- hooks-config: a probe the bulk cap refused gets ONE bounded re-probe past the
cap (probeBeforeTouching), and whatever is still unknown is skipped. The
per-spawn hook and statusLine helpers used to fall back to an unbounded
lstat/readFile there, which on a dead workspace never settled and could take
the last threadpool workers (and hang the boot hook sweep). New test: cap
engaged, stat/lstat/readFile hanging on two more paths; both helpers return.
- describeUnknownPath()/unknownPathReason(): POST /api/sessions, quick-start and
GET /api/cases/:name now say a folder was not checked (other mounts are still
not answering) instead of blaming a healthy folder at the stall ceiling.
errorCodes unchanged.
- #535 x #516: Create in a custom folder probes the parent through the bounded
probe before realpath/stat/lstat/readdir touch it; an unknown parent is 422
OPERATION_FAILED (UNREACHABLE) within the probe timeout. New test.
- Docs: MAX_STALLED default is 2 (follows UV_THREADPOOL_SIZE), CaseInfo
.unreachable covers a refused probe, the boot sweep skips an unanswering
workspace, a CLAUDE.md gotcha for bounded probes, verbs.md documents the 422
(plugin mirror synced), api-reference documents the custom-folder 422.
- Tests: the launcher case-lookup describe is no longer nested in the Grok
block, and the cap-below-ceiling test no longer depends on an inherited
UV_THREADPOOL_SIZE / CODEMAN_PATH_PROBE_MAX_STALLED.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A cached list of repositories below a folder is re-checked against the
Docker case workspaces as they are now, so a repository linked as a Docker
workspace within the 30 s list cache is no longer inspected.
- A diff past runGit's 8 MB output bound is cut short from git's partial
output instead of failing with a 500.
- The browser test waits for its slow route handler on unroute
(unrouteAll behavior 'wait'), so a late route.continue() cannot fail the run.
- "Upstream is gone" now reads "Upstream not on remote", true for a branch
that was never pushed as well as one deleted on the remote; docs mirrored.
- The diff route checks the repository against the workspace's own cached
repository list (findWorkspaceRepo) and refreshes only that repository,
instead of a fresh status of every repository in the folder.
- CLAUDE.md: a Key Patterns entry for the git read surface and its rules.
- The enclosing repository is identified with one cached rev-parse before
any full status, so an unrelated repository above the workspace costs one
process and its failure no longer hides the repositories below.
- Wiki: the bottom-bar indicator moves out of the header-controls table.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Route test hygiene: each test works in its own mkdtemp folder, every
deletion goes through safeRmHomeTree, and the suite refuses to start
outside test/setup.ts's temp HOME, so a raw `npx vitest` can no longer
delete a real ~/projects or the live linked-cases registry.
- Path policy: the symlink-resolved target is also judged against the
resolved home, data dir and system roots (home reached through a link,
macOS /etc -> /private/etc); test expectations are realpath-safe.
- Refuse a target equal to or inside the caller's or the shared cases
directory, pointing at plain Create New (it would list twice, and
deleting the local copy removes files).
- The registry re-read comment no longer claims to prevent the
lost-update race; documented as narrowing it, like /api/cases/link.
- UI: the success toast names the folder the server created, the
"under ~/codeman-cases" blurb and name hint change while a custom
folder is ticked, a "/" parent previews and sends /<name> instead of
an empty path, and the new labels have zh-CN entries.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
fix(cases): bound path probes for linked workspaces and session creation, so an unreachable mount cannot freeze the server
# Conflicts:
# src/web/routes/case-routes.ts
feat(ui): git status indicator in the bottom bar, with a panel of uncommitted and unpushed work
# Conflicts:
# config/test-suites.ts
# docs/api-reference.md
- applyWorkspaceHooks: an "unknown" probe that is not near a stalled path
(refused by the stall cap, or an unexpected stat error) no longer reads as
"go ahead". It checks existence with pathExistsForWrite first, so a deleted
workspace is not recreated by the mkdir -p in ensureCodemanHooks.
- pastCap gets a hard ceiling, PATH_PROBE_STALL_CEILING = UV_THREADPOOL_SIZE
(default 4) minus one, so explicit requests against several dead paths can
never take the last libuv worker. The bulk cap now defaults to one below the
ceiling (2 with the default pool), leaving a slot for an explicit request.
- A stall widens to its mount only for network and FUSE filesystem types read
from /proc/self/mounts; on a local mount (a path typed under a local /home
that reaches a NAS through a symlink) it narrows to the stalled path.
- GET /api/cases/:name probes CLAUDE.md with pastCap, like the folder probe.
- Comment in config/path-probe.ts describes the mount-scoped stall.
- never inspect a repository at or inside a Docker case workspace (walk-up, scan, diff route): git would run its clean filters on the host
- a branch whose upstream was deleted and pruned reports upstreamGone and falls back to commits on no remote, instead of green
- turning the setting off during a poll releases the in-flight flag
- log.showSignature=false; reword the docs: clean filters still run
- CLAUDE.md frontend load order, changeset names git-diff
- discovery reads a bounded, sorted directory listing; leading-dash paths allowed; diff 500 redacts credentials
- keyboard focus survives the poll re-render; panel stays on screen on narrow viewports; aria-expanded visible on light skins
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
Rows open an in-panel diff (staged, not staged, untracked as additions, deleted as removals) via GET /api/sessions/:id/git-diff, with Back and Open file. The route matches repo and path against the current status, runs git diff read-only (--no-ext-diff --no-textconv), and caps output at 400 KB.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
- doctor probes each CLI's discovery.searchDirs when which misses and runs --version on the resolved path, so a service with a minimal PATH no longer reports installed CLIs as missing
- GET /api/doctor shares one in-flight run per category
- Diagnostics group hidden from non-admins in multi-user mode (_applyDoctorAdminGate)
- 500 uses INTERNAL_ERROR; a killed child reports 'timed out after 30 s'
- browser test blocks service workers so page.route() is reliable
- wiki: Diagnostics sentence
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
The bounded path probe answered "absent" both when a path did not exist and
when it simply did not answer, so a stalled linked case 404'd and the Run
button scaffolded a stray local case over it, and two stalled paths anywhere
made every unrelated path read as absent (hooks skipped, statusLine
overridden, the clone warning lost).
- probePath()/probePathKind() are tri-state: present (or directory/file),
absent (ENOENT/ENOTDIR only) and unknown (timeout, other errors, refusal).
boundedPathExists() stays as the display-only boolean.
- A stalled path takes only its own mount out of probing (deepest mount
point from /proc/self/mounts, never /; just the path itself when there is
no mount table). Unrelated paths keep probing. The process-wide cap is a
backstop that answers unknown, and a single-path user request can probe
past it ({ pastCap: true }), still bounded and still recorded as stalled.
One console.warn when a path first stalls and one when the cap engages.
- GET /api/cases/:name keeps NOT_FOUND for definite absence only. An
unreachable linked case answers with its registered path and
unreachable: true; a local one answers OPERATION_FAILED. runClaude and
runShell create a case only on errorCode NOT_FOUND. The case list keeps an
unreachable linked case, marked unreachable, instead of dropping it, and
fix-plan reports an unreadable plan as an error, not "no plan".
- applyWorkspaceHooks and the statusLine helpers skip only a workspace that
is absent or on the stalled mount; a capacity refusal no longer stops
hooks being installed elsewhere, and an unreadable settings file never
lets the exporter override a user's own statusLine.
- The clone flow's repo-settings warning is back on its synchronous check,
and stripCaseEnvKeys uses pathExistsForWrite.
- POST /api/sessions (workingDir) and POST /api/quick-start (case folder)
probe with the bounded probe instead of statSync/existsSync. Missing and
non-directory keep INVALID_INPUT; unknown is OPERATION_FAILED, and
quick-start never scaffolds over a folder that did not answer.
- PATH_PROBE_TIMEOUT_MS and MAX_STALLED_PATH_PROBES move to
src/config/path-probe.ts, overridable via CODEMAN_PATH_PROBE_TIMEOUT_MS
(default 1500) and CODEMAN_PATH_PROBE_MAX_STALLED (default 3), and are
documented in the Settings Reference.
- The probe is exported from the utils barrel and imported from there.
A linked case can live on a network mount. When that mount goes away, a
hard mount makes stat() wait indefinitely, and the existsSync() probes in
the case routes and the workspace hook/statusline helpers ran on the event
loop, so a single GET /api/cases (or a session create in that workspace)
froze the whole web server until the mount came back.
Add boundedPathExists() (src/utils/bounded-path-probe.ts): an async stat
that answers "absent" after 1.5 s, shares one in-flight probe per path,
remembers a timed-out path until its stat finally settles, and refuses to
start new probes while two stalled ones still hold libuv threadpool
workers. Route the read-side probes in case-routes.ts and hooks-config.ts
through it. The settings writers in hooks-config.ts use an async lstat
that treats only ENOENT as missing, so an unreachable workspace is never
mistaken for an empty one and has its settings recreated.
Optional and per-device (showGitStatus, default off). GET /api/sessions/:id/git-status is
read-only and offline (no fetch, --no-optional-locks), skips remote and Docker sessions, caps its
lists, and single-flights concurrent polls. The toolbar indicator shows uncommitted files,
commits not pushed, or a check; clicking opens a draggable panel in the style of the Files window.
Which repositories: the enclosing one when there is one; otherwise every repository up to two
levels below the working directory (capped, skipping dot-folders and node_modules, never
following symlinks), each in a collapsible section, with the indicator summing them. A repository
that merely sits above the workspace and is the home folder or higher (a dotfiles repo) is
ignored. Git-supplied text is only ever written with textContent.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
POST /api/cases takes an optional path; Add Case > Create New gets a 'Create in a
custom folder' option with Browse. The folder is created (or an empty one filled),
scaffolded like a normal case and registered as a linked case. System, home,
credential and Codeman folders are refused; a folder with files is Link Existing's
job; a failure after the first write undoes what this call created. Admin only in
multi-user mode, like Link Existing.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Maintainer merge-time fixes for the three PRs that landed together on the
session create / launch / persistence path.
#514 findings (bot verdict merge-with-fixes):
- minor, fixed: SessionState.model was published and persisted for every
mode, so a codex/opencode cron session reported the app-wide Claude
default it never ran on. toState() now emits it only where the new
cliTakesSessionModel() holds (registry capability model.source ===
'claude-settings-file', no CLI id branch). POST /api/sessions uses the
same helper for its non-claude refusal, so refusal and publication cannot
drift. Recovery then hands back undefined for other modes on its own.
- nit, fixed: the `model` schema admitted a leading dash (and '.', '[').
The first character must now be a letter or digit; still a subset of the
registry's model-claude pattern, so nothing accepted is refused at launch.
- nit, fixed (reject, the consistent choice): `model` with
attachRemoteSession was silently dropped. Now a 400 INVALID_INPUT, as
#514 does for non-claude CLIs and quick-start does for remote cases.
advisorModel (#530) gets the same refusal there. effort and envOverrides
keep their older silent ignore on that branch so no existing caller breaks.
#515 finding (bot verdict merge, one nit):
- nit, fixed: the types/session.ts @fileoverview described CodexConfig as
(model, resumeSessionId); it now lists reasoningEffort, bypass,
animations and renderMode too.
Audit of the merged combination (not reviewed before):
- The conflict resolutions in session.ts (toState), types/session.ts,
reboot-restore-routes.ts, server.ts (restoreMuxSessions), CLAUDE.md and
skills/codeman/reference/endpoints.md (+ plugin mirror) keep both sides
correctly; nothing was lost or doubled.
- A claude session with both `model` and `advisorModel` launches with
`--model <id>` and ONE merged `--settings` JSON (ultracode + advisorModel,
or advisorModel beside `--effort <level>`), on the tmux template
(including the resume || new variant and with the statusLine exporter)
and on the direct-PTY fallback. Both values (and effort) survive
restoreMuxSessions onto a dead pane, a reboot restore into a fresh pane,
and restartCli/dead-pane respawn via _buildRespawnPaneOptions.
- quick-start and ralph-loop take no per-session `model` (matching #514's
scope, POST /api/sessions only) and launch on the app-wide default, which
toState now persists for claude, so recovery stays consistent.
- No defect found in the combination beyond the findings above. Noted, not
changed: advisorModel is still published for any mode a caller sends it
with (launch-inert there; the UI and skill send it for claude only).
Tests: test/session-model-recovery.test.ts pins the pair through both
recovery shapes for effort ultracode/high/none, the recovery constructors'
fields, the tmux-manager builder hop, and the codex/opencode/shell
non-publication; test/advisor-model.test.ts pins the launch lines and a
real direct-PTY Session's pty.spawn argv; the route test covers flag-shaped
models, attach refusals and the published fields. Docs: SessionState.model
docstring, the reboot-restore-registry header, the golden test comment and
the CLAUDE.md model/advisor bullets.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Maintainer merge-time fixes for the MCP server sync (opt-in mcpSyncEnabled, synced, default OFF).
M1, parse errors echoed config text (secrets included) into the HTTP response and Settings:
smol-toml's TomlError carries a code frame of the offending lines and V8's JSON "Unexpected
token" errors quote source. Both catch sites now go through describeMcpSyncError(): a parse
failure is reported by line/column only ("not valid TOML (line 3, column 21)", "not valid
JSON"), an errno failure by Node's own message (code, syscall, path), the module's own
messages via a McpConfigError class, anything else as "unexpected error". Tests put a secret
on the broken line (TOML, both JSON message shapes, and a write refused at the re-parse that
would have quoted a copied server's env) and assert it is absent from the result and from the
route's response body; they fail against the old code.
M2, CODEX_HOME / CLAUDE_CONFIG_DIR / XDG_CONFIG_HOME were ignored, so a sync could create a
file the CLI never reads and report success: new optional registry field
capabilities.mcpConfig.relocation { envVar, path } (registry data, no id branch; schema
reuses the env-name and no-traversal path rules). Declared for claude (CLAUDE_CONFIG_DIR,
checked in the 2.1.289 binary), codex (CODEX_HOME), opencode (XDG_CONFIG_HOME) and gemini
(GEMINI_CLI_HOME, gemini-cli paths.ts); antigravity follows $HOME only (agy 1.1.12 has no
relocation var). Resolved from the server process env at call time: absolute moves the file,
empty means unset, anything else reports the target with the new status "skipped" plus the
reason and writes nothing. Dedupe is now by resolved file. When a caller overrides `home`
without passing `env`, process.env is not consulted, and the route tests clear those vars so
a CI runner's XDG_CONFIG_HOME can never aim a write outside the temp HOME.
M3, feature undocumented: CLAUDE.md Key Patterns paragraph (opt-in, admin-only, additive
only, backups, re-parse validation, 0600 for copied secrets, names-only responses with
position-only parse errors, capabilities.mcpConfig and relocation), a Settings-Reference row
in the wiki, and docs/cli-registry.md + docs/api-reference.md updated for relocation, the
"skipped" status and the error policy.
Nits:
- N1 Preview/Sync before Save: the UI remembers the saved value on open and says "Save
settings to turn MCP sync on first" instead of calling the routes; the 403 message also
says to turn it on and save.
- N2 non-admins in multi-user mode: _applyMcpSyncAdminGate() hides the whole MCP group, called
from applyMcpSyncVisibility() and the codeman:me event like the CLI-management gate.
- N3 scope chip says "synced".
- N4 "(1 servers)" pluralised; the unsupported list only names installed CLIs (route test
pins it with a per-test installed set).
- N5 McpSyncResult / McpSyncTargetResult moved to src/types/mcp-sync.ts (barrel export); only
the route imported them, so no churn.
Verified with an isolated instance (throwaway HOME, own instance and tmux socket) and
Playwright: chip, save-first message, preview rendering and the admin gate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Merge-time fixes for the webhook notification channel (ntfy, Slack, Discord, generic JSON).
Minor 1, App Settings Save silently dropped webhook edits: the modal's main Save now
persists the webhook group beside the settings PUT, the same way it already saves the
model config (saveModelConfigFromSettings), but only when the group differs from what
loadWebhook() put on screen (_webhookPending), so an untouched group never re-PUTs. A
refusal (bad URL, enabled with no URL) shows a warning toast, keeps the modal open and
scrolls to the group with the pasted URL still in the box, instead of a success toast.
Send test now saves pending edits first, so it never tests the old URL while the box
shows a new one. The row says so in one line.
Minor 2, no test for the server.ts glue: new test/webhook-push-glue.test.ts drives the
private sendPushNotifications on a real (never started) WebServer with an EMPTY push
store and webhook.json in the instance data dir, delivering through the real
egress-guarded fetch to a local receiver: a permission prompt arrives with the
host-prefixed ntfy Title and body while Web Push is never called, an immediate repeat is
deduped, "response complete" is skipped under scope attention and sent under all, and a
disabled config or a non-push event sends nothing. Verified it fails when the webhook
call is moved below the "no subscriptions" return.
Minor 3, docs: webhook.json added to CLAUDE.md State Files; a Webhooks section in
docs/wiki/Notifications-And-Approvals.md (setup, what is sent, the secret URL, public
ntfy topics, local targets allowed, dedupe, instance-wide reach in multi-user mode) plus
a table row, and a line in Settings-Reference; new section 10c in
docs/security-architecture.md for the second outbound channel through the web-tab
egress guard.
Nits:
- Orphaned JSDoc: the webhook schema moved below the push schemas, so
PushSubscribeSchema has its comment back.
- Duplicated enums: WebhookUpdateSchema uses z.enum(WEBHOOK_KINDS/WEBHOOK_SCOPES), so
the schema cannot accept a kind the store would coerce away.
- describeError classifies egress refusals with isEgressBlockedError (the
CODEMAN_EGRESS_BLOCKED code anywhere in the cause chain) instead of a message regex;
tests pin a deep cause chain and that matching words alone are not a refusal.
- Markup: the URL input uses set-input, the whitespace-only line is gone, and the switch
row hints to pick a long random topic on public ntfy.sh.
- Remove a saved URL: a "Remove URL" button (shown only while a URL is saved, with a
confirm) sends { url: "", enabled: false }.
- Types placement: WEBHOOK_KINDS/SCOPES and WebhookKind/Scope/Urgency/Config/Result/Status
moved to src/types/push.ts (the IO-side WebhookMessage/Request/Fetch stay in the module).
Browser test extended: main Save persists a pending edit, a refused URL keeps the modal
open with the URL, Send test saves a newly pasted URL first, Remove URL clears it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude Code's advisor tool (code.claude.com/docs/en/advisor) lets the session's
main model consult a second, stronger model at decision points: before
committing to an approach, on a recurring error, and before declaring a task
done. Codeman can now start claude sessions with one.
- `advisorModel` field on POST /api/sessions, /api/quick-start and
/api/ralph-loop/start (fable, opus, sonnet or a full model id in those
families; haiku cannot advise and is refused). Stored on the session and
persisted, so respawn, boot restore and reboot restore keep it. Remote and
docker quick-starts refuse it, as they refuse effort.
- App Settings, Models, "Advisor" segment (Default / Sonnet / Opus / Fable),
synced as `claudeAdvisorModel`. Run, resume and the Ralph wizard send it.
Default sends nothing, leaving the CLI's own /advisor choice in charge.
- Carried as the `advisorModel` key in the launch's single --settings JSON,
merged with ultracode and the statusLine exporter, never the --advisor
flag: `claude --advisor haiku` exits 1 at launch, which would leave a dead
pane on every respawn, while the settings key degrades to no advisor. A
launch without an advisor is byte-identical to before.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- app.js: the shortcut dispatcher returns early for events aimed at a data-raw-keys
field, so Ctrl+W / Ctrl+L / Escape / Alt+1 / Ctrl+K pressed in the Key tester no
longer kill the session, clear the terminal or close Settings
- stock.ts: drop Codex's esc-enter (a line feed works); no stock CLI declares a chord.
The esc-enter path is tested through a clis.json override
- tests: unused port (3194), Ctrl+Enter asserts no keypress, shortcut-isolation test
(verified to fail without the guard)
- docs/comments point at capabilities.newline; set-input class, trailing whitespace
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
capabilities.newline replaces choosing the Shift+Enter bytes in the send-key
route. Key tester shows the keydown/keypress/keyup a browser reports.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Opt-in (mcpSyncEnabled, default OFF; routes 403 until on). Review fixes:
- codex TOML read/validated with smol-toml: CRLF, inline tables and
command-less tables no longer yield a duplicate [mcp_servers.x]; the new
text is re-parsed before writing
- null-prototype tables and own-key checks; unsafe names ignored at every level
- servers switched off in their own CLI (codex/opencode/antigravity) are not copied
- only CLIs that are installed or already have a config file take part
- files receiving env/headers are left 0600; symlinked configs are written through
- one apply at a time (409), unique tmp files cleaned on failure, failed status
- routes set real HTTP status codes; api-reference section; format type single-sourced
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Adds capabilities.mcpConfig to the CLI registry (Claude, Gemini, Codex,
OpenCode), an additive src/mcp-sync.ts, GET/POST /api/mcp-sync and a
Settings > Agents & CLIs control. Never edits or removes an existing
server; backs up each file it changes; reports conflicts.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
SessionState now carries the model a session launched with, and both
recovery constructors (mux recovery and reboot restore) pass it back, so a
recovered session relaunches on the same --model rather than the account
default. A top-level `model` sent with any other CLI is refused, since
those take their model in their own config object, and an empty string
means no per-session model, as it does for modelOverride.
CLAUDE.md now describes both routes for a Claude model. The tests pin
which of `model` and `modelOverride` reaches the launch and which the
case file, and that a model opening with a dash renders as --model's value.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
POST /api/sessions takes an optional `model`, and a Claude session
launches with `claude --model <id>`. It wins over the app-wide default
model and writes nothing to disk, unlike `modelOverride`, which stays as
it is and still writes the case's .claude/settings.local.json.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A prompt posted to /api/sessions/:id/input without `useMux` was written
into the pane in one piece. Claude Code (measured on 2.1.283) takes a
`<text>\r` burst of about a hundred characters or more as a paste, so the
trailing `\r` landed as a newline in the composer and the prompt sat there
unsent while the route answered 200. A later raw `\r` did not recover it;
a tmux `send-keys Enter` did. Short prompts submitted, which is why it
looked random. The same stranding was seen with Codex and OpenCode.
A plain prompt (printable text plus exactly one trailing `\r`, detected by
`isPlainPromptInput()`) now goes through `writeViaMux` even without
`useMux`: the text is typed, Enter is pressed as its own key, and the
SubmitVerifier re-presses it while the prompt is still on the composer.
The write is awaited, since the browser's POST fallback sends frames one
at a time and a following keystroke must not overtake the Enter. Raw
frames (escape sequences, bracketed paste, a line feed, a bare `\r`) and
an explicit `useMux: false` keep the direct write.
Verified on an isolated instance: the 239- and 104-character prompts that
stranded (at +1 s, at +50 s on ultracode, and on a warm session) all
submitted on the first Enter with no `useMux`. The phone's local-echo
flow (a burst, then its `\r` as a separate write) was measured unaffected.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- test: every ENV PATH= line in server.Dockerfile must start $PATH:, and
the ~/.local/bin append is pinned alongside /opt/codeman-cli/bin
- invariants + CLAUDE.md: the append-only PATH rule names ~/.local/bin too
- docker-compose.md: Settings-installed CLIs live in ~/.local on the
app-data mount; reinstall once after upgrading; hand-run npm installs
need --prefix ~/.local
- installEnv() JSDoc describes the in-container npm prefix redirect
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Clicking a .md in the Files panel showed wrapped source with an Edit
pencil and no way to see it rendered, although marked + DOMPurify were
already on the page for the Response Viewer. The viewer now renders
.md/.markdown through that same pipeline (one parser, one click
delegate) with an MD pill back to source, and the plain-text view gains
Lines (CSS-counter gutter) and Wrap toggles. All three persist per device
in their own localStorage keys.
- Relative images are rebased onto the workspace-confined file-raw route
under the document's directory, built inside a <template> so no fetch
fires before the rewrite; a failed load degrades to alt text. Relative
links become a.rv-path so the existing delegate opens them in the
viewer; fragment and http(s) links are untouched.
- The rendered container carries data-i18n-skip so the translator does
not rewrite the document's prose.
- Markdown fetches the route's 10000-line ceiling; other text keeps 500.
- avif renders inline (file-content image set, file-raw MIME map), and
avif/ico printed paths open the viewer instead of tailing bytes. .md
deliberately stays with the tail viewer for printed paths.
webview:changed carried only {action, id} and the SSE routing hint had no
webview: branch, so every connected client received it: in multi-user mode
any user saw the ids of other users' web-tab creates, edits and deletes.
The event now carries the web tab's owner (from the stored record) and is
routed to that owner plus admins. Single-user delivery is unchanged.
The image sets NPM_CONFIG_PREFIX=/opt/codeman-cli, which is image content, so
Update-Codeman.sh discarded every npm-installed CLI (dsh, pi). In the Compose
container, POST /api/clis/:id/install now installs into ~/.local on the
persistent home mount, and ~/.local/bin is appended to the image PATH.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
A single input over MAX_INPUT_LENGTH (64 KiB) was queued for reliable
delivery, refused by both transports (the WebSocket silently, POST with a
400), and never dropped: the client treated the 400 as transient, so the
frame was re-sent every 2 s forever, blocked every later input for that
session, and came back from localStorage on every reload.
- Client: a paste over the frame limit is split into in-limit frames
(never cutting a surrogate pair) delivered in seq order; over 1 MiB, or
an oversized mux write, it is refused with a toast and never queued.
- Client: the POST drain drops a frame answered 400/413; a WS error ACK
drops it too; frames over the limit persisted by an older build are
pruned on load.
- Server: the WebSocket answers an oversized sequenced frame with
{t:'ia',seq,err:'too_large',max} instead of silence (an older client
reads that as a plain ACK and drops it); the POST schema uses
MAX_INPUT_LENGTH instead of a second 100000 limit.
Verified end to end on an isolated instance: a 110 KB paste reached the
PTY byte-identical over both the WebSocket and the POST path, a poisoned
120 KB persisted frame was pruned on load, and a 2 MB paste showed the
refusal toast with nothing queued.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(sessions): stop pinning the w1-myapp placeholder as Claude's /resume title
Local claude spawns passed the tab name as `--name`. That flag is not only the
cross-session peer name: it is also the prompt-box label, the `/resume` picker
entry and the terminal title, and a pinned title stops Claude generating its own
(`customTitle ?? aiTitle`). So every conversation of a case was listed in
`/resume` as the same `w1-myapp`, and none of them got a generated title. On one
workspace, 34 of 34 conversations spawned with `--name` had no ai-title, while
every conversation spawned without it had one.
Only a name the user chose is pinned now: `Session.cliPinnedName` is the name
when `nameSource === 'manual'`, carried to the builders as a separate `cliName`
so the tab/mux name is untouched. Placeholder and auto names let Claude title
the conversation again.
A rename in Codeman also reaches `/resume`: the new name is appended to the
conversation's transcript as the `custom-title` row `/rename` writes (never
creating the file, never writing an empty title). For a pane spawned without
`--name` this holds immediately; a pane spawned with one re-appends its own
title each turn, so there the new name holds from the next spawn.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(sessions): skip no-op renames and docker sessions when syncing the /resume title
A same-name PUT (the Session Options field saves on blur and recomposes the
unchanged placeholder) no longer flips nameSource to manual or appends a
custom-title row, and docker sessions skip the host transcript scan since their
transcript lives in the container. The skill pages no longer use a w<N>- name
as the peer-name example, and the changeset notes the re-append caveat.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* docs: record that nameSource decides --name and renames reach /resume
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: codeman-local <codeman@local>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* feat(cli-registry): add cliManagementEnabled flag and GET /api/clis
Phases 1-2 of docs/cli-enable-disable-plan.md ("PR C" from the #343
review): a synced, default-OFF master flag gating the upcoming CLI
management surface, plus a read-only GET /api/clis endpoint listing
every registry entry (stock + custom, enabled or not) for the
Settings UI. Non-admins in multi-user mode see an empty list rather
than a 403. Write endpoints, auto-install, custom entry CRUD and the
Settings UI list itself land in later phases.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* feat(cli-registry): Phases 3-6 - write API + custom entries + Settings UI
Completes docs/cli-enable-disable-plan.md ("PR C" from the #343 review).
Phase 3: PUT /api/clis/:id toggles enabled for any EXISTING entry (stock or
custom) via a shallow merge onto its clis.json override; shell/claude are
structurally un-disableable (Decision 4), an unknown id 404s rather than
becoming a creation backdoor.
Phase 4: POST /api/clis/:id/install runs a STOCK entry's already-vetted
install command (shell:true, bounded by timeout, process-group killed on
expiry, output captured, audit-logged). A custom entry's id is refused
outright, independent of anything Phase 5 does (Decision 3: a custom
entry's install text is display-only, never executed).
Phase 5: POST /api/clis (create) / PUT /api/clis/custom/:id (update) /
DELETE /api/clis/:id (custom only) — a deliberately minimal request shape
(id/label/shortBadge/binaries/a simple launch variant), assembled into a
full CliEntry with conservative capability defaults and re-validated
through CliEntrySchema before writing, never a relaxed path for
UI-originated entries. Stock-id collisions, duplicate custom ids, and
edits/deletes against a stock id are all rejected explicitly.
Phase 6: the Settings UI section (App Settings -> Agents & CLIs), gated
independently on cliManagementEnabled AND admin-in-multi-user-mode
(Decision 5), fetching/rendering GET /api/clis and wiring every write
endpoint above.
Every write endpoint answers the same way when the feature is off: 403
FORBIDDEN via one shared requireCliManagementGate() (Phase 1's own
checklist item). registry-writer.ts is a new, deliberately separate write
module so registry.ts itself stays import-side-effect-free, same tmp+
rename+0600 shape as custom-model-hosts.ts.
27 new/updated route tests covering every gate, collision, and cleanup
path; full CI gate green (415/416 files, 7854 tests).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): toggling a CLI off in Settings never hid it anywhere else
window.__codemanCliAvailable — the flag isCliAvailable() reads client-side
to gate the welcome-screen buttons, the Run-menu dropdown and the mobile
overview — was built purely from each CLI's own installed-on-PATH resolver
(isClaudeAvailable() etc.), with no reference to the registry's `enabled`
flag at all. So disabling a CLI via the new Settings UI (or a hand-edited
clis.json) updated the settings row and nothing else: every launch surface
kept offering it, both live and after a full page reload, since even a
fresh render never consulted the registry.
Fixed in two places:
- server.ts: after building `available`, intersect the nine real
SessionMode ids against `enabledClis()`. git/cloudflared (utility
binaries, not CLI registry entries) and deepseekBinary (a secondary
installed-only flag for the "add a profile" affordance) are deliberately
left alone.
- settings-ui.js: `toggleCliEnabled()` now patches
`window.__codemanCliAvailable` in place and refreshes the welcome screen,
the mobile overview and an already-open Run menu, mirroring the existing
`installDeepSeekProfile()` pattern for the same "injected once, needs an
explicit patch" reason — without this half, the server-side fix alone
still left every surface stale until the next reload.
New test in test/render-index-html.test.ts: an installed-but-disabled CLI
(codex, forced via clis.json + reloadCliRegistry()) reads as unavailable,
while an installed-and-enabled one (claude) is unaffected by the override.
Verified on the Debian devbox (codeman-devbox, real tmux — this sandbox has
none and WebServer's constructor hard-requires it): typecheck clean, the
new test passes (17/17 in render-index-html.test.ts), the CLI-registry
suites pass (86/86), and the full CI gate is green (415 test files, 7855
tests, 0 failures).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* docs(cli-registry): update the CLI-management plan with status, gotchas, and the Run-menu gap
Phases 1-6 were implemented across two commits (da07b38c, db4557d9) with no
corresponding update to the plan doc itself — every checklist still read
Status: TODO and every box unchecked. Brings the doc in line with the tree:
- A new "Status as of 2026-09-22" section up top: what's actually
implemented (verified by grepping the routes/schema/UI, not just trusting
the commit messages), the availability-flag staleness bug found and fixed
in this session (commit 0c77dd0a) with its devbox verification record, and
one real outstanding gap.
- The outstanding gap: a custom CLI created via Phase 5's write API has no
way to actually be launched. The Run menu is static per-mode markup with
no consumer of window.__codemanCliCatalog, so Phase 6's own "create a
custom entry, confirm it can be launched" verify step was never actually
exercised against this. Documented with two candidate fixes, neither
started.
- Each phase's checklist flipped to [x] where confirmed present in the tree,
Status lines updated from TODO to DONE, and the two originally-open
questions (Phase 2's installed source, Phase 5's PUT endpoint shape)
marked resolved against what actually shipped.
No code changes in this commit — documentation only, so a future session
(or the one already mid-flight on a separate checkout of this same branch)
picks up accurate status instead of a stale plan.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* docs: add the CLI-registry deployment plan and the parked Copilot plan
Both were sitting as untracked scratch files in the master checkout,
never committed to any branch. Moving them here rather than leaving them
loose:
- DEPLOYMENT_PLAN.md is the live tracker for the CLI-registry follow-up
series (PR A #347 merged, PR B #380 merged, PR B2 merged as #458) and
is where PR C (this branch's own CLI-management work) belongs.
- docs/copilot-integration-plan.md is explicitly PARKED, referenced by
name in docs/cli-enable-disable-plan.md's own header as a sibling plan
tracked separately — kept for continuity, not active on this branch.
The other scratch files found alongside these (PRA.md, PRB.md, PR-B2.md
and their review-response counterparts) described PR A/B/B2, all now
merged — deleted from the master checkout as stale rather than committed
anywhere, since their content is superseded by the real merged PRs.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* fix(cli-registry): render enabled CLIs in launch surfaces
* test(cli-registry): update frontend branch guard
* fix(test): isolate suite from deployment environment
* fix(cli-registry): revise Decision 4 - claude is toggleable, shell stays permanent
shell/claude were both structurally un-disableable in the original plan
(Decision 4). Revised: shell keeps the hard backend guarantee (it is the
one non-agent mode several code paths assume always exists as a raw-
terminal fallback), but claude is now a normal toggleable entry like any
other CLI.
Safe to do because internal session creation (tmux-manager.ts, session.ts,
Ralph, plan-orchestrator) resolves a CLI via getCli(), which does not
check `enabled` at all - only the Run menu and the HTTP-facing
sessionModeSchema() (new session requests through the normal API) key off
it. Disabling claude therefore behaves identically in kind to disabling
any other CLI: no internal fallback path breaks, it just stops being
offered for new sessions until re-enabled.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): hide shell's toggle entirely instead of greying it out
A permanently-disabled switch next to every other row's working toggle
read as broken rather than intentional. shell now renders no switch at
all - a plain "Always available" label - so there is nothing to click
that could look like it should work but doesn't. Backend guard is
unchanged (UNDISABLEABLE_IDS still refuses shell unconditionally); this
is UI-only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): sort the Installed CLIs list, installed-first then alphabetical
renderCliList() previously rendered in registry order (each entry's fixed
order field). Now sorts installed CLIs first, then not-installed, each
group alphabetical by label - matches how a user actually scans the list
(what's ready to use, then what needs installing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* style: prettier fixes from the master merge
* fix(cli-registry): install/edit take effect immediately, confirm before install, phone labels
Four gaps found verifying #476 against the #343 review trail:
- Installed or edited CLIs kept reading as missing/stale. Every binary lookup
(the nine per-CLI resolvers and the generic registry one) caches in its own
closure, with a negative-cache backoff of up to 5 minutes, and nothing
cleared them. invalidateCliExecutableResolvers(binaries) now drops those
caches per binary; install (success or failure), create, edit and delete
call it plus invalidateCliResolverCache(id). Before this, a CLI installed
from Settings could fail to launch for minutes, and an edited custom entry
kept launching its old binary until a restart.
- The Settings "installed" badge for a custom entry used a private `which`,
ignoring the entry's searchDirs and the login-shell lookup that spawn and
the Run menu use; it now asks the same generic resolver they do.
- Install ran on a single click. The #343 review asked for auto-install to
sit behind an explicit confirm; the confirm now names the exact command,
which GET /api/clis returns for stock entries only (installCommand).
- The phone Run button showed the two-letter tab badge ("CC", "CX") instead
of the word ("Claude", "Codex"). It uses the registry label again, which is
identical to the old static table for every stock CLI (now pinned).
14 new tests; 9 of them fail against the previous head and pass here.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): address #476 review — safe serialized writes, no id branches, docs
Must-fix:
- registry-writer: start fresh only on ENOENT; refuse (409) a clis.json that
does not parse or has group/world permission bits instead of overwriting it
(isUnsafePermissions now exported from registry.ts)
- mutateRegistryFile(): one promise chain for every mutation, with the
existence/duplicate checks inside the serialized step, plus a unique tmp
name per write
- docs: CLAUDE.md, architecture-invariants, cli-registry (new Settings
section) and api-reference (the six /api/clis routes)
- drop DEPLOYMENT_PLAN.md and docs/copilot-integration-plan.md
Smaller:
- PUT /api/clis/custom/:id keeps the entry's current enabled state when the
body omits it
- runMode setter falls back to the first enabled catalogue entry, not 'claude'
- shell guard keyed on kind === 'shell' (routes + Settings list); stock probe
map shared with server.ts via utils/cli-installed-probes.ts
- stock claude label is now 'Claude Code', so the Run menu / phone overview
label rewrites are gone (doctor row keeps "Claude CLI" via its override)
- welcome buttons are translatable again and read "Run Claude Code" /
"Run Shell"; zh-CN gains "Run Codex" / "Run OMP"
- install: per-id in-flight guard (409) and CODEMAN_* stripped from its env
- fileoverview / CliEnableSchema comments no longer say stock-only
- test-env isolation changes moved to their own PR
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* test(cli-registry): pin the #343/#347 findings #476 makes reachable
A CLI toggled or created through the routes is accepted or rejected by
CreateSessionSchema with no restart (#343 finding 2), and a custom CLI created
through the API renders a real local, remote and docker launch command
(#347 finding 5: no more `cd <path> && undefined`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
Addresses the review on #472.
- CRED_STORES: `.config/gh` and `.azure` now carry `enabledByEnv`
(CODEMAN_AGENT_IMAGE_INSTALL_GH / _AZ), and resolveDockerCredentialArtifacts
skips a store unless that variable is exactly `1`, read at container
create. A host that merely has ~/.config/gh/hosts.yml or a plaintext MSAL
cache no longer copies them into every case container. Tests: the default
environment seeds neither even with the files present, and each store
follows only its own switch.
- Multi-user mode: a non-admin's Clone Repo clone and preflight run with
`git -c credential.helper=` (GIT_NO_CREDENTIAL_HELPERS, placed before the
subcommand), so the server account's helpers are never lent to them.
Verified against a real private repo that it also clears the URL-scoped
credential.<url>.helper entries, and that public clones still work.
Tests: the argv in test/git-clone.test.ts, and the route decision
(non-admin cleared; admin and single-user kept) in
test/routes/case-clone-credential-helpers.test.ts.
- Docs: recreate the case container to pick up seeds (docker/README.md,
Docker-Cases wiki, docker-cases.md); the multi-user behaviour in
docker/README.md and security-architecture.md; "functionally unchanged"
instead of "unchanged" for an image built with both switches off
(server.Dockerfile comment, README, changeset).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0167CiuzLrmjYWxwKp3rMWjw
Ten findings from a two-model review of this branch. Both reviewers cleared the
detection logic itself; everything here is a gap around it.
A route that starts a command in a pane now PERSISTS as well as broadcasts.
`/interactive` and `/shell` did neither before, and the pane-exit watcher cannot
cover for them: its next tick finds `paneExit` already cleared in memory,
reports no change and writes nothing, so `state.json` kept saying the agent had
exited for as long as the session stayed quiet. Nothing reads that record for a
decision yet, which is exactly why it had to be fixed now — part 2 is designed
to read it. The `clearPaneExitForNewPane()` docstring claimed its callers
already persisted; that claim was false for these two, and now says what the
caller owes instead.
The watcher's four guards were unreachable by any test. `refreshPaneExits()`
opened with `if (IS_TEST_MODE) return;`, so the read gate, the in-flight
suppression, the generation counter and the empty-read rule could each be
deleted with the whole suite green. The tmux call moves into `readPaneRows()`,
which a test subclass overrides — the shape `runRemoteReconnectTick` already
uses in this file for the same reason — and the test-mode gate moves with it, so
what a test cannot do is spawn a process rather than exercise the bookkeeping.
Each of the four guards now has a test that fails when it is deleted.
The muted status dot turned out to be a specificity fight on three surfaces, not
two. `.tab-status.error` was not excluded, so a session whose agent exited and
whose PTY-exit breaker then tripped lost its red dot to the mute — the state the
browser answers with a "restart it?" confirm, and a needs-you colour by the same
argument that protects the two alert classes. And mobile.css gives a `busy` dot
a 9px size and a green glow with `!important`, while `status` stays `busy` for a
pane whose agent died mid-turn, so a phone rendered a grey dot still wearing the
green halo beside a badge reading "exited". Both measured against the real
stylesheets, both now excluded, and the CSS test reads mobile.css too instead of
being structurally blind to half the problem.
Six comments said things that were not true. Two named the stats collector as
what replaces a restored reading, which is the opposite of the design. The
interval constant argued that 2000 ms keeps a read inside a tick, when the
5000 ms exec timeout means it cannot — which is why the in-flight guard exists.
`MuxSession.discovered` did not say the flag is permanent, though `saveSessions()`
serializes it. The empty-read docstring claimed a distinction that `|| true`
makes impossible. The invariants doc promised more than its drift test delivers.
And CLAUDE.md had no pointer at all, leaving its two hardest prohibitions
("never set `status: 'error'`", "never null the pid") only in the file it is
meant to route people to.
Refs Ark0N/Codeman#446.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Five items, two of which he could only see by running it, plus six smaller
ones. Taking the two blockers first, because both were wrong in ways the
existing tests could not catch.
**Adopting the PTY's rows put the CLI's input line off-screen.** A phone that
took a desktop's 43 rows into a viewport with room for 18 painted an
`.xterm-screen` far taller than its container; xterm's own viewport then had
nothing to scroll, so the bottom of the frame sat below the container with no
gesture able to reach it. Output visible, typing invisible, for as long as the
desktop kept the claim hot. `reconcilePtyGeometry` adopts COLUMNS ONLY now:
width is the axis Ink's wrap and `eraseLines` arithmetic depend on, and keeping
the local row count keeps the composer at the bottom of a viewport that
scrolls. Measured at his geometry — a 360x300 container against a 198x43 pane
now keeps 13 rows, takes 198 columns, paints 202px into a 210px container, and
the input line is inside the box.
**`capture-geometry-retry.browser.test.ts` failed, and CI could not see it**
because the file is in `BROWSER_TEST_GLOBS`. Its premise WAS the clamp —
`getTerminalDimensions()` floored while `fitAddon.fit()` did not — which this
work removes at the source, so it can never hold again at any viewport. The
case survives on its own terms: a pane already drawing at the requested size
must not be replayed. Its premise is now the #464 invariant itself, that the
floored report and the terminal agree, which is a stronger guard because the
clamp coming back fails it here rather than silently restoring the replay loop.
The helper docblock that repeated the old premise is corrected too.
**A session with no pane reported 120x40 and the client adopted it.**
`resize()` writes `_ptyCols`/`_ptyRows` only when `ptyProcess` is set and
nothing seeds them from the spawn geometry, so a dead-pane session still held
the constructor defaults — clicking that tab resized the browser terminal to
120x40 and, on anything narrower, claimed another device owned the pane when
none existed. `Session.ptyGeometry` returns null without a pane, the HTTP route
answers `{}` and the socket sends no frame at all. The raw `ptyCols`/`ptyRows`
getters are deleted rather than left available to be misused again.
**The 40-column floor clipped the pane with nothing able to reach it.** The
affordance keyed on a PTY mismatch, and the floor produces no mismatch — xterm
and the PTY agree throughout, the terminal is simply wider than the box. It
keys on what does not FIT now, MEASURED (`.xterm-screen` against the container,
on the next frame, because the screen takes its width with the render) rather
than derived from cell arithmetic. Measured at 360px: font 24 applies 40
columns and paints 560px, and all 200px of the overhang is reachable.
`.pty-oversized` is renamed `.term-overflows-x`, because after this the old
name describes only one of the two causes.
**"Scroll sideways" did not work on touch for the sessions it targets.**
`touch-action: pan-x` is cancelled before it starts by the `preventDefault()`
`touchstart` calls on every 'content' tap. The terminal's own touchmove handler
pans the container now, with the axis locked once per gesture so a diagonal
cannot pan and scroll at once, and the CSS grants no `touch-action` at all —
handing the browser a pan AS WELL would move the pane twice for one finger on
the taps where that preventDefault does not run. Measured under real touch
dispatch: a 140px swipe reaches `scrollLeft` 140 where it reached 0 before, the
buffer does not move with it, and a vertical swipe still scrolls the scrollback.
Three defects in the above, found while checking it rather than by being told:
- `canPanHorizontally` first tested `scrollWidth > clientWidth` alone, which is
true of a container that is not a scroller — a sideways swipe would have
locked the axis, done nothing, AND suppressed the vertical scroll it should
have been. Gated on the class as well.
- The notice advised scrolling sideways whenever the PTY was wider, including
when it still fitted and nothing scrolled. It is gated on measured overflow,
and on a comparison against the width this container WOULD request rather
than the one it currently holds — once adopted those are equal, so the second
question answers itself false while the condition is still true.
- `_syncTerminalOverflowAffordance` could throw out of `document.getElementById`
before reaching its try block. It runs off every geometry change, so a
cosmetic affordance could have taken the resize down with it.
The smaller items:
- `docs/architecture-invariants.md` no longer explains the equality guard as a
clamp signature; it records what the clamp used to do and why it cannot any
more. Edited by hand — that file is outside the Prettier glob, and letting
Prettier near it rewrote eleven unrelated emphasis markers.
- `throttledResize`'s HTTP fallback reads the reply. It is the path where a
declined resize is least likely to be noticed, because no socket means no
`{"t":"zc"}` frame either.
- The changeset covers the whole release: the geometry work, the queued replay
clear, the renderer watchdog, the body-covering fetch deadline, the WebSocket
output-gap reconcile, the build-generated service-worker precache and
per-build cache key, and the crash-trail hygiene.
- `@xterm/headless` is declared in the root devDependencies instead of being
reached through workspace hoisting.
- The output-gap marker is cleared after any response arrives, not only when
the capture was non-empty: a server that answers with an empty capture HAS
reconciled us, and leaving the marker set refetched on every reconnect.
- `e587d845`'s message claimed a test asserted the failed-load copy against the
built asset. It did not — that assertion lived in a probe deleted with the
other scratch scripts, so the claim was false when it was written. There is a
real test now, and it reads the source rather than `dist/`, because `dist/` is
not committed and a test that skips when it is absent would pass for the wrong
reason in CI.
`Session.ptyGeometry` gets behavioural coverage against the real class in
`session-resize-arbitration.test.ts` rather than a source guard, including the
contrast — a pane that does exist still reports, and still follows a resize —
so "always null" would fail it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Issue #464, "text gets muffled sometimes, in both TUI default and fullscreen".
The screenshot is not a dropped frame or a frozen renderer — it is arithmetic.
Claude Code's TUI wraps its frame at the width the PTY reported and erases the
previous frame by walking the cursor up the rows it believes that frame took. A
browser terminal of a different width makes each logical line occupy more
physical rows than Ink counted, so `eraseLines(n)` clears too few and the new
frame paints over rows nothing erased: doubled lines, and short tool summaries
sitting inside longer prose rows with the prose's tail still visible.
Reproduced against this repo's own xterm before changing anything — a 120-column
PTY against a 62-column terminal renders every wrapped line twice. `test/
terminal-pty-geometry.test.ts` pins that, and pins the clean render at matching
widths beside it, so the assertion cannot be satisfied by code that fixes
nothing.
Four ways the two drifted apart, none of them observable from either end:
1. `fitAddon.fit()` resizes xterm to `proposeDimensions()` RAW while every
server-facing path reported those floored at 40x10. Measured in Chrome at
430px: font size 44 proposed 13 columns, the server was told 40, and xterm
stayed at 13. Three call sites each did their own fit-then-floor, and two
re-read the proposal after the fit — `_shrinkPaddingToFit()` runs exactly
there, so the container had moved.
2. `throttledResize` (keyboard up) and `sendResize` (session detached into its
own window) reflowed locally and withheld only the SIGWINCH. That is the one
combination that cannot be right: a reflow nothing is rendering for buys
nothing and costs correctness. Both now withhold everything, and the
keyboard's settle timer still sends the one resize that stops the PTY going
stale.
3. `setFontSize`/`setFontFamily`/`setFontWeight` move the cell size — a geometry
change — and told the server nothing at all, so raising the font on a phone
left the CLI wrapping at the old column count.
4. `Session.resize` DECLINES a small-viewport request while a desktop connection
holds an active sizing claim, and said nothing, because resize was write-only.
`syncTerminalGeometry()` is now the one function that may change the terminal's
size: it fits, floors and applies as a single step, so the numbers xterm holds
are the numbers the server is told. A test sweeps every module for a bare
`fit()` on the main terminal, and finds exactly one — the owner's own.
For (4) the client cannot win, so it is told the truth instead: both transports
answer a resize with `session.ptyCols`/`ptyRows` (`{"t":"zc"}` on the socket,
the body of the resize POST) and `_onPtyGeometryReport` adopts them. A terminal
that keeps a shape the PTY refused does not render "too narrow", it renders
garbled. Adopting can leave the pane wider than the screen and the container is
`overflow: hidden`, so `.pty-oversized` grants horizontal reach for exactly as
long as the mismatch lasts: correct-and-reachable beats correct-and-clipped
beats garbled. That rule sets both overflow axes and its own `touch-action`
because mobile.css loads later and sets `.terminal-container { overflow:
visible; touch-action: none }` — a bare `overflow-x` would leave overflow-y
computing to `auto` and hand the browser a vertical scroll container the
terminal's touch handler knows nothing about.
Verified in Chrome at 430px against a live server, with a desktop client holding
the claim: the phone adopts 198x43, gets `overflow-x: auto` / `overflow-y:
hidden` / `touch-action: pan-x`, 758px of reach to the right, and keeps its own
vertical scrolling. The pre-fix build was measured in the same harness for the
control.
Two things this deliberately does not do. It does not change who owns the pane
size — the desktop still wins, and `_startMobileResizeRetry` still takes it back
once that goes idle. And `throttledResize` still holds the PTY's shape for the
whole keyboard animation rather than sending a SIGWINCH per step; that decision
predates this and was not re-tested here.
Also in this commit, Ark0N's third-pass review items on #431:
- The response viewer's byte-buffer fallback and `_onSessionClearTerminal` both
used the no-param `/terminal` form, capped only by `terminalBufferMaxBytes`
(32MB) — the largest body the frontend asks for anywhere. One carried no
deadline at all and the other got the 15s tail budget. Both now take the
full-history budget.
- A `?full=1` capture that outruns its deadline falls back to the bounded tail.
The pane is blanked before that fetch, so an abort used to leave a black
rectangle, discard the queued live output and never reach `_connectWs`. A
failed load now still opens the socket, says one dim line where the content
would have been, and clears the tab's spinner — which nothing did, so a failed
select left `aria-busy="true"` set forever.
- `_wsOutputGapSession` is cleared at the repaint that settles it, not in a
`finally` that also ran on the catch. A reconcile that threw, or hit the new
deadline — the flaky link the marker exists for — dropped the gap with nothing
to retry it. `ws.onopen` no longer clears it up front either.
- The replay-clear invariant is pinned in the gate, which is the drift this PR
exists to fix: `_resetTerminalForReplay` must be a queued write and nothing
else, and no module may blank the terminal with a `clear()+reset()` pair.
- `DIAG_ENTRY_MAX_CHARS` replaces the hardcoded 300, bound through a local
first: `CodemanDiag?.x` still throws a ReferenceError when the identifier was
never declared, and that is the one function in the app that must not throw.
- panels-ui's two kill-all clears route through the same helper, and the
xterm-version guard's comment says "resolved lockfile version" rather than
"dependency RANGE", which is what it has pinned since the last round.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The badge alone left the row in NEEDS YOU, which is the thing the issue was
about. The fix is the alert that does not fire.
An idle prompt from a session that is watching its own background work now
opens ALREADY acknowledged. `hook-event-routes` passes `Session.watching` to
`notePrompt()`, which sets `acknowledgedAt` and records why in a new
`acknowledgedReason`. Nothing new suppresses anything: `acknowledge()` has
always meant "the alert this prompt armed is spent", and the prompt itself
stays pending, answerable and available as Read My Mind context. A wrong label
therefore costs a card that does not blink, never an alert that was never
created.
Every surface follows from that. The broadcast carries the reason, so a live
page declines to arm the tab alert and raises no desktop notification. The push
is skipped, since a false alarm is hardest to ignore on a phone. A reloading
page reads `acknowledgedAt` in `seedApprovals()`, which it already did. And
`classifySession()` now reads it too, which is a pre-existing bug fixed here:
acknowledging on one device cleared the alert everywhere except `codeman tui`.
It re-arms for free, because the next idle prompt supersedes the item and is
built fresh. Only `idle` is eligible, so a dialog that blocks the agent still
goes red whatever else it started.
The label is pane-derived and therefore prompt-injectable, so it is now read
from the last two rows of the screen only, with Claude's pattern anchored on
the `·` its footer joins items with, ANSI-stripped and length-capped at the
source. An agent that prints `· 1 monitor ·` into its own output finds no
match.
Verified on an isolated beta: a session that armed a monitor took its idle
prompt acknowledged with no alert on any surface, wore the badge, and showed
"quiet, watching 1 monitor" on its still-answerable card; the same session with
the monitor killed alerted normally on the next prompt. `test/watching-no-alert.test.ts`
pins both directions across all four surfaces.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>