
Settings UI. Non-admins in multi-user mode see an empty list rather
than a 403. Write endpoints, auto-install, custom entry CRUD and the
Settings UI list itself land in later phases.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* feat(cli-registry): Phases 3-6 - write API + custom entries + Settings UI
Completes docs/cli-enable-disable-plan.md ("PR C" from the #343 review).
Phase 3: PUT /api/clis/:id toggles enabled for any EXISTING entry (stock or
custom) via a shallow merge onto its clis.json override; shell/claude are
structurally un-disableable (Decision 4), an unknown id 404s rather than
becoming a creation backdoor.
Phase 4: POST /api/clis/:id/install runs a STOCK entry's already-vetted
install command (shell:true, bounded by timeout, process-group killed on
expiry, output captured, audit-logged). A custom entry's id is refused
outright, independent of anything Phase 5 does (Decision 3: a custom
entry's install text is display-only, never executed).
Phase 5: POST /api/clis (create) / PUT /api/clis/custom/:id (update) /
DELETE /api/clis/:id (custom only) — a deliberately minimal request shape
(id/label/shortBadge/binaries/a simple launch variant), assembled into a
full CliEntry with conservative capability defaults and re-validated
through CliEntrySchema before writing, never a relaxed path for
UI-originated entries. Stock-id collisions, duplicate custom ids, and
edits/deletes against a stock id are all rejected explicitly.
Phase 6: the Settings UI section (App Settings -> Agents & CLIs), gated
independently on cliManagementEnabled AND admin-in-multi-user-mode
(Decision 5), fetching/rendering GET /api/clis and wiring every write
endpoint above.
Every write endpoint answers the same way when the feature is off: 403
FORBIDDEN via one shared requireCliManagementGate() (Phase 1's own
checklist item). registry-writer.ts is a new, deliberately separate write
module so registry.ts itself stays import-side-effect-free, same tmp+
rename+0600 shape as custom-model-hosts.ts.
27 new/updated route tests covering every gate, collision, and cleanup
path; full CI gate green (415/416 files, 7854 tests).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): toggling a CLI off in Settings never hid it anywhere else
window.__codemanCliAvailable — the flag isCliAvailable() reads client-side
to gate the welcome-screen buttons, the Run-menu dropdown and the mobile
overview — was built purely from each CLI's own installed-on-PATH resolver
(isClaudeAvailable() etc.), with no reference to the registry's `enabled`
flag at all. So disabling a CLI via the new Settings UI (or a hand-edited
clis.json) updated the settings row and nothing else: every launch surface
kept offering it, both live and after a full page reload, since even a
fresh render never consulted the registry.
Fixed in two places:
- server.ts: after building `available`, intersect the nine real
SessionMode ids against `enabledClis()`. git/cloudflared (utility
binaries, not CLI registry entries) and deepseekBinary (a secondary
installed-only flag for the "add a profile" affordance) are deliberately
left alone.
- settings-ui.js: `toggleCliEnabled()` now patches
`window.__codemanCliAvailable` in place and refreshes the welcome screen,
the mobile overview and an already-open Run menu, mirroring the existing
`installDeepSeekProfile()` pattern for the same "injected once, needs an
explicit patch" reason — without this half, the server-side fix alone
still left every surface stale until the next reload.
New test in test/render-index-html.test.ts: an installed-but-disabled CLI
(codex, forced via clis.json + reloadCliRegistry()) reads as unavailable,
while an installed-and-enabled one (claude) is unaffected by the override.
Verified on the Debian devbox (codeman-devbox, real tmux — this sandbox has
none and WebServer's constructor hard-requires it): typecheck clean, the
new test passes (17/17 in render-index-html.test.ts), the CLI-registry
suites pass (86/86), and the full CI gate is green (415 test files, 7855
tests, 0 failures).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* docs(cli-registry): update the CLI-management plan with status, gotchas, and the Run-menu gap
Phases 1-6 were implemented across two commits (da07b38c, db4557d9) with no
corresponding update to the plan doc itself — every checklist still read
Status: TODO and every box unchecked. Brings the doc in line with the tree:
- A new "Status as of 2026-09-22" section up top: what's actually
implemented (verified by grepping the routes/schema/UI, not just trusting
the commit messages), the availability-flag staleness bug found and fixed
in this session (commit 0c77dd0a) with its devbox verification record, and
one real outstanding gap.
- The outstanding gap: a custom CLI created via Phase 5's write API has no
way to actually be launched. The Run menu is static per-mode markup with
no consumer of window.__codemanCliCatalog, so Phase 6's own "create a
custom entry, confirm it can be launched" verify step was never actually
exercised against this. Documented with two candidate fixes, neither
started.
- Each phase's checklist flipped to [x] where confirmed present in the tree,
Status lines updated from TODO to DONE, and the two originally-open
questions (Phase 2's installed source, Phase 5's PUT endpoint shape)
marked resolved against what actually shipped.
No code changes in this commit — documentation only, so a future session
(or the one already mid-flight on a separate checkout of this same branch)
picks up accurate status instead of a stale plan.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* docs: add the CLI-registry deployment plan and the parked Copilot plan
Both were sitting as untracked scratch files in the master checkout,
never committed to any branch. Moving them here rather than leaving them
loose:
- DEPLOYMENT_PLAN.md is the live tracker for the CLI-registry follow-up
series (PR A #347 merged, PR B #380 merged, PR B2 merged as #458) and
is where PR C (this branch's own CLI-management work) belongs.
- docs/copilot-integration-plan.md is explicitly PARKED, referenced by
name in docs/cli-enable-disable-plan.md's own header as a sibling plan
tracked separately — kept for continuity, not active on this branch.
The other scratch files found alongside these (PRA.md, PRB.md, PR-B2.md
and their review-response counterparts) described PR A/B/B2, all now
merged — deleted from the master checkout as stale rather than committed
anywhere, since their content is superseded by the real merged PRs.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* fix(cli-registry): render enabled CLIs in launch surfaces
* test(cli-registry): update frontend branch guard
* fix(test): isolate suite from deployment environment
* fix(cli-registry): revise Decision 4 - claude is toggleable, shell stays permanent
shell/claude were both structurally un-disableable in the original plan
(Decision 4). Revised: shell keeps the hard backend guarantee (it is the
one non-agent mode several code paths assume always exists as a raw-
terminal fallback), but claude is now a normal toggleable entry like any
other CLI.
Safe to do because internal session creation (tmux-manager.ts, session.ts,
Ralph, plan-orchestrator) resolves a CLI via getCli(), which does not
check `enabled` at all - only the Run menu and the HTTP-facing
sessionModeSchema() (new session requests through the normal API) key off
it. Disabling claude therefore behaves identically in kind to disabling
any other CLI: no internal fallback path breaks, it just stops being
offered for new sessions until re-enabled.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): hide shell's toggle entirely instead of greying it out
A permanently-disabled switch next to every other row's working toggle
read as broken rather than intentional. shell now renders no switch at
all - a plain "Always available" label - so there is nothing to click
that could look like it should work but doesn't. Backend guard is
unchanged (UNDISABLEABLE_IDS still refuses shell unconditionally); this
is UI-only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): sort the Installed CLIs list, installed-first then alphabetical
renderCliList() previously rendered in registry order (each entry's fixed
order field). Now sorts installed CLIs first, then not-installed, each
group alphabetical by label - matches how a user actually scans the list
(what's ready to use, then what needs installing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* style: prettier fixes from the master merge
* fix(cli-registry): install/edit take effect immediately, confirm before install, phone labels
Four gaps found verifying #476 against the #343 review trail:
- Installed or edited CLIs kept reading as missing/stale. Every binary lookup
(the nine per-CLI resolvers and the generic registry one) caches in its own
closure, with a negative-cache backoff of up to 5 minutes, and nothing
cleared them. invalidateCliExecutableResolvers(binaries) now drops those
caches per binary; install (success or failure), create, edit and delete
call it plus invalidateCliResolverCache(id). Before this, a CLI installed
from Settings could fail to launch for minutes, and an edited custom entry
kept launching its old binary until a restart.
- The Settings "installed" badge for a custom entry used a private `which`,
ignoring the entry's searchDirs and the login-shell lookup that spawn and
the Run menu use; it now asks the same generic resolver they do.
- Install ran on a single click. The #343 review asked for auto-install to
sit behind an explicit confirm; the confirm now names the exact command,
which GET /api/clis returns for stock entries only (installCommand).
- The phone Run button showed the two-letter tab badge ("CC", "CX") instead
of the word ("Claude", "Codex"). It uses the registry label again, which is
identical to the old static table for every stock CLI (now pinned).
14 new tests; 9 of them fail against the previous head and pass here.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): address #476 review — safe serialized writes, no id branches, docs
Must-fix:
- registry-writer: start fresh only on ENOENT; refuse (409) a clis.json that
does not parse or has group/world permission bits instead of overwriting it
(isUnsafePermissions now exported from registry.ts)
- mutateRegistryFile(): one promise chain for every mutation, with the
existence/duplicate checks inside the serialized step, plus a unique tmp
name per write
- docs: CLAUDE.md, architecture-invariants, cli-registry (new Settings
section) and api-reference (the six /api/clis routes)
- drop DEPLOYMENT_PLAN.md and docs/copilot-integration-plan.md
Smaller:
- PUT /api/clis/custom/:id keeps the entry's current enabled state when the
body omits it
- runMode setter falls back to the first enabled catalogue entry, not 'claude'
- shell guard keyed on kind === 'shell' (routes + Settings list); stock probe
map shared with server.ts via utils/cli-installed-probes.ts
- stock claude label is now 'Claude Code', so the Run menu / phone overview
label rewrites are gone (doctor row keeps "Claude CLI" via its override)
- welcome buttons are translatable again and read "Run Claude Code" /
"Run Shell"; zh-CN gains "Run Codex" / "Run OMP"
- install: per-id in-flight guard (409) and CODEMAN_* stripped from its env
- fileoverview / CliEnableSchema comments no longer say stock-only
- test-env isolation changes moved to their own PR
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* test(cli-registry): pin the #343/#347 findings #476 makes reachable
A CLI toggled or created through the routes is accepted or rejected by
CreateSessionSchema with no restart (#343 finding 2), and a custom CLI created
through the API renders a real local, remote and docker launch command
(#347 finding 5: no more `cd <path> && undefined`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
- test/opencode-resize.test.ts: retarget the launcher guard at the real code (this.selectSession(firstSessionId), any this.activeSessionId assignment) with an anti-vacuity check; the old strings existed nowhere, so it could never fail
- session-ui.js: restore as comments the two invariants the merged bodies lost (deepseek leaves statusReporting unset, i.e. ON; no effort field for external CLIs, it is Claude-specific)
- docs/cli-registry.md: move the frontend-guard paragraph below the two backend-guard paragraphs so they keep their antecedent, and note the widened comparison shape
- test/frontend-cli-no-id-branching.test.ts: the comparison shape accepts any left-hand identifier (const m = this._runMode; m === 'codex' was invisible), normalized to `mode`; the two `m !== 'shell'` display filters are allowlisted and the remaining blind spots documented
- test/run-mode-dispatch.test.ts: table-driven pin of run() dispatch (claude to runClaude, each RUN_MODE_LAUNCH id to _runCliMode(id), shell to runShell, unknown to runClaude, lock held and released)
- CLAUDE.md: name the second CI-gated guard next to the backend one
- server.ts: every </head> injection passes a replacer function; a clis.json label containing $' re-injected the rest of the document past escapeScriptJson (two render tests pin it, proven failing on the string form)
- _isAltCliMode(): no reference anywhere in the tree, nothing to fix
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
(cherry picked from commit 1ea363ff808a62861559bc141e724b163cc1c56e)
The maintainer's promised follow-ups to opticon454's picker promotion,
applied on the landing branch after the merge (ecb95b5d):
- session-ui.js: the promotion tag ("Currently loaded" / "Last used") and
the "Default" pill are two separate spans, so a promoted row that is
also the endpoint's defaultModelId shows both instead of silently
losing its Default marking; two tests pin it (both fail on the old
exclusive-slot rendering).
- styles.css: a dedicated #customModelPickModal .set-scope rule, since
the pill was only styled inside the three settings modals and rendered
as plain body text here; same skin tokens, modal layout untouched.
- docs/wiki/Custom-Model-Endpoints.md: describe the promotion (currently
loaded, else last used per device), the separate Default pill, and
that nothing is ever auto-chosen.
- CLAUDE.md + docs/custom-model-endpoints.md: credit the real "Last used"
writers (_runCustomModelEntryViaRestart and
_quickStartWithCustomModelConfirm; runCustomModelEntry only dispatches
since 88e5b7b2) and drop the now-wrong "both defer to Default" sentence.
- Not done: moving the one-shot "last used" write into
_runCustomModelEntryOneShot, because the existing one-shot tests assert
that _quickStartWithCustomModelConfirm writes the key itself.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
(cherry picked from commit 0cb0f911adc14a852ba5c2951768a4aa87c25657)
Four things from the maintainer's review on PR #459, all fixed:
1. Bound _getCustomModelCurrentlyLoaded's probe client-side (~800ms via
Promise.race, on top of — never instead of — the route's own 5s
server-side timeout). Without it, an asleep/firewalled endpoint behind
a saved model list left the picker completely invisible for up to 5s
after the Run menu had already closed, with no spinner or toast.
`timeoutMs` is an optional param (default 800, real callers never pass
it) so a test can drive it in milliseconds, same pattern as
`_watchLlamaSwapLoading`'s own `pollIntervalMs` — this code runs in a
JSDOM window's own realm, whose setTimeout vi.useFakeTimers() cannot
patch.
2. "Last used" is now written only once a launch actually applies, never
on the mere click. It moved out of runCustomModelEntry (unconditional)
and into each path's own success point: _quickStartWithCustomModelConfirm
after the final post succeeds, and _runCustomModelEntryViaRestart right
after the apply's success check. A context-window-warning decline means
this exact model cannot work with this CLI at all, so the old
unconditional write would promote, next time the picker opened, the one
model guaranteed to fail again.
3. Documented the promotion/tag precedence and the new
codeman:customModelLastUsed:<mode>:<endpointId> localStorage key in both
CLAUDE.md's Custom Model Endpoint Profiles section and
docs/custom-model-endpoints.md's Run-menu picker section.
4. Added zh-CN entries for "Currently loaded" and "Last used" in i18n.js,
next to this modal's existing "Choose a model"/"Custom Endpoints" pair.
New tests: the client-side timeout (endpoint that never answers, one that
answers within the bound, and a rejected-after-timeout probe settling
quietly), and "last used" recording on success vs. NOT recording on either
confirmation's decline, for both the restart and one-shot paths.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD