- docs/api-reference.md and the voice-stream.ts overview now say a
transcript frame is the current utterance so far and a final frame
ends it, as the relay's own comment and the invariants doc do.
- VoiceInput.cleanup() hides the Send button before stop(true), so the
button stays up for the words stop(true) salvaged and inserted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
_onWebSpeechEnd counted every run that ended without a result toward the
two-retry cap, however long the run lasted. Under 30 s or Manual, each
no-speech window of the engine is one silent run, so the third ended the
recording at about 18 s of silence, before the deadline, and Manual
stopped on its own. Both recognition.start() sites now stamp the run start;
an empty run counts toward the cap only when it ended within a second of
starting (a recognizer that cannot listen), and any other run resets it.
The 250 ms backoff is unchanged.
The vm harness in test/voice-silence-timeout.test.ts now passes the test's
Date into the context, whose own Date ignores fake timers.
Also from review: the VoiceInput stubs of the four settings-ui.js tests
carry SILENCE_TIMEOUT_SECONDS; Settings-Reference lists Stop after silence;
the touchscreen Linux fallback leaves out ChromeOS and says a touch Linux
laptop still matches; the dead _webSpeechStream teardown is gone; the two
voice tests use vitest expect instead of node:assert.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The owner found the options confusing after the first test build. The
menu now reads Off / While Agents Work / Always, then on a MacBook
Only When Plugged In and With the Lid Closed…, then one status line.
- "Always While Codeman Is Open" is now "Always"; the status line says
"Awake: Codeman is open".
- "Only on Power Adapter" is now "Only When Plugged In".
- "Remove the Lid Helper…" is gone: the lid item is the helper.
Ticking it installs the helper behind the administrator prompt,
unticking it removes it behind another. The setting changes only
once the prompt's command ran, so a cancelled prompt leaves the item
as it was.
- Shorter status lines ("Awake: agents working, lid closed too",
"Paused: on battery", "Sleeps as usual: no agent working").
Config keys and values are unchanged, so a saved choice carries over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- sync-case-state browser and stale-refresh tests use lastPickedCase (the stale test now fails without its guard)
- saveLastUsedCase runs on the case-sync chain, and the follow is skipped while this device's own pick was not stored
- _caseStateSyncOn tolerates a harness without loadAppSettingsFromStorage
- lastPickedCase added to the config-backup volatile-key test and docs; rename rollback tests cover caseSettings and lastPickedCase
- wiki row moved to System
Codeman > Keep This Mac Awake in the macOS app: While Agents Work (an
agent at work, plus 5 minutes after the last one stops) or Always While
Codeman Is Open. Off by default, and only for a Codeman on this Mac.
- Idle sleep needs no password: the app holds an NSProcessInfo activity
with IdleSystemSleepDisabled, which the kernel drops with the process.
While it only watches for work, an activity that still allows sleep
keeps App Nap from slowing its look at the server.
- On a MacBook, Only on Power Adapter (on by default) pauses it on
battery, and Also With the Lid Closed installs a small LaunchDaemon
behind macOS's administrator prompt. It sets pmset disablesleep only
while the app keeps a fresh request file with its live pid, only on
the power adapter, and undoes only what it set itself. The app writes
the script and plist as root from the copies built into it.
- A status line at the bottom of the submenu says what it does now.
This brings the macOS part of the keep-awake idea from PR #595 into the
app; the server-side setting and the Linux route are left out for now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- follow lastPickedCase (written by saveLastUsedCase while sync is on), not lastUsedCase, so a quick-start or an agent's spawned worker no longer moves other devices
- close the open case-options popover when the follow or an import changes what it shows; follow through selectQuickStartCase(save:false)
- failed save reuses _noteSettingsWriteResult and says the choice lasts until the next sync
- rename undo renames the shared entry back instead of restoring the whole map; lastPickedCase follows a rename
- caseSettings and lastPickedCase added to the redaction, rename and backup-volatile lists and the docs
The 1.50.0 blink switched LEBacklightMode on and off. Every style was a lit
logo with short dark blips that differed only in how many there were, and
Working (Heartbeat) looked busier than Waiting for you (Wink), so urgency
read backwards. Each change was also a write to a setting corebrightnessd
keeps in root's preferences, and new users had to pick a style in three
submenus before anything happened.
Now one rule: the more the logo moves, the more it needs you.
- View > Blink Apple Logo is one switch, off until turned on. It shows
Breathe while agents work, Calm for a yellow tab and Alarm for a red one.
Each state can take another style under View > Apple Logo Blink Styles.
Picking a style turns the switch on, and turning it on with every state
off brings back those three.
- Breathe is new: a slow fade out and back in, every 6.3 s.
- The logo moves on the LED's own hardware fades (LEPWMFactorFadeDuration,
then DisplayLogicalState Blank or Unblank), as LogoLight measured them on
the real logo (MIT, reimplemented in Rust, not copied). A blink writes no
setting and leaves nothing behind a restart. LEBacklightMode is only read,
so a logo the user switched off stays off.
- The direction of a fade is tracked, because the daemon ignores a write in
the direction it already heads and the state can't be read back. When the
direction is unknown, the logo is turned round with a 1e9 s fade first.
- After every Blank the keyboards alone are told Unblank, and only while
the built-in display is awake (CGDisplayIsAsleep). They are told Blank when
it sleeps and Unblank when it wakes. When it sleeps, the fade duration
also goes back to automatic, as LogoLight does.
- A rise from exactly dark waits for a display frame, up to 0.5 s. Short
dark beats (up to 0.35 s) turn round before their fall ends, so they never
reach 0. Long ones time their light from when the rise starts.
- Every end puts the logo back: lit, with the automatic fade duration. A
new marker file (logo-fade) covers a killed child. 1.50.0's marker
(logo-blink) still switches back on a logo that version left off.
- While LogoLight runs, Codeman leaves the logo to it (process-name check),
and the app says so when the switch is turned on.
- Settings from 1.50.0 keep their styles, with the switch on if any was
chosen. All three off was that version's default, so it reads as
untouched.
The tests run the blink against a fake corebrightnessd that moves in
17.5 ms frames on the measured spring curve. It starts each fade 19 ms
after the write, ignores a write in the direction it already heads, and
holds a rise from exactly dark back by a configurable delay. They pin these
cases:
- dips never reach 0
- long dark beats keep their light
- no keyboard is told to light while the display sleeps
- every end leaves the automatic duration and a lit logo
- a logo switched off or driven by LogoLight is left alone
- old settings are migrated
An ignored probe (what_this_mac_answers) reads a Mac's displays,
processes, keyboards and logo without writing anything.
Not measured on the real logo, since there was no MacBook to test on:
- how the 0.12 to 0.36 s fades of the hard styles look
- whether a rise from a dip (about 7%) really skips the frame wait
- the keyboard during Alarm
- the keyboards through a real display sleep
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The fixes#529's review asked for, each with a test.
- No inline handler. The button quoted the path inside
onclick="...decodeURIComponent('<path>')", and encodeURIComponent leaves
' alone, so a file named x'-alert(1)-'.txt ran script in Codeman's
origin and it's.txt was a syntax error. It is now bound in the existing
.file-tree-item loops from the row's escaped data-path.
- Symbolic links are refused, never followed. validateSessionFilePath()
returns the realpath, so deleting AGENTS.md -> CLAUDE.md deleted
CLAUDE.md and left the link dangling. The path as named is lstat'ed,
a link answers 400, and the inode is compared again before the unlink.
- The edit route's confinement whole: validateLocalSessionFilePath()
behind withGuardedOutsideWorktree(), so an absolute path in a followed
outside worktree obeys the same rules, and the sensitive, blocked and
.git checks run on both the realpath and the path as named.
- Adopted sessions are refused like remote ones (the /tmp exception of
the older file surfaces is not copied to a new one); Docker workspaces
are allowed, as on the edit route. The workspace is probed bounded
first (#516). Errors are thrown with their status.
- Deleting from search results re-runs the search, the row buttons stay
visible on touch screens, the confirm and toasts have zh-CN text, and
no button is drawn for remote or adopted sessions.
- Docs: CLAUDE.md, architecture-invariants, api-reference and the
Working With Files wiki page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- session-ui.js: no GET /api/settings on a tab return unless this device's cached syncCaseState is true
- system-routes.ts: caseSettings is merged only while syncCaseState is true (as stored or set by the same PUT)
- sync-case-state tests cover both; wiki notes the stored options stay when sync is turned off
- Redact caseSettings for non-admins and never apply a shared map on a read-only page (CASE-SYNC-001)
- Send one case per save and merge it inside mutateSettingsFile, so devices cannot discard each other's cases; rapid saves keep their order (CASE-SYNC-002)
- Check HTTP status and the response body, keep the local choice, report an unsynced save and reuse the forbidden-write handling (CASE-SYNC-003)
- Let the server decide whether sync is on: refresh the cached switch, discard stale refreshes (CASE-SYNC-004)
- Carry shared options through case rename and drop them on delete or unlink
- Give the switch an accessible name; add server, client and two-browser tests
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The previous commit counted 4 rollback copies of the recurrent state for every GGUF with a
prediction layer, the runtime's default `draft_num_predict`. A tag can set its own in its
params layer, and the runtime then passes that as `--spec-draft-n-max`, which is what
`need_n_rs_seq()` turns into rollback copies. Read on 2026-11-08:
- qwen3.6:35b-a3b-mtp-q4_k_m: draft_num_predict 2, so 2 copies (was counted as 4).
- qwen3.8:27b-mtp-q4_k_m: draft_num_predict 4.
- qwen3.8:27b-q8_0: none in its params, so the runtime's 4.
The 35B-A3B GGUF row's overhead drops by 132 MB: 0.971 instead of 0.976 on a 36 GB M3 Pro or
M3 Max, the same pick. test/local-model-catalog.test.ts now carries the drafted tokens per row
instead of a yes/no prediction layer.
Also states what was verified about llama.cpp's checkpoint default: 8 from b6800 to b8200,
32 from b8250 together with a checkpoint every 8,192 prompt tokens (common/common.h at those
tags), in place of an inferred reason. Checked in the b12111 source as well: the draft context
of a Qwen-family MTP model caches the prediction block alone (`mtp_on_hybrid_qwen`, layers at
or above n_layer()), and the main context leaves it out, so the row counts that layer once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The weekly check's report and docs ask for an optional `digest` on each catalogue row, but the
catalogue keeps no digest on purpose: test/local-model-catalog.test.ts ("holds no download
data") refuses a `sha256` anywhere in it. Say so where the digest contract is described, so a
maintainer reads it as a decision for the catalogue, not a quick schema change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The catalogue that names each row's runner (feat/local-model-catalog-v2: `runner` is `mlx` or
`llamacpp`, and a row's memory figures follow that runner's rule) needs the weekly check to
notice when a tag starts serving a Mac another runner: a tag that gains an mlx child, or a
list that loses it. The size check usually catches that, but not when the two builds come out
about the same size, and the figures are wrong either way.
classifyModel() now raises a `runner` finding when the row names a runner and the build a Mac
selects runs on another one. catalogueRunner() maps the registry's names into the catalogue's:
`mlx` stays `mlx`; `llamacpp`, and `ggml` (what Ollama calls a GGUF manifest that names no
runner), are `llamacpp`, because Ollama 0.40.15 serves every GGUF build through llama-server.
A catalogue without the field (the one on this branch today) is never held to a runner.
Run live on 2026-11-08 against the v2 catalogue's eight rows: exit 0, every runner matches.
Tests: the mapping, the finding (both directions, ggml, an unknown runner, a row without the
field), the report text, and runCheck against the fake registry with a plain GGUF manifest.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The llama.cpp memory rule of the catalogue left out two allocations that the llama.cpp the
runtime bundles (b12111, the runtime's LLAMA_CPP_VERSION) makes for every GGUF row:
- Context checkpoints. For a model whose state cannot be rolled back (the recurrent state of
the Qwen-family rows, the sliding window of North Mini Code), llama-server keeps host copies
of that state, two or three per request, up to 32 per slot by default
(tools/server/server-context.cpp create_checkpoint). For the 27B that is 32 x 157 MB = 5 GB,
none of which was counted. The runtime now sets LLAMA_ARG_CTX_CHECKPOINTS=8 (read by
llama-server from its environment like LLAMA_ARG_CACHE_RAM; 8 was llama.cpp's own default
before it went to 32), and every llamacpp row counts 8 copies of its state.
- Multi-token prediction. The two -mtp tags and qwen3.8:27b-q8_0 carry a prediction layer
(nextn_predict_layers 1, read from the first bytes of each GGUF; the 9B tags and North Mini
Code have none). The runtime then always passes --spec-type draft-mtp --spec-draft-n-max 4,
so llama.cpp keeps 4 rollback copies of the recurrent state (need_n_rs_seq(),
llama-memory-recurrent.cpp) and the prediction layer's cache in the draft context's cache
type, f16 by default. The rows counted one state and that layer at q8_0.
What moves (test/local-model-recommend.test.ts, "every memory size", re-pinned):
- 16 GB: limited -> none. MiMo 9B at 65,536 tokens needs 10.2 GB, 0.987 of the 10.4 GB
estimate. With the budget the Mac mini measured (10.7 GB after the reserve) it is offered,
0.954, tight; that test is kept. With 4 checkpoints instead of 8 it would be 0.966 on the
estimate: this size sits on the edge, and only a run on such a Mac settles it.
- 18 GB: the same pick, 0.964 instead of 0.928.
- 36 GB: the same picks, 0.966 (27B on M4/M5 Max) and 0.976 (35B-A3B GGUF on M3).
- 48 GB on a Max chip: the 27B at 262,144 tokens is tight (0.853) instead of good.
- 32 GB with a measured budget of 0.74: North Mini Code at 131,072 tokens (was 262,144), the
27B at 65,536 on a Max chip (was 131,072).
- Every MLX row, and everything from 64 GB up, is unchanged.
test/local-model-catalog.test.ts recomputes the new rule from the architecture table and holds
the catalogue to LLAMA_ARG_CTX_CHECKPOINTS. The catalogue header, runtime.ts, the types,
docs/local-models.md, CLAUDE.md and architecture-invariants say the same. Read in the source,
not measured.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The migration's file comment and the invariants said a restored settings.json
stays as restored and that a refused start leaves the migration to the next
start. Both hold, but the first only once the migration has run: after a
first 1.50.0 start that found settings.json unparseable, no marker exists,
so an off saved between the fix and the next start is switched on with the
rest. That is the same "cannot tell a chosen off from the old default" trade
the release note already states, in a narrower window. Both texts now say
so. Comment and docs only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 48 GB row now says the test was a short task and that MLX may keep up
to 8 GiB more in a long session, which brings the pair to the edge of the
budget. The check after the download says what it proves for each runner,
from the runtime's source: for a GGUF build both of its figures are the
buffers llama-server reports allocating, so the check covers the whole
load whatever the cache type; for an MLX build only the weights. And the
docs say where a new row's architecture goes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/local-models.md gains "Which model fits which Mac": the answer of the
stock catalogue for every memory size from 8 to 512 GB, why the chip
changes it at 36 to 96 GB, and why nothing is offered below 65,536 tokens.
"How much memory a model needs" explains the two runners (llama.cpp
allocates its K/V cache at load, MLX grows it and keeps up to 8 GiB of
prefix snapshots), the three runtime settings the llama.cpp rows assume,
and per row where its memory and speed figures come from. The check after
the download now says that for an MLX build it proves only the weights,
and "What to know" says most figures are calculated, not measured.
CLAUDE.md: every row names its runner and carries its own figures, and
the llama.cpp rows and runtimeEnv() change together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
runtimeEnv() now also sets OLLAMA_KV_CACHE_TYPE=q8_0, OLLAMA_FLASH_ATTENTION=1
and LLAMA_ARG_CACHE_RAM=1024. Read in the v0.40.15 source of the pinned
runtime: the first becomes --cache-type-k/-v of llama-server (17/32 of the
f16 cache), the second --flash-attn on (a quantized V cache needs it, and
"auto" or "off" would fail such a load), and llama-server inherits the third
from ollama serve's environment, which bounds its host prompt cache to
1 GiB instead of letting it grow by gigabytes in a session. The MLX runner
reads none of them.
The catalogue's llama.cpp rows are computed for these values, so the two
change together. Not yet measured on a Mac.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The changeset, CLAUDE.md, the invariants, the agent control plan, both READMEs
and the wiki's Codeman Skill and Settings Reference pages said an install whose
App Settings were saved on an earlier version stays off until switched on. They
now say the first 1.50.0 start switches a stored off on once, and that turning
it off afterwards sticks. The changeset marks it "Behaviour change:", says the
migration cannot tell a chosen off from the old default, and tells users to
reload a tab left open from before the upgrade before saving App Settings in
it. CLAUDE.md lists the marker file among the data dir's state files, and the
invariants record why it stores true, why the marker is its own file, and
where it runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The skill-on-by-default change ships in its own pull request with the self-ignoring copy, so this branch keeps the old default and its wording. The local models guide no longer says nothing leaves the machine: the prompts go to the local model, while the coding agent may still check for updates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This reverts commit 0aa34da8, which made the codeman agent skill default on here as well. That change lives in feat/agent-skill-default-on, together with the self-ignoring copy and the reference-folder symlink check it needs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Codeman Agent Skill setting is now on by default, and the per-case
copy it writes lists twice next to the Claude Code plugin (codeman and
codeman:codeman), the same as a codeman skill install would. The README
and the wiki now say so and tell plugin users to turn the setting off.
The README's local model bullet said the session "sends nothing off the
machine". The server keeps the runtime on loopback with its cloud
features off, but opencode itself is not configured offline (its model
catalogue and update checks are untouched), so the bullet now says what
the code does: the prompts and files go to a model on this Mac.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The architecture note now says that install and uninstall refuse a linked
folder inside the copy, why (a cloned repository or a Docker case's
container can plant one), and that the check is not race-proof. It also
records which CLIs were checked live with the copy's ignore file in place:
Claude Code 2.1.319, Codex 0.162, OpenCode 1.3.0 and Grok 1.0.52 all list
the skill; agy, dsh, gemini and omp were not measured.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Copilot's registry entry takes no agent skill, like Pi and a plain shell, but
the changeset, the App Settings help text, the Settings Reference and
CLAUDE.md named only Pi (and the shell). The Agent CLIs wiki page still said
no CLI but Claude gets the bundled skill; every CLI except Pi and Copilot
gets it, in `.agents/skills/`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
agentSkillEnabled now reads an absent key as ON, the way
workspaceHooksEnabled does: only an explicit false turns it off. A new
session therefore finds the codeman skill in its folder without a
setting first, and with it the verbs that hand work to other CLIs and to
the local model on this Mac. Settings shows the switch on for the same
absent key.
The injection itself is unchanged: add-only, marker-owned, never through
a symlink, never for remote sessions or a plain shell. Turning the
setting off still removes nothing already written.
The quick-start test now pins the new default (injected on an absent
key, nothing after an explicit false), and the docs that said "default
off" say when that changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A row can pin its build only as `digest`, the value /api/tags reports
after the pull, and LocalModelEntrySchema must gain that optional field
before the weekly check can compare it. The script header and the docs
now say so, so the field cannot arrive under another name and be ignored.
Until it exists, the report's digest table names the build a Mac pulls
for each row and asks for the rows with measured figures first: their
memory figures describe one build, and without a digest a rebuild of
about the same size goes unnoticed. A switch between the mlx and the gguf
build is still caught by the size check (2% or more apart).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
scripts/check-local-model-catalog.mjs reads every catalogue tag the way
Ollama 0.40.15 on Apple silicon reads it: it asks for the manifest list,
takes the mlx build when the tag offers one (else llamacpp, else ggml),
and compares that build's pull total (layers plus config) with the row's
`bytes`. It also reports a tag that is gone, a build whose `requires` is
newer than the pinned runtime, a pinned digest that moved, a newer Ollama
release, and a pinned ollama-darwin.tgz that is gone or changed. It never
requests a layer, bounds every request, retries nothing and validates
everything that reaches the report. Exit 0 clean, 1 drift, 2 failed.
The plain Docker manifest of a list tag is the llamacpp build, not what a
Mac pulls. Read the right way, the first run finds two rows sized from the
wrong build: qwen3.5:9b (a Mac downloads 7,639,229,431 bytes, +16.6%) and
qwen3.8:27b (18,174,721,847, +2.4%).
.github/workflows/local-model-catalog.yml runs it Mondays at 06:00 UTC
and on dispatch. The check job installs with --ignore-scripts and holds a
read-only token; a separate job with issues: write and no checkout opens
or updates the one "Local model catalogue: weekly check" issue on drift,
comments on it on a clean week when it is open, and is skipped when the
check failed. Actions are pinned by commit.
docs/local-models.md gains "Keeping the catalogue current".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/local-models.md says how a Claude Code session drives the model on
this Mac through the skill (local_model, spawn_worker local, sendmark)
and what stays true: the skill never installs a model or answers a
confirmation, one request at a time, and Stop and Remove wait for the
workers it opened.
The README gets the local model as a feature with that pairing, and an
example prompt in the skill's table; the wiki's skill page gets the same
row and a short paragraph.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every place that called the Codeman Agent Skill setting off by default now
says it is on by default since 1.50.0, where to turn it off, and that turning
it off still removes no copy already written (`codeman skill uninstall --case
<name>` does). The README, the wiki's Codeman Skill page and the FAQ say an
agent inside Codeman usually has the skill without an install step, and that
the copy ignores itself in git.
Also written down: an install whose App Settings were saved on an earlier
version stored the old default and stays off until switched on; with the
Claude Code plugin installed, Claude Code lists the skill twice (both work);
and, in the invariants, the self-ignoring `.gitignore` rules and the
measurement that Claude Code 2.1.319 never runs `git check-ignore` on a skill
folder. The agent control plan keeps its original default-off decision and
gains a dated note for the flip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"A MacBook Pro whose Apple logo lights up" also describes the 2013 to 2015
Retina MacBook Pros, whose lid logo glows from the display backlight and which
run macOS 11 or 12, both of which the app supports. The View menu's Blink
Apple Logo exists only where CoreBrightness answers for the lid logo
(logo::available() in packages/desktop/src/logo.rs), which is a MacBook Pro
with a PROLED XDR display. The README, its Chinese mirror and the wiki now use
packages/desktop/README.md's wording, so the wiki's "the menu only exists on
such a Mac" holds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A dispatch with -f tag=<any tag> built that tag, and sign then ran the tag's
sign-macos.sh with the Developer ID key unlocked and the notary login in its
environment. Nothing checked the tag: xterm-zerolag-input@0.1.7 would have put
Codeman.dmg on that package's release, and a tag on a commit that never
reached master would have run unreviewed scripts with the secrets.
build and sign now each check their own checkout before anything else runs:
the tag must read codeman@x.y.z (or aicodeman@x.y.z, which a failed rename
leaves) and GitHub's compare of master with the checked-out commit must say
behind or identical. The check is inline, since a script from the checkout
would be the tag's own code. Release's own call (a push, not a dispatch) and
the branch dry run are unchanged.
The header says why a master-only Environment would not close this path, and
release.yml's macos-app job now says that any permission a called job asks
for must be granted there too, or Release fails at startup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The welcome screen's "Start Ralph Loop" button is gone (chore/remove-ralph-start-button), and it was the wizard's only entry point, so the page no longer offers the wizard as a second way in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
release.yml and docs/releasing.md take the branch's text, which is master's text plus the macOS app additions (its first commit copied both files from master).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts resolved as on test/desktop-macbook: config/test-suites.ts keeps both browser tests (desktop-connect-page and local-model-ui), and the CLAUDE.md state-files line keeps #778's cli-installed entry with the local model's local-model.json and local-model/ entries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Codeman maintainer