- remove() drops the session's slot once the file is gone: a session that comes
back with the same id (reboot restore) starts afresh instead of answering
`removed` until the next restart. A run in flight stays on its own slot's store,
and the routes start a sync in the same tick as their session check, so a
deletion right after it still stops that sync. A store that is not loaded is
deleted without being parsed (deleteStore).
- A new conversation (/clear, resume) first reads the previous transcript, next
to the new one, to its end with its subagents, so edits it got after the last
read are not lost with its cursors. "Load older" reads the stored conversation
while the switch is pending.
- At most MAX_LOADED_STORES (3) stores stay in memory; the least recently used one
without a run is written if it changed (settle) and loads again on demand.
- Tmp files are named per process start, so a reused pid (a container's pid 1)
no longer keeps a stale one through the startup sweep.
- load() keeps only a plain transcript id (the previous transcript's path is built
from it) and no cursors without one; a pending Bash call with an id, cwd or
agent id over 4,096 characters is not kept at parse time either.
- nextRange() is gone: production reads forward through the reader. The store
tests mirror the reader's range choice, and a new end-to-end test runs the
real reader, sync and store (/clear cases, 40 seeded random transcripts).
- The wiring guard scans all of src for holders of the sync.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Forward: after a line longer than the budget, the next line is read from
its start instead of being skipped with it when it crosses the chunk end.
- Backward: the line before a skipped long line is read whole; a floor that
turned out to be a line start no longer stalls.
- A chunk the shared forward budget cut short is not applied (it read as one
over-long line) but read in a later pass, so a first open of a long main
transcript reaches the subagents in the same sync.
- Load older reads a full budget block of up to three transcripts per click,
taking turns, instead of splitting one budget (a normal Write longer than
the share was skipped for good).
- A subagent transcript that vanished loses its cursor, so Load older does not
stay on forever.
- POST /api/cleanup-state forgets the history of every record it drops; a
startup sweep deletes edit-history files no session or record owns and
stale tmp files of other processes.
- load() rebuilds entries from known fields (string diff lines, per-edit cap
re-applied, ids counted against the byte cap), bounds pending Bash fields
and agent ids, and does not parse a file over 32 MiB.
- No re-read after Codeman's own keep-alive turn.
- Tests: regression tests for each of the above (they fail on the previous
commit); the remove-during-write test now meets the write under way; the
sync and route tests remove their stores before the temp dir, so no late
save recreates it in /tmp.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- The history is deleted when the session's persisted record goes (forgetEditHistory):
kill via cleanupSession (a pinned record is only demoted and keeps it), the
persisted-only DELETE, and stale cleanup at startup. After remove() neither a sync in
flight nor a later request writes the file again; writes are serialized.
- load() re-bounds a damaged file: cursors, pending Bash calls (MAX_PENDING_BASH) and
subagent labels (MAX_AGENTS, oldest unused dropped first).
- Load older reads one block of every transcript, budget split between them, and only
the files it asked for; a block short of budget reads its end. A line longer than the
budget is skipped going back as well (floorMidLine).
- Concurrent first callers share one store; a forward request folded with an older one
still reads forward.
- Images outside the workspace get no thumbnail (one attachment id per render); a click
opens the shared preview, which registers once with notify: false.
- Docs: per-edit diff cap, deletion rule, load-time bounds, thumbnails, follow triggers.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Part 1 of #643 (local sessions only; remote follows as its own PR). An
opt-in, per-device header button opens a panel with the active session's
edits, newest first: every Edit/Write/MultiEdit/NotebookEdit of the main
agent and its subagents with its diff, plus images a Bash call rendered or
the agent sent. Remote, Docker and non-claude sessions answer `unsupported`.
- Reads only on request: `?sync=1` when the panel opens; while it is open on
that session it re-reads after an edit-capable `transcript:tool_end` or a
`transcript:complete` from the existing transcript watcher. No hook, timer,
second watcher or new SSE event; a wiring guard pins it.
- Main transcript: the path the transcript watcher follows (hook-reported),
else `<id>.jsonl` under the session's own CLAUDE_CONFIG_DIR override or
the server's config dir. A config dir set outside Codeman is found with
the next hook; until then the panel says so.
- Store: dataPath('edit-history')/<id>.json, 0600 via tmp+rename, capped at
500 entries and 4 MiB of diff text per session, deleted with the session,
blocked in isSensitivePath, never fed to /api/search. Every route goes
through findSessionOrFail with req.
- Images only through existing file surfaces: file-raw inside the
workspace, the attachment route with notify:false outside it.
- textContent rendering, bounded byte-offset reads, marker-class header
button, hidden on phones (locked in the mobile policy test).
Docs: Working-With-Files, Settings-Reference, architecture invariants, API
reference, CLAUDE.md key pattern.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict in CLAUDE.md's State Files line resolved by keeping #661's new
config-backup entries and this PR's "case default groups" in state.json.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts in CLAUDE.md, README.md, docs/api-reference.md and
src/web/server.ts were additions beside #662's Copilot quota read and
#666's keep-warm sections; both sides kept.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Squash of PR #658. Discovery records each llama.cpp model's parallel slot
count (from --parallel/-np, or /props total_slots when the launch command
states none), and a Claude launch warns when the context split across
those slots leaves less than 40K tokens per request. An explicit
--parallel beside a /props context records a slot count of 1, so a later
round overwrites an earlier count, and a non-2xx /props is remembered per
launch command while a network error is retried.
Merge-time fix by the maintainer: the architecture-invariants sentence on
the explicit --parallel case now says it records a slot count of 1.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Merge-time fix for #676 (review nits 4 and 5). sessionCreated forgot a stale
case default inside the try whose catch rolls the registration back; it now
does so after the try, once the session is committed, so the cleanup can
never drop a committed session from the live map. caseDefaultGroup (behind
GET /api/cases/:name/default-group) no longer deletes a stale id as a side
effect: it reports Ungrouped and leaves the value for the next creation to
forget. The two tests that expected the read to clear it now expect it to
write nothing; the creation test still pins the cleanup.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Merge-time fix for #676 (review finding 1 and nit 7). The Git worktrees modal
launches Claude through POST /api/sessions with workingDir
<case>/.claude/worktrees/<name>, which inferLocalCaseName did not recognise,
so the session landed in Ungrouped while the same gesture for any other CLI
(quick-start with the case name) landed in the group. The inference now
strips a trailing .claude/worktrees/<name> lexically before its two checks,
reusing CLAUDE_WORKTREE_PATH (hoisted to module scope). It also runs only for
a named workingDir, never on the server's own cwd, as the hook and skill
injection above already do. Route tests for both, failing without the fix;
api-reference and architecture-invariants say so.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Merge-time fix for #661. The pre-restore copy was forced, so a restore made
while the live files equalled the newest backup spent a retention slot on a
duplicate. It now goes through the normal change check: when nothing changed
since the newest backup, no copy is made and safetySnapshot names that
backup. Two tests that relied on the forced copy now change a file before the
restore; a new one pins the reuse.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Merge-time fix for #661. A restore that could not write one file (a full
disk, a directory where the file should be) used to stop there and answer a
bare 500, naming neither the files it had already put back nor the
pre-restore copy, and the Settings form was not re-read, so the next Save
wrote the old settings back over a restored settings.json.
restoreConfigBackup now writes every verified file it can, then throws
ConfigBackupPartialRestoreError with restored, failed (name and error),
untouched and safetySnapshot. The route runs the same reload hooks and audit
for the files written as a full restore does, and answers 500 with the error
envelope plus those fields (and restartRequired) in data, as the tab-layout
409 carries its layout. Settings refills the form when settings.json is among
the restored files, also on that path. Tests: a unit case where a later file
is still restored, the clis.json-as-a-directory route case, and two vm cases
for the Settings handler.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Merge-time fix for #666. `recordHookEvent()` ran for every `stop`, the run
summary files a `stop` as a warning, and the Away digest lists warnings under
Needs Attention, so each keep-alive nudge added a row there and to the
session's Summary timeline. The hook route now skips the run summary while
`keepAliveReason` is set (the keep-alive turn's `stop` and `idle_prompt`).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Case settings gains a "Default session group" selector (Ungrouped plus every
named tab group of the owner). A new session of the case lands in that group
in the same versioned layout write that registers it, so it is drawn in place
with no Ungrouped-to-group jump.
- Stored per owner and case in state.json (caseDefaultGroups), as the group's
stable id or null for Ungrouped; read and written only through
TabLayoutService under the owner lock.
- Precedence in sessionCreated: explicit tabGroupId, then the parent
placement, then the case default, else Ungrouped. A deleted or foreign id
never fails a spawn and is forgotten only after the creating write lands.
- POST /api/quick-start (local, linked, remote, Docker) and
/api/ralph-loop/start pass their case; POST /api/sessions infers it
lexically from workingDir. The create response carries tabLayout when a
case default placed the session.
- GET/PUT /api/cases/:name/default-group; deleting a case (or an admin
deleting a user's case folder) forgets the value.
- The selector mirrors desktop and phone, reverts on a refused save, and is
redrawn from every adopted tab layout; zh-CN strings added.
sendwait posted its prompt as is. With the mux now keeping line breaks, a
multi-line prompt goes in as a paste, and right after spawn_worker returns it
can land inside Claude Code's Enter-ignore window. Neither the Enter loop
here nor the server's submit check recognises a pasted block that is still on
the composer, so `Review this:\n- item 1` sat unsent while the re-wait ran
out. sendwait now trims each line, drops blank ones and joins the rest with a
space before building the body, the same result as toSingleLine, like every
other waiting sender.
The preamble stamp moves to 1.43.1 so cached preambles pick the change up;
the plugin mirror is regenerated with scripts/sync-plugin.mjs. The new test
runs the real preamble.sh with CURL stubbed and fails without the join.
docs/api-reference.md gets the submit-check sentence the README and wiki
already carry.
Co-Authored-By: Christian Haberl <116439789+christianhaberl@users.noreply.github.com>
Co-Authored-By: Claude <noreply@anthropic.com>
"\nfix it\r" pasted an empty first line. Leading line breaks are now
dropped like trailing ones. Document what useMux does with a line feed,
and that a pane without bracketed paste receives each pasted line break
as CR, so a multi-line write without \r runs every line but the last
there, where the old line-stripping typed the joined text and ran nothing.
Co-Authored-By: Christian Haberl <116439789+christianhaberl@users.noreply.github.com>
Co-Authored-By: Claude <noreply@anthropic.com>
Review round 3 on #661: retention aged each snapshot by its own createdAt, so the first change after a quiet month deleted the last good copy; it now ages from when the next snapshot was made. users.json lastLoginAt, settings.json lastUsedCase and intents.json recentPrompts/updatedAt are volatile keys for the change check. The keep count has a minimum of 2. Wiki restore paragraph aligned with RESTART_REQUIRED.
Review round 2 on #661: the hostname in the origin orphaned every snapshot when a Docker container was recreated, so the origin is a random id kept in <data dir>/config-backup-id; after restoring settings.json the Settings form is re-read from /api/settings so Save cannot write the old values back; the restore confirm names the files and the credential ones; clis.json is reloaded (reloadCliRegistry) and users.json needs no restart; API reference and route docs corrected.
Settings -> System -> Config backups gains a Compare view: a backup against the
running config, a backup against the one before it, or any two backups. Each
differing file lists its changed keys as before/after, plus files that appeared
or vanished. GET /api/config-backups/diff?from=&to= serves it (`to` defaults to
`current`; admin only in multi-user mode).
Credential values are never returned: .env, users.json and push-keys.json report
names only, and any other key that looks like a token, secret, password,
credential or key is reported as changed without its value. A non-JSON file
reports only that it differs, a file is cut at 200 changes, and a self-refreshed
discovery timestamp does not count as a difference.
- New wiki page Config-Backups: what is backed up (and what is not, and why), when a backup is made,
where and under what name (cfg-YYYYMMDD-HHMMSS, manifest.json, reasons), retention and its
guarantees, the Settings controls, restore (verify, pre-restore copy, atomic write, which files
need a restart), security, the HTTP API and troubleshooting.
- Linked from the Home index and sidebar; Settings Reference, Troubleshooting ("my settings were
reset"), Security and Core Concepts updated; README and CLAUDE.md entries; the api-reference
section now states the naming convention and the full tracked list.
- Found while documenting: remote-hosts.json, docker-hosts.json, docker-cases.json and
webviews.json are user configuration too and were not tracked; they are now. state.json stays
out on purpose (rewritten per session event, also holds cron jobs and respawn presets) and the
docs say so.
The files that hold a user's customization (settings.json, clis.json, custom-model-hosts.json,
webhook.json, intents.json, linked-cases.json, push-keys.json, users.json, .env) are plain JSON
in the data dir, rewritten by the server, the Settings UI and the CLI, with no copy to go back to.
A snapshot is taken at startup and whenever the tracked files' content changes (checked every
five minutes, and only written when a digest of the file set differs from the latest snapshot's),
into `<data dir>/backups/config` by default or any absolute folder. Retention keeps the newest
configBackupKeepCount (1-500) and, when configBackupKeepDays > 0, drops older ones; it only ever
deletes folders it made (name pattern and a parseable manifest) and never the newest.
GET/POST /api/config-backups list and back up now; POST .../:id/restore verifies every file against
the manifest's SHA-256, takes a pre-restore snapshot, then replaces files atomically with mode
0600, writing only allowlisted names. Snapshots are 0700 folders of 0600 files and all routes are
admin only in multi-user mode. Settings -> System gets the controls and a Restore list.
Claude Code draws its prompt suggestion in an empty composer, the first letter in the reverse-video cursor cell and the rest faint, so a plain capture read it as typed text and keep-warm never nudged those sessions. The keep-warm pane read now uses capture-pane -e and drops the suggestion before checking the composer.
Also from review: an off status carries no window, automation and an unreadable composer retry instead of stopping, a failed evaluation re-arms a retry, a trigger during an evaluation queues one follow-up that remove() cancels, and the cap's clock is seeded from lastSubmitAt for pre-upgrade state.
Only a human spends an idle alert, but the keep-alive turn resolved an unseen one three ways: its working transition, its stop hook, and its own idle prompt replacing the item with a pre-acknowledged one. While the turn runs, a pending idle item is now left exactly as found, the page's stop handler returns on the keep-alive reason before clearing hooks or raising Response Complete, and session:working/session:idle carry keepAlive so the stuck-detection timer neither restarts nor re-arms.
The window that marks the turn closes on its own idle prompt or any other submit instead of a fixed three minutes, which a slow turn's idle prompt (sent a minute after the turn ends) could outlast. The service keeps the default and cap in memory, read through a strict reader so a mid-write read is retried rather than kept, and the cap is clamped before the strict settings save.
Claude Code lets a subscription's one-hour prompt cache expire after an hour idle, and the first turn back re-writes the whole conversation at the cache-write rate; nearly every gap over an hour goes cold, while the saving is concentrated in gaps of one to four hours. Codeman now sends one short keep-alive turn five minutes before the expiry Claude Code reports on its statusline, so the next real prompt still reads the conversation from cache, and stops two hours (configurable) after the last real prompt.
Codeman owns the idle policy for these sessions, as agreed in Discussion #554: a launch with keep-warm on also carries idleCompaction: false in its one --settings JSON, so Claude Code's own idle compaction cannot replace the conversation with a summary a minute before the nudge. It is decided once per launch (keep-warm on, the statusLine exporter injected, Claude Code 2.1.290 or newer, an unknown version fails closed like --name), recorded on the mux record, and picked up by any relaunch; a launch with keep-warm off is byte-identical. A session switched on after launch is kept warm best-effort and the readout says so.
Every guard lives in one pure rulebook: the opt-in (an agent-spawned session does not inherit the app default), a launch that reports cache state, a warm 1h cache with enough tokens at stake and no compaction this gap, a live pane, no usage-limit pause, no respawn, Ralph, task or waiting agent, idle, no open dialog, an empty composer and no recent keystroke. The nudge is a submit and moves lastSubmitAt, which the response viewer's conversation correlation needs; the cap counts from its own persisted lastRealPromptAt instead. Read My Mind drops the exact nudge text, and the turn's stop hook and idle prompt open pre-acknowledged so nothing alerts. The last cache report and the clock survive a restart, so the timer re-arms.
GitHub Copilot CLI (`copilot`) becomes a run mode: Run menu, welcome
screen, cron and CLI management once it is installed, tmux-backed like
the other agent CLIs, working/idle and the model read off its footer,
launch options through `copilotConfig` (model, resume, continue, the
multi-user-clamped allowAll), Custom Model Endpoints via Copilot's BYOK
variables, MCP sync of its mcp-config.json, a status probe, and the
`codeman agent` verbs (spawn waits for its composer, read returns its
last answer).
The plan-usage quota row that earlier rounds carried was split out on
review and is not part of this merge.
Merge-time commits on top: the wider COPILOT_* clamp and the zh-CN
README rows (maintainer), the Docker sign-in docs, divider rows inside
an answer kept by `agent read`, route tests for the screen-read
last-response branch, and doc drift (Past Sessions, wheelForward JSDoc,
COPILOT_/OMP_ in the env prefix lists).
Verified before merge on Copilot CLI 1.0.98: injected keystrokes,
bracketed paste and Enter reach the TUI in tmux (github/copilot-cli#4180
does not reproduce), a shell tool call completes inside tmux (#4223 does
not reproduce), and a session driven through this branch answered over
send-and-wait.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
docs/api-reference.md (the signal notes and the idle/working rows), and the
wiki's Notifications-And-Approvals, Keeping-Agents-Running and Troubleshooting
pages, plus docs/grok-integration.md, still called Antigravity's working and
idle status unreliable. It now declares a working line and prompt marker like
Codex, OpenCode, Gemini, Pi and OMP, so only Grok stays on generic cues. The
Troubleshooting entry for a session stuck showing busy also says that an
Antigravity session waiting on a shell-command approval shows busy until it is
answered, and the API reference says the same of its idle signal.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
docs/api-reference.md and the case-path.ts @fileoverview still said a custom
folder must not be, or be inside, the cases directory. After #567 only the
cases directory itself and its direct children are refused (those are what
GET /api/cases lists as local cases); a folder further down is allowed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- New docs/copilot-integration.md in the shape of the other CLI guides: install and identity
probe, authentication (keychain vs plain-text config.json, COPILOT_GITHUB_TOKEN), what Codeman
wires up (Run button --yolo and its clamp, model, resume, continue, --name rule), BYOK custom
endpoints, terminal behaviour (drag selection, wheel and touch), the codeman agent verbs
(ready mark, read), plan usage, Docker, Remote SSH, what is deliberately not wired, known gaps.
- Agent-CLIs wiki: the eleven-modes table, a GitHub Copilot CLI section, the env prefix row, the
feature-comparison rows and the status endpoint list.
- README, Home, FAQ, Core Concepts, Docker Cases, Remote SSH, Contributing, The Dashboard and
Custom Model Endpoints: mode lists and counts; CLAUDE.md: stack line, SessionMode, prefixes,
resolver list, external-CLI notes and the plan-usage source; api-reference MCP target wording;
the env allowlist error message names COPILOT_*.
Follow-up to the previous commit, after a fact check against the code.
- Answer surfaces: the header bell answers Claude prompts, the phone
strip only Claude dialogs (and only with the inbox on), and push
Approve/Deny only a Claude permission prompt (PUSH_EVENT_MAP gives
actions to permission_prompt alone). README, its Chinese mirror, the
notifications page and the phone guide now say so.
- Antigravity and Grok Build: after the 3 s launch settle, idle is armed
only by Claude's prompt marker and working only by a braille spinner,
so "idle when output stops changing" was wrong. The wiki, the grok
guide and the API reference now call their status unreliable.
- DeepSeek Harness: its idle and working reports become stop and
agent_working, which drive respawn, waits and the inbox but not the
session's own working/idle display. Keeping Agents Running says that,
and that the respawn path needs the status bridge.
- The wait section of the API reference no longer calls exit the only
dependable signal for screen-checked modes; the inbox page names how
Codex and DeepSeek items clear; Core Concepts and Hooks And
Integrations no longer call DeepSeek "the one" exception; Agent CLIs
notes that Codex dialogs still raise the red alert; the inbox design
doc notes the alert-only items.
- Skill: stop and blocked list deepseek, and SKILL.md no longer says
codex has neither a transcript nor blocked. Mirrored with
scripts/sync-plugin.mjs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The README (and its Chinese mirror) said the Approvals Inbox queues every
pending prompt and answers it from the bell or the phone. It holds prompts
from Claude Code, Codex (screen-read) and DeepSeek Harness only, and only
Claude's are answerable: Codex and DeepSeek items are alerts that say to
answer in the terminal, with no Approve/Deny on the push or the phone strip.
The wiki, the TUI guide and the phone guide now say the same.
Keeping Agents Running, Troubleshooting and the API reference still said
every CLI but Claude, Codex and DeepSeek falls back to output
stabilization. OpenCode, Gemini CLI, Pi and OMP declare
capabilities.workDetect too and get the same screen check; only
Antigravity and Grok Build declare none. Core Concepts now mentions
Codex's screen-read dialogs, and the respawn gotcha notes that DeepSeek's
own end-of-turn report reaches the respawn controller.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An Excel or Notepad CSV/TXT export (UTF-16 with a BOM, or Windows-1252) was refused as "File bytes do not match declared type", which reads like a corrupt file. Name the encoding and tell the user to save it as UTF-8.
- docs/api-reference.md: a non-admin's GET /api/settings omits
voiceSettings.apiKey, caseOrder and lastUsedCase; a new "System
operations" table for the admin-only routes and the scoped
POST /api/auth/revoke; the error-code table now lists FORBIDDEN and the
other multi-user codes (PASSWORD_CHANGE_REQUIRED, USER_NOT_FOUND,
USER_EXISTS, LAST_ADMIN).
- docs/wiki/Multi-User-Mode.md: what a regular user reads, that their run
mode and respawn presets stay theirs on the device, the slow sign-in
case, and the admin-only system operations.
- docs/multi-user-plan.md: Settings and System ops rows marked implemented.
- CLAUDE.md: the Multi-user mode paragraph names the new pieces and tests.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
api-reference gains a Settings section (GET/PUT /api/settings, the model
config, the case order and PUT /api/config, with the 403 FORBIDDEN a non-admin
gets in multi-user mode). The Multi-User Mode wiki page explains what a regular
user's App Settings save does now, Settings-Reference links it, the plan's
Settings row is marked implemented, and CLAUDE.md notes the gate for the
Multi-user paragraph and for anyone adding a settings write.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
feat(codex): raise codex approval, question and trust dialogs as BLOCKED
Conflict resolved against #634 in src/session.ts _probePaneWorking():
#624's assignment (a dialog on screen is never work) is kept, and #634's
trust-dialog verdict block (log the hold once, remember the reading)
follows it, before _readWatching().
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Docker rule was applied to the CASE folder and its common git dir
only. A Docker case can be linked to any host folder, including a managed
worktree (`<repo>/.claude/worktrees/<name>`), which is a natural setup for
running one of the parallel agents in a container. Removing that worktree
from the local case's dialog, or through Close Session's "Kill & remove
worktree", ran `git worktree remove`, which runs a git status INSIDE the
tree (container-written files, checkout filters on this machine) and then
deletes the whole tree, ignored files included, while the container still
mounts it. Reproduced on an isolated instance: DELETE answered 200 and the
Docker case's workspace was gone.
That contradicts the invariant the PR itself documents in CLAUDE.md ("git
never runs ... at or inside a Docker workspace"). removeCaseWorktree now
refuses (400) a present worktree that is, sits inside, or holds a Docker
case workspace, before any git runs; the DELETE route passes the Docker
roots it already reads for the case check. A worktree whose folder is gone
is unaffected (git only drops its record there). Unit and route tests
cover both directions and an unrelated Docker workspace; docs updated.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The dialog's own prompt glyph armed idle confirmation and the quiet dialog passed it, so a fresh case reported idle about 4 s in. An agent that waited for idle and then prompted typed into the dialog, and its Enter confirmed No, exit and killed the pane.
With Codeman Agent Skill on (agentSkillEnabled), every session create
writes the skill into the folder the session runs in, so a session in a
worktree leaves an untracked .claude/skills/codeman/ (claude) or
.agents/skills/codeman/ (codex, gemini and the rest) behind. git then
refuses `git worktree remove` for that worktree forever, and an agent
running `git add -A` there would commit Codeman's skill into its branch
(reproduced: the worktree's status showed "?? .agents/" and
"?? .claude/").
A create now excludes <skills dir>/codeman/ next to the hooks file, for
every skills folder the registry names (capabilities.agentSkillDir,
read at call time by the route and passed in as data, so no CLI id is
branched on). Like the other lines it is only added when git does not
already ignore the path, and only to the repository's local
info/exclude.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
When a managed worktree's folder is deleted by hand (a user in a file
manager, an agent's rm -rf), git keeps its record and lists it as
prunable. Codeman then had no way out: the dialog showed the row as
"missing" with no action, DELETE answered "No worktree named ...", and
the name could never be used again (the branch still existed, and with
another branch git refused "a missing but already registered
worktree"). Reproduced on git 2.43; git's own `git worktree remove` on
the missing path drops the record with exit 0.
Removal (only removal, never a session start) now accepts a worktree
whose folder is gone when git lists it at exactly the managed path, as
prunable or locked, and no component on the way is a symlink or a file.
The live-session and lock refusals still apply. The dialog offers
Remove... (not Open) on such a row, with a note saying what it does.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Document what the two previous commits changed for users and for whoever
adds the field to another CLI:
- docs/cli-registry.md: the `blockedLine`/`blockedLines` fields, how codex's
pattern was measured, and the three rules any declaring CLI keeps (end on
chrome only the CLI draws, alert only; raise on one reading, clear on two;
hooks win).
- docs/architecture-invariants.md: a "Screen-read blocked dialogs (codex)"
entry, plus the wait-signal, idle-detection, watching and Approvals Inbox
entries it changes.
- docs/api-reference.md, docs/extending-codeman.md and the wiki (Agent CLIs,
Notifications and Approvals, Hooks, HTTP API, Driving Codeman From An
Agent): `blocked` now fires for codex, `stop` still does not, codex
approvals are alert-only cards answered in the terminal.
- CLAUDE.md: `stop` and `blocked` are no longer one rule, the config-regex
list gains `blockedLine`, and a short pointer that a codex dialog match is
only ever an alert.
- The codeman skill's signal table and verbs note, mirrored into
plugins/codeman by scripts/sync-plugin.mjs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Documents the worktree endpoints and quick-start's worktree field in
docs/api-reference.md, adds a Git Worktrees page to the wiki (sidebar,
Home index, a pointer from Core Concepts where sessions sharing one
case folder is explained), and records the rules that keep the feature
safe in docs/architecture-invariants.md with a short CLAUDE.md pointer:
only the managed .claude/worktrees path is ever touched, git never runs
over a Docker workspace, removal is never forced and branch delete is
-d only, and sessions start through the existing create paths.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Attach button, the Compose and paste-dialog pickers, terminal drop and the
clipboard now take documents beside images and videos: the office formats
pdf/docx/pptx/xlsx/zip and the text family txt/md/csv/tsv/json/log/yaml/yml/xml.
A document is admitted by its name's extension (the MIME a phone attaches to a
.md is anyone's guess), buffered under the same 50MB image cap, and judged on
its bytes by the same fail-closed sniffer: a magic-number signature for the
binary formats, UTF-8 with no NUL byte for text. It is saved under a sanitized
stem of its name, so Q3 report.pdf is findable as paste-<ts>-<hex>-Q3-report.pdf.
sh/py/js/html are refused by name with a clear 400. That is a scope choice, not
a security property: file-raw already serves non-media text inert, so this keeps
the server from storing what it would serve or an agent could run, and html and
svg are the ones deliberately kept out. One client classifier (_promptAttachKind)
now returns image, video or document, and the server's dispatch mirrors it: an
image MIME wins whatever the name says, a document extension takes the document
branch, and a foreign extension with no image MIME is refused only after the
image sniff fails, so nothing the image path accepted by its bytes is lost.
#604 makes `~/` links clickable and passes them through unchanged, since only
the server knows the session host's home. The html-view mint read `~/x.html`
as workspace-relative and answered 404, so the preview fell back to the
source view. It now expands `~/` against this host's home, as the attachment
route does, and refuses it in a Docker case (that `~` is the container's)
with the same message as the attachment and folder routes.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts resolved against #604, #606 and #601:
- constants.js: the rooted link pattern takes html-md's `markdown` and
`html?` with #606's m4v/ogv; #604's relative pattern gets the same list
(link-provider-regex pins the two equal); #604's findFilePathLinks /
folder helpers and html-md's rendersAsPage() are both kept, and
window.CodemanFilePaths exports all of them.
- terminal-ui.js: #604's resolved `target` (relative, ~/ and folder links)
now also goes through rendersAsPage(), so every link kind routes .html to
the page preview; .md routes there through FILE_PREVIEW_EXTENSIONS.
- CLAUDE.md, api-reference, architecture-invariants: both sides' text kept.
- test/folder-grid-ui.test.ts (#604) stubs rendersAsPage() like the other
panels-ui harnesses.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
