It does match one Claude shows inline when the first line has 24+
non-space characters; it misses a short first line and the
[Pasted text #N +k lines] placeholder. Say "cannot reliably" instead of
"cannot".
Co-Authored-By: Christian Haberl <116439789+christianhaberl@users.noreply.github.com>
Co-Authored-By: Claude <noreply@anthropic.com>
"\nfix it\r" pasted an empty first line. Leading line breaks are now
dropped like trailing ones. Document what useMux does with a line feed,
and that a pane without bracketed paste receives each pasted line break
as CR, so a multi-line write without \r runs every line but the last
there, where the old line-stripping typed the joined text and ran nothing.
Co-Authored-By: Christian Haberl <116439789+christianhaberl@users.noreply.github.com>
Co-Authored-By: Claude <noreply@anthropic.com>
Review follow-up. Other bounds assume a small session count: an owner's
tab layout holds at most MAX_TAB_REFS (512) refs and PUT
/api/session-order accepts at most 500 ids, so with
CODEMAN_MAX_SESSIONS=600 the 513th session creation answered HTTP 500
instead of the capacity message. The value is now clamped to a named
MAX_CONCURRENT_SESSIONS_CEILING of 500; any digit string above it
(including one past the safe-integer range) resolves to 500 instead of
falling back to 50. The resolver reads process.env directly, the unused
env parameter is gone.
Docs: a CODEMAN_MAX_SESSIONS row in the Settings Reference environment
table, the env name next to the cap in the cron guide and the
architecture invariants, and both copies of the skill's endpoints
reference now give the per-user cap as half the global cap (25 by
default). The changeset says "1 to 500". The test drops the
`as unknown as string` casts and adds '1000', '501' and an
out-of-range value, each refusing at 500.
Co-Authored-By: Christian Haberl <116439789+christianhaberl@users.noreply.github.com>
Co-Authored-By: Claude <noreply@anthropic.com>
The first commit left the old rule standing in places: the gotchas list in
extending-codeman.md still said newlines were stripped and that
"echo A\necho B\r" ran `echo Aecho B`, and so did both READMEs and the
skill's big-input section. Those now describe the paste.
Newlines are only kept on the mux path, so the docs that describe the paste
say "with useMux": without it a multi-line body is not a plain prompt and is
written straight into the pane.
Cron keeps rejecting multi-line prompts, but its docs and the code comments
in cron-service.ts, schemas.ts and respawn-controller.ts gave a reason this
change removes (writeViaMux joining lines, a newline submitting in Ink). The
reason that remains is the submit check, which cannot recognise a
multi-line paste in the composer, and for cron's paste mode the newlines
reaching the CLI as keys.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
TmuxManager.sendInput() removed every `\n` before the text reached tmux, so a
multi-line prompt sent with `useMux` (or a multi-line respawn prompt) arrived as
one line with its lines run together: `"echo A\necho B\r"` ran `echo Aecho B`.
The text half of a submit has gone in as one bracketed paste
(buildPasteTextCommands) since the Codex paste-burst fix, and inside the paste
markers Claude Code and Codex insert a pasted line break into the composer
instead of submitting. So the `\n` is now kept (`\r\n` loses only its `\r`) and
the existing paste carries the lines; the Enter stays a separate tmux call.
Multi-line text without an Enter is pasted too rather than typed with
`send-keys -l`, where every line break would reach the pane as a key.
Single-line input is unchanged.
The test-mode gate moves from the top of sendInput() into inputRunner(), as
readPaneRows() does, so a test subclass can record the commands sendInput()
would run instead of pinning the branch shapes on the source.
SubmitVerifier still compares the composer's last glyph line with the prompt
minus its newlines, so it does not reliably recognise a multi-line paste and
may not re-press an Enter that Claude Code ignored. `agent send` and the TUI
therefore keep refusing or joining multi-line input; the docs that described
the stripping now describe the paste and that limit.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The cap of 50 concurrent sessions was a hard-coded constant, so a machine
with the memory for more (or a small box that wants fewer) had to patch the
source. CODEMAN_MAX_SESSIONS now sets it at startup. The default stays 50,
and anything that is not a positive integer (empty, 0, negative, fractional,
1e3, out of safe-integer range) falls back to it, so a typo never locks
session creation.
Every site keeps reading MAX_CONCURRENT_SESSIONS, so the session routes,
cron launches, the scheduled-run loop and the multi-user per-user cap (half
the global cap unless CODEMAN_MAX_SESSIONS_PER_USER is set) all follow the
variable. The test goes through sessionCapacityState and
sessionCapacityMessage, the check every session-creating route uses.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Review round 3 on #661: retention aged each snapshot by its own createdAt, so the first change after a quiet month deleted the last good copy; it now ages from when the next snapshot was made. users.json lastLoginAt, settings.json lastUsedCase and intents.json recentPrompts/updatedAt are volatile keys for the change check. The keep count has a minimum of 2. Wiki restore paragraph aligned with RESTART_REQUIRED.
Review round 2 on #661: the hostname in the origin orphaned every snapshot when a Docker container was recreated, so the origin is a random id kept in <data dir>/config-backup-id; after restoring settings.json the Settings form is re-read from /api/settings so Save cannot write the old values back; the restore confirm names the files and the credential ones; clis.json is reloaded (reloadCliRegistry) and users.json needs no restart; API reference and route docs corrected.
Review round on #661: webhook.json and intents.json are redacted in compare and URL values lose userinfo/query; a custom folder is probed (bounded, pastCap) before each pass and in each route and only created when its parent exists; manifests record an origin and change check, prune, list, restore and diff are scoped to it; a restore reloads IntentStore, lists untouched files and treats settings.json as restart-required; remote-cases.json is tracked; stale .tmp-cfg-* folders are swept and a failed restore unlinks its temp; the group is hidden from non-admins; an empty days field saves 30.
Settings -> System -> Config backups gains a Compare view: a backup against the
running config, a backup against the one before it, or any two backups. Each
differing file lists its changed keys as before/after, plus files that appeared
or vanished. GET /api/config-backups/diff?from=&to= serves it (`to` defaults to
`current`; admin only in multi-user mode).
Credential values are never returned: .env, users.json and push-keys.json report
names only, and any other key that looks like a token, secret, password,
credential or key is reported as changed without its value. A non-JSON file
reports only that it differs, a file is cut at 200 changes, and a self-refreshed
discovery timestamp does not count as a difference.
custom-model-hosts.json carries a lastDiscoveredAt per host that the 5-minute model
discovery poll rewrites, so the content hash never matched the latest snapshot and a
snapshot was written every tick. At the default keep count of 20 that left about 100
minutes of history and evicted every useful older copy.
The change check now looks through volatile keys per tracked file. The snapshot still
stores the file as written and restore still verifies against its own digest.
- New wiki page Config-Backups: what is backed up (and what is not, and why), when a backup is made,
where and under what name (cfg-YYYYMMDD-HHMMSS, manifest.json, reasons), retention and its
guarantees, the Settings controls, restore (verify, pre-restore copy, atomic write, which files
need a restart), security, the HTTP API and troubleshooting.
- Linked from the Home index and sidebar; Settings Reference, Troubleshooting ("my settings were
reset"), Security and Core Concepts updated; README and CLAUDE.md entries; the api-reference
section now states the naming convention and the full tracked list.
- Found while documenting: remote-hosts.json, docker-hosts.json, docker-cases.json and
webviews.json are user configuration too and were not tracked; they are now. state.json stays
out on purpose (rewritten per session event, also holds cron jobs and respawn presets) and the
docs say so.
The files that hold a user's customization (settings.json, clis.json, custom-model-hosts.json,
webhook.json, intents.json, linked-cases.json, push-keys.json, users.json, .env) are plain JSON
in the data dir, rewritten by the server, the Settings UI and the CLI, with no copy to go back to.
A snapshot is taken at startup and whenever the tracked files' content changes (checked every
five minutes, and only written when a digest of the file set differs from the latest snapshot's),
into `<data dir>/backups/config` by default or any absolute folder. Retention keeps the newest
configBackupKeepCount (1-500) and, when configBackupKeepDays > 0, drops older ones; it only ever
deletes folders it made (name pattern and a parseable manifest) and never the newest.
GET/POST /api/config-backups list and back up now; POST .../:id/restore verifies every file against
the manifest's SHA-256, takes a pre-restore snapshot, then replaces files atomically with mode
0600, writing only allowlisted names. Snapshots are 0700 folders of 0600 files and all routes are
admin only in multi-user mode. Settings -> System gets the controls and a Restore list.
Claude Code draws its prompt suggestion in an empty composer, the first letter in the reverse-video cursor cell and the rest faint, so a plain capture read it as typed text and keep-warm never nudged those sessions. The keep-warm pane read now uses capture-pane -e and drops the suggestion before checking the composer.
Also from review: an off status carries no window, automation and an unreadable composer retry instead of stopping, a failed evaluation re-arms a retry, a trigger during an evaluation queues one follow-up that remove() cancels, and the cap's clock is seeded from lastSubmitAt for pre-upgrade state.
Only a human spends an idle alert, but the keep-alive turn resolved an unseen one three ways: its working transition, its stop hook, and its own idle prompt replacing the item with a pre-acknowledged one. While the turn runs, a pending idle item is now left exactly as found, the page's stop handler returns on the keep-alive reason before clearing hooks or raising Response Complete, and session:working/session:idle carry keepAlive so the stuck-detection timer neither restarts nor re-arms.
The window that marks the turn closes on its own idle prompt or any other submit instead of a fixed three minutes, which a slow turn's idle prompt (sent a minute after the turn ends) could outlast. The service keeps the default and cap in memory, read through a strict reader so a mid-write read is retried rather than kept, and the cap is clamped before the strict settings save.
Claude Code lets a subscription's one-hour prompt cache expire after an hour idle, and the first turn back re-writes the whole conversation at the cache-write rate; nearly every gap over an hour goes cold, while the saving is concentrated in gaps of one to four hours. Codeman now sends one short keep-alive turn five minutes before the expiry Claude Code reports on its statusline, so the next real prompt still reads the conversation from cache, and stops two hours (configurable) after the last real prompt.
Codeman owns the idle policy for these sessions, as agreed in Discussion #554: a launch with keep-warm on also carries idleCompaction: false in its one --settings JSON, so Claude Code's own idle compaction cannot replace the conversation with a summary a minute before the nudge. It is decided once per launch (keep-warm on, the statusLine exporter injected, Claude Code 2.1.290 or newer, an unknown version fails closed like --name), recorded on the mux record, and picked up by any relaunch; a launch with keep-warm off is byte-identical. A session switched on after launch is kept warm best-effort and the readout says so.
Every guard lives in one pure rulebook: the opt-in (an agent-spawned session does not inherit the app default), a launch that reports cache state, a warm 1h cache with enough tokens at stake and no compaction this gap, a live pane, no usage-limit pause, no respawn, Ralph, task or waiting agent, idle, no open dialog, an empty composer and no recent keystroke. The nudge is a submit and moves lastSubmitAt, which the response viewer's conversation correlation needs; the cap counts from its own persisted lastRealPromptAt instead. Read My Mind drops the exact nudge text, and the turn's stop hook and idle prompt open pre-acknowledged so nothing alerts. The last cache report and the clock survive a restart, so the timer re-arms.
Codex cites files as [label](/abs/path). The chat view gave those links target=_blank, so a click opened <origin>/abs/path and landed on a Fastify 404. Path-shaped hrefs now take the linkified-path shape the file preview already opens; scheme, protocol-relative and fragment links are unchanged.
Resolve Copilot forwarding and registry/documentation overlaps against upstream e63bb65b. Reuse upstream always policy for measured version-independent forwarders and test slow clicks for Claude, Codex and Copilot.
Under 600px the window stays full screen whatever Expand or a drag says, and both
controls are hidden. Stepping onto a folder-grid entry goes through the grid so its
index follows. Alt+left/right is swallowed at the ends of the list too. Adds tests
for the key handler, the grip clamp and the history/grid case, zh-CN titles and wiki lines.
Address the remaining PR #645 review: preserve shell Ctrl/sideways local scrolling, restore the paging threshold export, document tile leading-report lifetime, and update internal and user scrolling documentation.
Refs: https://github.com/johoja12/Codeman/issues/7
The message ran 66 words over five sentences, which pushed the update
toast's buttons off a 360x640 phone. It also repeated the card's own
eyebrow ("Security notice for OpenCode users:"), placed the breached
"legacy system" inside the Console (no source says so), and closed with
an unsourced line about the CLI not being affected. The new text (55
words) says what OpenCode said, including its own reassurance that a
user who got no email was not affected, which matters because the card
goes to every opencode user while about 1.4% of Console users were hit.
The zh-CN text follows it and uses 撤销 for revoking keys.
published moves to 2026-10-17, so the notice is already live in every
timezone when the release lands: a browser still on the 17th would
otherwise take the plain update toast and get the notice later as a
separate card. docs/releasing.md says both things for the next notice.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
src/web/CLAUDE.md gets the load-bearing rules (hand-maintained file,
strictly-true availability, one surface per notice per load, seen only
on a user action, no CLI-id branching, theme tokens only), and
docs/releasing.md a section on adding a notice, its fields, and letting
`expires` retire it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
GitHub Copilot CLI (`copilot`) becomes a run mode: Run menu, welcome
screen, cron and CLI management once it is installed, tmux-backed like
the other agent CLIs, working/idle and the model read off its footer,
launch options through `copilotConfig` (model, resume, continue, the
multi-user-clamped allowAll), Custom Model Endpoints via Copilot's BYOK
variables, MCP sync of its mcp-config.json, a status probe, and the
`codeman agent` verbs (spawn waits for its composer, read returns its
last answer).
The plan-usage quota row that earlier rounds carried was split out on
review and is not part of this merge.
Merge-time commits on top: the wider COPILOT_* clamp and the zh-CN
README rows (maintainer), the Docker sign-in docs, divider rows inside
an answer kept by `agent read`, route tests for the screen-read
last-response branch, and doc drift (Past Sessions, wheelForward JSDoc,
COPILOT_/OMP_ in the env prefix lists).
Verified before merge on Copilot CLI 1.0.98: injected keystrokes,
bracketed paste and Enter reach the TUI in tmux (github/copilot-cli#4180
does not reproduce), a shell tool call completes inside tmux (#4223 does
not reproduce), and a session driven through this branch answered over
send-and-wait.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
docs/api-reference.md (the signal notes and the idle/working rows), and the
wiki's Notifications-And-Approvals, Keeping-Agents-Running and Troubleshooting
pages, plus docs/grok-integration.md, still called Antigravity's working and
idle status unreliable. It now declares a working line and prompt marker like
Codex, OpenCode, Gemini, Pi and OMP, so only Grok stays on generic cues. The
Troubleshooting entry for a session stuck showing busy also says that an
Antigravity session waiting on a shell-command approval shows busy until it is
answered, and the API reference says the same of its idle signal.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The new App Settings row had no zh-CN entry, so it read in English in a
Chinese UI, and docs/wiki/Settings-Reference.md did not list it. Adds the
label and description to i18n.js, a row in the Agents & CLIs table, and a
JSDOM test that runs the real translator over the real index.html.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- docs/cli-registry.md said Session history resume goes through
copilotConfig.resumeSessionId / continueSession. Past Sessions sends only
`continueSession: true` (terminal-ui.js, the modeConfigKey table);
resumeSessionId is for API callers.
- The wheelForward JSDoc in cli-registry/types.ts read as if the value had
effect. Nothing reads it (it is in the DECLARED-FOR-LATER list); the
browser gate is _shouldForwardWheelToApp in terminal-ui.js with its own
per-CLI rules, which the comment now says.
- The env-prefix lists in the CLAUDE.md Security table and the
allowedEnvPrefixes() comment in schemas.ts stopped at DEEPSEEK_, missing
both OMP_ and the new COPILOT_; the Multi-CLI prefix rule missed OMP_.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The suffix is part of the pill's text line, which the Tiles style hides (it
shows WS live) and phones hide too, so the page promised a suffix some users
never see.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The reflow around the new UTF-8 sentence left one 120-character line; the
paragraph is wrapped at about 90 columns like the rest of the page.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
docs/api-reference.md and the case-path.ts @fileoverview still said a custom
folder must not be, or be inside, the cases directory. After #567 only the
cases directory itself and its direct children are refused (those are what
GET /api/cases lists as local cases); a folder further down is allowed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
CLAUDE.md (Prompt uploads) and architecture-invariants still named
_promptAttachKind() as the filter every surface reads. That stays true, but
the surfaces now admit through _admitPromptAttachments(), which is what says
how many files a pick skipped. A new surface that filtered on the classifier
directly would drop files silently.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Both Docker sections said "or set COPILOT_GITHUB_TOKEN for the session",
which cannot work: a docker quick-start refuses envOverrides
(session-routes.ts), and Copilot's dockerExecEnvNames is empty, so a token
in the server environment is not forwarded into the container either. The
sentence now says to sign in inside the container and why the token route
does not exist.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The COPILOT_ prefix admits every variable Copilot reads, and the 1.0.98
bundle reads far more than `copilot help environment` lists. Only
COPILOT_HOME, COPILOT_ALLOW_ALL and the BYOK trio were privileged, so a
non-granted multi-user owner could still hand back what the allowAll
clamp removed:
- approval: COPILOT_PLAN_THEN_AUTOPILOT, COPILOT_ASSISTED_APPROVAL
- code with no approval row: COPILOT_CLI_DIST_DIR runs <dir>/index.js
in place of the CLI, the package caches choose the CLI build,
COPILOT_EDITOR, COPILOT_PROVIDER_API_KEY_COMMAND and
COPILOT_AHP_HOST_BIN are executed, skills, provider configs and hooks
are loaded from the named places (the DSH_HOME class)
- token redirects: COPILOT_API_URL and the other API bases receive the
CLI's sign-in token, which in multi-user mode is the operator's (all
users share the OS account and ~/.copilot), and the rest of the BYOK
provider family re-aims a Codeman custom endpoint (the
DEEPSEEK_BASE_URL / OMP_AUTH_BROKER_URL class)
All are now privilegedEnvKeys. The registry schema capped that list at 8;
the cap is now 48, since a longer deny list only takes more away from
non-granted owners. The test sends one of each class through the real
schema (they all pass it) and the real clamp. The docs say the list is
read from the 1.0.98 bundle and that a variable a later release adds is
not covered until it is listed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Add pinCliSessionName (synced, default OFF), re-read at each spawn and respawn.
Off keeps the #457 behaviour; on pins every non-blank tab name as --name.
Update the docs, JSDoc and changeset that stated the old rule.
The Remote SSH section claimed the same flags and clamp as a local launch, but defaultRemoteCommandForMode starts a bare copilot (pinned in test/location-overlay-commands.test.ts). Nothing in the UI sets copilotConfig.model, so the model rows now say API callers, or COPILOT_MODEL for a custom endpoint.
