Hand the bracketed frame to the target terminal with input() so onData
scrolls to the bottom, clears the selection, and delivers the bytes.
The paste trap no longer writes the frame itself.
Fixes#716
Co-authored-by: DDT <1786035110@qq.com>
App Settings' save handled only the multi-user admin-only 403 and the tunnel's no-password 403, so a 409 for a settings.json that does not parse, a 400, a 500 or a dropped connection (`_apiPut` answers null) still toasted "Settings saved" and closed the modal, and the run mode and respawn preset writes failed with no word at all. Those failures now warn with the server's reason (else the HTTP status, else that the server could not be reached), the modal stays open, and nothing that assumes the server stored the save runs: Apply's refresh, the tunnel-starting toast and the gesture-control reload. Since the modal now invites a second Save, the plan-usage collection flip and the gesture reload are judged against the settings the failed save started from until a save lands, so the retry still sends the flip and still reloads.
A save with the tunnel switch on is read as a tunnel refusal only on a 403, so another failure no longer turns the switch off or shows the no-password message, and an accepted no-password retry now resends the whole save instead of the tunnel keys alone, which had left every other setting unsaved behind "Settings saved". Run mode and respawn presets stay saved on this device as before and now say they were not saved on the server. Stopping the tunnel from the welcome screen or the tunnel panel no longer says "Tunnel stopped" when the server refused the write, since the tunnel is then still running.
On every skin but og the skin block outranks the phone :active backgrounds of the toolbar buttons, so Run showed no press at all and the others at most a faint tint, eased in over their 0.2s transition, so a quick tap showed almost nothing. A press now scales and brightens (darkens on the light skins) over 80ms, two properties nothing on these buttons sets at a higher specificity, and honours prefers-reduced-motion.
A browser test presses every phone bar control on all seven skins and pins the computed transform and filter, so a later rule that takes the press away again shows up in the browser suite.
Both Update-Codeman.sh and Start-Codeman.sh derive PUID:PGID from the CODEMAN_APPDATA_PATH owner and refuse a root-owned directory. The smoke harness created that directory with mkdirSync, so under a root test runner (CI or agent containers) it was owned 0:0 and the script exited at that guard before its `build --no-cache` and `down`, failing the default and --keep-volumes smoke tests with an empty build/down log. The guard is correct; the harness now chowns appdata to 99:100 (docker/README.md's own example) when running as root, matching a real deployment.
Path links and in-document links carry a placeholder href (#, #fragment) that the click delegate resolves itself, but a middle click fires auxclick, never click, so the browser followed the placeholder and opened the dashboard root in a new tab. A middle click on those links now does what a click does; real URLs keep the browser's own middle click.
A remote-SSH session's workingDir is a path on the remote host, but the
Ralph file routes used local fs on it: fix-plan/read imported a same-named
LOCAL @fix_plan.md (or 404'd), and fix-plan/write and ralph-prompt/write
wrote their files into the local twin of the remote folder. Same root
cause as the Ralph @fix_plan.md watcher fix.
- fix-plan/read reads the file on the remote host through
src/remote-files.ts (the File Viewer's ssh path): one probe of the file
and the workspace, the File Viewer's confinement (a file resolving
outside the workspace is treated as missing), then a capped read (1 MB).
A missing remote file is the same NOT_FOUND as a missing local one; a
non-file, an oversized file or an unreachable host is a failed read,
never a local fallback.
- fix-plan/write and ralph-prompt/write refuse a remote session
(INVALID_INPUT): remote writes are out of scope by design, as for the
File Viewer's remote edit. The Ralph panel already shows the error.
A remote-SSH session's workingDir is a path on the remote host, and the
image watcher watched it on the local disk: a folder that is not there,
or a same-named local folder whose images then popped up as the remote
session's. Same root cause as the Ralph @fix_plan.md watcher fix.
Three places start a watch, and all three now skip a remote session:
setupSessionListeners(), the app-wide toggle in PUT /api/settings (which
re-watches every enabled session), and POST /api/sessions/:id/image-watcher,
which refuses to turn it on (INVALID_INPUT, like the Git fetch settings
route) and still lets it be turned off. The Session Options row is hidden
for a remote session, the way the Git tab is, since the client's
_apiPost() does not throw on a refused request.
KeyCode 229 recovery forwarded a composed character that xterm had
already delivered, so a desktop dead-key backtick arrived twice.
create() now attaches only when the primary pointer is coarse.
Ctrl+V text paste went through terminal.paste(), which drops the
CSI 200~/201~ markers after a replay clears xterm's DECSET 2004
mirror. Plain text is now a hand-built bracketed frame on the
session input path.
Fixes#716
Co-authored-by: DDT <1786035110@qq.com>
Handle untyped zero-byte POST streams at the shared API parser boundary.
Keep request.body undefined and preserve existing typed parsers, 404
fallbacks, authentication and webview proxy stream handling.
Reject nonempty untyped streams on the first byte, and cover parser
boundaries, raw HTTP framing and real WebServer routing with regressions.
The merged PRs (mostly #714's git fetch) added about 120 em-dashes in
comments, docs, test names and three settings strings. Each one is now a
comma, colon, semicolon or parentheses. The English settings strings in
index.html and their i18n.js keys change together, and the zh-CN value
for the fetch interval uses full-width parentheses instead of a double
dash. The one left is the regex in constants.js that matches a dash
typed as a word, which is behaviour, not punctuation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review follow-up for the L-shaped header strip:
- _syncTabStripCorner() keeps the plain wrap when the plain strip is
already past --tab-strip-max-height, checked before .tabs-corner goes
on: the float scrolled with the tabs while the toolbar stayed put, so a
scrolled strip put tabs under #headerRight, and a re-render of a
scrolled two-rows strip sized the float from the scrolled frame. The
"- scrollTop" in contentTop is gone (always 0 now).
- A strip just under its max-height that passes it once the float is in
falls back to the plain wrap as well.
- test/tab-strip-corner.browser.test.ts (real Chromium, real header and
styles.css), listed in BROWSER_TEST_GLOBS.
- src/web/CLAUDE.md Tab layouts entry describes the L-shaped classic strip.
terminalLinkLine() cut the URL's first row at its cell to stitch the URL, so a
path in a later column of that row was never scanned. The cut-off columns now
follow the stitched rows as a segment of their own, mapped back to their cells.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
spacedFilePathOnLine() refused only a FIRST word ending in `$`, so `/mnt/c/My Docs$ ls notes.md`
and `/mnt/c/Users/me/OneDrive - Contoso/proj$ code notes.md` linked the whole line. Any earlier
word ending in `$` now refuses the candidate, and both lines link what master links.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
readDockerCases() reads an unreadable or half-written docker-cases.json as [], so a fetch (which runs
repository hooks, and runs unattended on the interval) could run inside a Docker workspace. The fetch
paths now read it through a strict reader: the Fetch button answers a failed run (state 'error') and the
scheduler skips the tick, undoes its picks and logs once. The status and diff routes are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
settingsWrites() now requires every writeFile to be a settings.json temp file that a rename put in
place, with one rename per write, and the concurrent-stop harness stores a direct write to
settings.json at once. A stray fs.writeFile(SETTINGS_PATH) in the PUT handler passed all 34 tests
before and now fails 20 of them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The settings readers for git fetch and keep-warm no longer repeat V8's JSON.parse message, which
quotes the text around the fault and could print voiceSettings.apiKey. The 15 s scheduler tick now
logs an unreadable settings.json once, and again only after a successful read in between. Stale
comments that said settings.json is rewritten in place now say writes are atomic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts resolved by keeping both sides:
- CLAUDE.md (Agent CLI): #694's opening (an HTTP client, the experimental
agent-session-routes behind agentCoordinationEnabled) with #708's clause
on the directory spawn and its two refusals.
- docs/api-reference.md (codeman agent): #708's spawn paragraph and --json
shape, with #694's inspect/stage/submit in the verb list and the guarded
endpoints named before "adds no route for the other verbs".
- src/cli-agent.ts (@fileoverview): #708's quick-start / directory spawn
routes and #694's experimental routes in one endpoint list; the two
node:fs/promises imports (#708's realpath+stat, #694's open+stat) merged
into one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflict in CLAUDE.md (Adding Features, App setting) resolved by keeping
both sides: #714's sentence that a setting the server acts on must be
synced, after the `.strict()` clause, and #719's mutateSettingsFile() rule
at the end of the bullet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflict in src/web/routes/system-routes.ts (PUT /api/settings) resolved by
keeping both sides: #718's line that never stores an unauthorized
tunnelEnabled:true runs first, then #719's serialized mutateSettingsFile()
write replaces the inline read and plain writeFile.
test/routes/system-routes-tunnel-guard.test.ts: #718's new tests asserted
plain writeFile calls on settings.json. With #719 every write goes to a temp
file renamed over it, so the assertions read writes through a settingsWrites()
helper (writeFile contents keyed by their rename), and the concurrent-stop
harness applies a write and the stop at the rename.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- src/web/routes/session-routes.ts:2102: the guarded-submit 409 now applies to tagged input (clientId + seq) only; untagged input is held like a WebSocket frame. The raw write (:2228) goes through holdForGuardedLease and answers 200 once held (a send-and-wait reads `delivered` from the held write; a full queue releases the waiter and answers 409); a mux write takes its own turn in writeViaMux.
- test/guarded-lease-held-input.test.ts: real-Session route tests for an untagged raw POST during the lease (written after the Enter) and a held send-and-wait (delivered: true); both fail without the fix.
- test/routes/session-routes.test.ts + test/mocks/mock-session.ts: the 409 test now covers tagged input only; new tests for untagged raw (held), untagged mux (own turn) and a full hold queue (409); MockSession gains holdForGuardedLease/releaseGuardedLease and a lease-aware writeViaMux.
- src/session.ts:4787 (guardedInputHeld JSDoc) + write() + docs/architecture-invariants.md: write() refuses during the lease only, so cron's paste mode can land ahead of input still draining.
- docs/api-reference.md: the input route's 409 is for tagged input; untagged input is held.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Session update no longer resets "How often" while typing: updateGitFetchStatus
(session-ui.js) leaves a control alone while it is document.activeElement, and
autoSaveGitFetch writes the clamped interval back itself (Enter saves with the
field still focused).
- Partial override shows the app values: enabled = session ?? app switch,
interval = session ?? app interval ?? 300 (session-ui.js updateGitFetchStatus).
- runFetch (git-fetch.ts) arms the spawn with what the core.sshCommand read left
of timeoutMs, and answers ETIMEDOUT without spawning when nothing is left, so a
git that never answers costs one timeout, not two.
- fetchEnvFor keeps a GIT_SSH from the server's environment (repoSshCommand ||
base.GIT_SSH), fileoverview and CLAUDE.md line updated to say so.
- i18n.js: the zh-CN "Git fetch on an interval" description scopes the only
writing git command to the Git window.
- styles.css: the disabled/busy rules are scoped to .git-status-actions
.btn-icon-sm (moved beside .git-status-actions), and the busy pulse stops
under prefers-reduced-motion.
- Comments that called the override per case now say per session: session.ts
(field, restore and getter docs, setGitFetchSettings), git-fetch-scheduler.ts:2,
server-timing.ts:78, server.ts (cleanup and restore), app.js _onSessionUpdated,
session-ui.js (openSessionOptions and updateGitFetchStatus).
- Tests: test/git-fetch-session-options-ui.test.ts (new, JSDOM: typing survives
an SSE update, the Enter write-back, both partial cases); test/git-fetch.test.ts
(GIT_SSH kept; one bound for the read and the fetch, stub git on PATH).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A remote-SSH session's workingDir is a path on the remote host, but
setupSessionListeners() handed it to the Ralph tracker, whose
RalphFixPlanWatcher reads and fs.watch()es it on the LOCAL disk. Where the
path does not exist locally (the usual case), every server start logged
[RalphFixPlanWatcher] Could not watch @fix_plan.md: Error: ENOENT ...
once per remote session; where a same-named local directory did exist, it
watched the wrong tree. Setting the path also made the tracker treat that
unreadable file as authoritative (isFileAuthoritative is "a path is set"),
which switched off its output-based todo completion for remote sessions.
Skip the tracker's working dir for remote sessions, next to the existing
external-CLI skip.
- test/cli-agent-project-spawn.test.ts:345: the doc-sync test no longer reads .changeset/project-worker-directories.md (changeset version deletes it at release); README, API reference and wiki stay.
- CLAUDE.md:132 + src/cli-agent.ts @fileoverview (invariant 5): the directory spawn (POST /api/v1/sessions plus /interactive or /shell, no Agent-Origin header, so no marker) and its refusals (empty --working-dir, bare spawn from a HOME cwd); the invariants now name test/cli-agent-project-spawn.test.ts too.
- test/cli-agent-project-spawn.test.ts:322: "allows a cwd below HOME" mocks the cwd to <temp HOME>/src/app, so it covers the case the guard must leave alone.
- docs/wiki/Driving-Codeman-From-An-Agent.md:59: split the sentence so exit 4 covers only the empty --working-dir; spawn "" reaches quick-start and exits 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- constants.js:2296,2301 spacedFilePathOnLine: refuse a first word ending in `$`
and an earlier word with no letter or digit (other than a bare `-`), so a
shell prompt showing an absolute working directory (`/mnt/c/proj ❯ code
notes.md`, `/home/me/proj$ cat notes.md`) keeps master's links; the six rows
from the review are pinned, plus OneDrive, `Program Files (x86)` and
`Docs - Copy` still linking whole.
- constants.js:2312: the leading strip is now `/^(?:~?\/|(?:\.\.?\/)+)/`, so
`Saved to: ../My Docs/plan.md` links whole; an interior `..` still links
nothing. Tests for the detector and the terminal provider.
- app.js:3032 _linkifyFilePaths: carry any leading bold label and let
spacedFilePathOnLine() judge it, and give a text node that follows another
inline element a placeholder word, so `**Note:** /home/me/proj/out
report.pdf` and ``Use `--config` /home/me/proj/cfg data.json`` split as in
the terminal; a spaced path inside inline code still links whole. The
now-unused label-pattern guard is gone.
- JSDoc (findFilePathLinks, SPACED_FILE_PATH_LABEL_PATTERN,
spacedFilePathOnLine) and the spaced-path paragraph in
docs/architecture-invariants.md updated to match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- session-ui.js _reloadCasesAfterRun: reload onto the toolbar's own case after every launch, not only one that names its case; comment updated
- test/tab-new-session.test.ts: a worktree tab's "+" Claude launch, the toolbar Run and a group's "New session" each keep the toolbar's case after a "+" moved lastUsedCase (fail without the fix); the reload setup is shared with the existing lastUsedCase test
- docs/architecture-invariants.md:349: the _reloadCasesAfterRun sentence covers every launch
- app.js _openTabLayoutMenu focusout: focus landing on the trigger is not a departure, so pressing the "+" again closes its picker in a real browser
- tab-rail-resize.js openTabRailActionMenu: close the group menu too, so the rail's ... pressed again does not leave the picker beside the row menu
- tab-rail-resize.js:329-331: the "New session here…" comment no longer says Enter on the "+" does nothing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- test/command-palette-agent-arrows.browser.test.ts: drop the page.screenshot()
that wrote /tmp/codeman-21-palette.png on every browser-suite run (nothing read it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- src/web/settings-writer.ts:110: export assertSettingsWritable(), the writer's own read-for-write rule run on its own
- src/web/routes/case-routes.ts:1860: an admin's rename checks settings.json before it ends any session or moves the folder, and answers 409 CONFLICT with the writer's message (placed before the session-starting check, so nothing is awaited between it and the lock)
- test/routes/case-rename-routes.test.ts:314: the torn-file pin now expects 409 CONFLICT (no stoppedSessions, like the other pre-checks)
- test/routes/case-rename-routes.test.ts:331: new test, a live session with stopSessions and a torn file: 409 CONFLICT, cleanupSession not called
- docs/api-reference.md: the Settings paragraph says an admin's rename answers this refusal as 409 CONFLICT before ending sessions
- src/hooks-config.ts:1161, src/prompt-cache-keepwarm.ts:341: comments describe the atomic writer, not an in-place rewrite
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- constants.js:2618 terminalUrlContinuationExtent: trailingColumns now needs a
one-row first line (first.startRow === first.endRow), so a URL row that
soft-wraps with a column on its wrapped part no longer glues the next row
onto that column (`/tmp/report.txtccc/x.html` at 41 columns); master's links
come back. Negative tests for the extent and the link provider.
- constants.js:2847 terminalCellWrappedPaths: comment reworded to match the
JSDoc (the exception is a left-column PATH), plus the wrapped-prose case.
- docs/architecture-invariants.md, CLAUDE.md: one clause that a left column of
wrapped prose (a Description | Path table) also fills the continuation row,
so the path beside it keeps its per-row fragment links, the safe direction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- docs/api-reference.md:1222: the tunnel status shape is { running, url, loginConfigured } (getStatus() returns only running and url)
- src/web/routes/system-routes.ts:1233: the unauthenticated-tunnel warning keys on !isLoginConfigured(), so it no longer fires in multi-user mode
- test/install-sh-invariants.test.ts:537: install.sh must not contain --allow-unauthenticated-tunnel either (it writes service argv as well as env)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The input lease is held across the awaited tmux Enter, so WebSocket frames
keep arriving while it is held. A tagged frame (seq N) was refused and its
seq rolled back, but the browser's WebSocket path does not wait for ACKs:
seq N+1 landed after the lease and moved the watermark past N, and the
redelivered N was then dropped as a duplicate. The keystroke was lost.
Input that arrives during the lease is now held and written in arrival order
when the lease is released, whatever the submit's outcome. A WebSocket frame
is applied and ACKed only once written; managed writes (writeViaMux) and
named keys (send-key) wait for their turn the same way, and a held write that
is still being sent holds everything behind it. A keystroke held before the
guard runs still moves the input revision, so it still invalidates the Enter.
The hold is capped per lease (256 inputs, 1 MiB): past it the WebSocket is
closed with 1013 and nothing later from it is applied, so the browser resends
every unACKed frame in order, and send-key answers 409 CONFLICT instead of
logging a tmux failure as INTERNAL_ERROR. POST .../input keeps its 409 for the
lease plus the held input's drain; its browser drainer is serialized.
Docs: correct the api-reference paragraph that said these keystrokes are
redelivered, and describe the capture fallback and the per-scope cursor cap
from the previous two commits in api-reference, architecture-invariants and
the changeset.
Cursors shared one global FIFO of 1,024 and were never retired on use, so one
agent polling every second evicted every other caller's cursors after about
17 minutes. Each owner and session now keeps its newest 8 cursors, older ones
retired first, under the same global backstop; the cursor just used stays
among the newest, so a retry of the last call still works.
The combined capture-pane and cursor query swallowed a thrown error and the
caller then ran the same capture again, so a hung tmux blocked the event loop
for two 5 s timeouts on every visible-frame capture, which serves every
GET .../terminal load. A thrown error now reaches the capture's own catch;
only output that splitFrameAndCursor cannot split falls back to the two
separate calls. The capture runs through a captureRunner() seam, like
inputRunner(), so the tests count the tmux calls each path makes.
`codeman agent spawn` always sends its directory as an explicit
workingDir, so the server cannot apply its no-workingDir rule and
installs workspace hooks (and an injected skill) into ~/.claude when the
caller's cwd is HOME. A bare spawn whose cwd resolves to the home
directory now refuses with exit 4 before any request and names
`--working-dir ~`; an explicit `--working-dir ~` is still sent. Paths
are compared by realpath, so a symlinked HOME matches, and an
unresolvable HOME or cwd falls back to the resolved path without
throwing.
The directory-spawn --json shape now reads the same in the README, the
API reference, the wiki page and the changeset: `ready` when a
readiness wait ran, `readinessError` when that call failed, and
`startupError` when the start failed. A test pins all four.
The network acknowledgement that install.sh writes for every passwordless LAN install also satisfied the tunnel guard, so one click on the welcome screen's tunnel link published full terminal control to a public URL with no login and no confirm. The tunnel now needs CODEMAN_ALLOW_UNAUTHENTICATED_TUNNEL or --allow-unauthenticated-tunnel (carried by web -d and service install), and with no login the browser asks before every enable, reading a new loginConfigured field from GET /api/tunnel/status.
The guard is now decided once per request and required again where the tunnel starts, so a save that found the tunnel running can no longer restart it unguarded after a concurrent stop.
Closes#706
Quick-start saved lastUsedCase with an un-awaited, non-atomic read-modify-write, and the settings PUT, model config, case order, case rename, Ralph start and the boot tunnel reset each ran their own. Two overlapping truncate-then-write calls left one write's bytes over the tail of the other (the CI flake in test/quick-start.test.ts), and most writers then read the torn file as {} and wrote back only its own keys, erasing the rest of the user's settings.
All of them now go through one writer that runs one change at a time, replaces the file atomically, and refuses (409 CONFLICT) to overwrite a file that does not parse.
The + announces a menu but Enter and Space did nothing on it, and the header strip has no row menu to fall back on. A + on a Docker tab the toolbar has not selected read only the link-time mode list, since nothing probed its container.
Opening the picker from the keyboard focuses an entry, so a held Enter or Space repeated onto it and launched that CLI; the shared tab-layout menu now ignores a repeated Enter or Space.
`execFile` signals the `git` parent only, so a fetch that times out can leave its http helper
still running, and on the interval that repeats every run with nobody watching. `runFetch` now
spawns `detached`, so the fetch and the helper it spawns share one process group, and the kill
is SIGTERM to the negative pid then SIGKILL `FETCH_KILL_ESCALATION_MS` later; the escalation is
not cancelled when the promise settles, because the caller is answered at the timeout while the
group is still dying. The output cap is kept, and the clone's slot queue is not needed here.
The tick is two passes: every enabled local session is collected by folder, a folder is due when
ANY session open on it is due, the folder is probed once for the group, and the run is published
to every session on it. A single pass decided by the order the sessions were read, so [long,
short] published only the short one and the 3600 s session's row never updated again while its
folder was fetched every 30 s.
`gitNonInteractiveEnv` writes BatchMode ssh as a default, not an override: `core.sshCommand` is
read inside the same slot and the same bound as the fetch it serves, and `fetchEnvFor` keeps the
repository's answer when it has one, because that is usually the setup that works on a machine
with several ssh setups. The `accept-new` host key it can write is stated next to the BatchMode
note: a prompt is stopped, a write is not.
The write claim is scoped to the Git panel and to the timer, with cloning and worktree management
named as the writes that happen when the user asked for them, and the zh keys sit with the group
of the UI surface their English string belongs to.
Tests: the process-group test proves the tree by group membership, because the helper is a
grandchild (`git fetch` runs `git remote-http`, which spawns `git-remote-http`) and because the
group is what the negative pid reaches, and it remembers each process once found instead of
re-scanning a group it had already emptied. The non-zero-exit test changed premises: `git fetch
--quiet` in a repository with no remote exits 0 on git 2.47.3, so resolving empty stdout there was
correct, and the case that has to reject is a remote pointing at a path that is not a repository.
The join test asserts after the run and does not await the request before the held run is
released, which would wait on the run the test is holding.
Stage now re-reads the pane after typing (every 50 ms, up to 1 s) and
issues a receipt only for a frame with the same generation, the input
revision its own write moved, and a composer hash equal to the
message's. Codex repaints 30 to 60 ms after the keys, so the first
capture was often stale and stage refused with the text already typed.
Every refusal after typing now says the message may be in the composer
and points at the Ctrl+U recovery. A visible-frame capture reads the
screen and the caret in one tmux invocation, with the old two calls as
the fallback.
Codex draws its suggestion popups above the composer and keeps the
footer, so a staged /stat verified and submit ran /status. Stage now
refuses a leading / or ! and a last word starting with @ or $ before
typing, and stage and submit refuse a frame with popup rows just above
the composer. The pattern and characters are registry data
(composerPopupLine, composerCommandPrefixes, composerCompletionSigils),
read from the codex 0.162.0 bottom_pane sources.
Submit waits until 250 ms after the staged keys: codex turns an Enter
within 120 ms of a typed burst into a newline. POST .../input answers
409 with its seq returned while a guarded submit holds the input lease,
instead of 200 for bytes it never wrote.
Also align the attribution memo comment with the code (a verified file
whose incremental scan fails is not re-walked, since the full walk
reads a superset), and list stage as a fromUser source in CLAUDE.md.
A wrapper wraps every column of one table row together, so the row that
carries a cell's continuation is blank to the left of that cell unless a
path in a left column continued on it too. A label there (`Entry`,
`│ Helper │`) opens the next record, so a directory ending in `/` or `-`
(`Workspace /home/u/proj/app/` over `Entry main.py`) no longer takes
the next record's file name.
What still joins is a trailing-slash directory over a relative path in the
same column with nothing to its left, which reads exactly like a wrap at
`/`; that trade-off stays pinned.
Codex's local_thread_store_compression rewrites cold rollouts to
*.jsonl.zst, which the store scan skipped without a trace. Each one is now
counted in compressedFiles (complete: false), skipped only when its plain
.jsonl sibling exists, as Codex's own discovery does, and a lookup that
misses names the compressed file whose name carries the wanted id. A
Zstandard file given to --file, or sitting in the store under a .jsonl
name, is recognised by its magic number.
Each selected rollout is parsed once into every view later needed of it,
so a legacy copy's boundary proof reuses the parent's own read instead of
charging it to --scan-bytes a second time (and counting its malformed or
inherited records twice).
A parent read that fails for any reason other than a budget now leaves
the boundary unproven (cut at the last candidate, unverifiedPrefixes,
complete: false) instead of failing a child whose own file is intact. A
budget error still fails the read.
--max-bytes is validated before the first file is read, next to the
other budgets, and every budget flag accepts plain decimal integers only.
