goHome() nulled activeSessionId without stashing the field, so picking the
session again cleared the draft. Stash it first.
Docs: src/web/CLAUDE.md lists cjkInputHoldUntilEnter among the per-device
keys the strict schema does not declare, and notes the sendEnterKey()
exception for the visible CJK field.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Never send a held answer as text + CR in one write: Codex folds an Enter
in the same burst into a paste. A single character is typed, then CR
~120 ms later to the session captured at Enter; anything longer goes
through _sendComposedPrompt. Drops HELD_DIRECT_MAX. No session keeps the
text in the field.
- Cap #cjkInput at 68px on every device, not only touch.
- _autoGrow adds the border height and skips a hidden field.
- setHoldUntilEnter returns early when the mode is unchanged.
- Per-session held drafts: stashed on switch and tile focus, restored on
return, dropped when the session is removed.
- Toolbar Enter presses Enter in the visible CJK field (commits an active
composition first).
- Blank-only field sends a bare Enter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A long single line (over 64 characters) or several lines now go through
the composer's _sendComposedPrompt: one bracketed paste, then Enter as a
separate delayed write to the session captured at Enter. Claude Code took
a long `<text>\r` burst as a paste and left it unsent, and the old delayed
Enter followed a tab switch. A refused prompt keeps the text in the field.
- Deleting held text no longer sends Backspace to the PTY. It goes out only
when the field was already empty (the phantom itself deleted), so
select-all + delete is covered too.
- With the one-shot Ctrl armed, the next single typed character skips the
hold and reaches _handleCjkInput, which turns it into the control byte;
any other change spends the modifier, as in live mode.
- A reload of the session already shown (tapping its tab, the geometry
retry) keeps a held draft.
- With the keyboard down the field stays one line tall, so it no longer
covers the terminal's last rows.
- zh-CN strings for both field placeholders, and a test pinning
cjkInputHoldUntilEnter as per-device.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A per-device setting next to CJK Input keeps typed text in the pinned
field until Enter instead of streaming it to the PTY, so a phone user can
scroll the terminal and edit an answer before sending (Termux-style).
One line goes as text + CR, several lines as one bracketed paste with a
delayed Enter, like the prompt composer. Shift+Enter is a newline,
Escape clears, Backspace on an empty field still reaches the PTY, and
autocorrect is on in this mode. The field grows with its text and the
keyboard layout reserves its real height.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A subagent window could host an xterm attached to a teammate's tmux pane,
but only for a teammate listed in teammatePanesByName, and the SSE
listeners that filled that map were removed in February. Since then the
branch could not be taken, and the code behind it was unreachable:
- initTeammateTerminal and the lazy dispose / restore pair that parked a
teammate terminal while its window was minimized or hidden;
- the two maps (teammatePanesByName, teammateTerminals) and every loop
over them: window close and reconnect cleanup, the live font-weight
save and the skin switch;
- the two early returns in renderSubagentWindowContent that protected a
terminal which could not exist.
Subagent windows render their activity list exactly as before, and a
teammate still gets its name and badge from the agent description. The
server side is untouched: TeamWatcher still holds respawn back while
teammates are active, and the teammate-pane routes remain.
Tests and docs that described "Agent Teams panes" now name what a font
or skin change really reaches: the main terminal, the tiles and the
split pane.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The wizard's only entry point was the "Start Ralph Loop" button on the
start screen, removed in 1.50.0, so none of this could be opened or
triggered from the app any more:
- ralph-wizard.js (the wizard, plan generation flow and the floating plan
subagent windows) and the #ralphWizardModal markup;
- the "Plan Wizard Agents" section of the monitor panel with its cancel
button, and the five plan:* SSE handlers that only fed these surfaces;
- the wizard branches in the subagent window code: connection lines to
the wizard and to plan agents, window placement beside the wizard, and
the wizard cleanup on reconnect. The ordinary path (agent window to its
parent tab) is unchanged, only un-nested;
- the wizard's state on the app object and its z-index constant;
- its styles: 67 classes, three keyframes and a second identical
@keyframes spin.
What stays: the Ralph panel, the Ralph tab in session options, the plan
routes (/api/generate-plan, /api/generate-plan-detailed,
/api/cancel-plan-generation, the ralph-wizard file routes) and the
plan:* SSE events, which are part of the public API. A client that
starts plan generation over the API still gets its events; the page no
longer draws anything for them.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The frontend JS is outside ESLint and knip, so this pass used an AST scan
(every method, function and top-level constant in src/web/public, counted
against identifiers, strings and index.html) plus a selector scan of both
stylesheets. Each hit was confirmed by text search before it went.
JavaScript
- The ten run<Cli>() one-line wrappers and the quickStart() alias: run()
has dispatched to _runCliMode(mode) since the launcher consolidation and
nothing called the wrappers except tests, which now call the launcher.
- The Agent Teams panel code that lost its event listeners in February:
the team tasks panel, the teammate pane window, rebuildTeammateMap and
the three maps that nothing filled any more.
- Unreferenced methods: redockSession, refreshOrchestratorStatus,
toggleSubagentPanel, minimizeSubagentWindow,
openAllActiveSubagentWindows, pickBetterPath, getTodoIcon, deletePreset,
closeRunSummary, saveSessionOptions, getAgentParentSessionId,
_isUltracodeAgentMinimized.
- Six unused constants and a few unused locals (an unused frame-time
computation in the touch scroll loop among them).
CSS
- 62 classes and one id that no markup, script or test names: the old
settings-item / settings-section layout, the pre-redesign respawn and
context-settings rows, the existing-wizard card and others. 116 rules
and about 770 lines. A dead class inside an :is() list only loses that
alternative; the rule stays.
Checked in a browser against an isolated instance: no console errors on
desktop or phone, a shell session runs, and 96 screenshots (desktop,
tablet and phone; settings, session options, add case, panels) are
pixel-identical before and after, apart from clock times.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The viewer renders the agent's answer, so selecting it loses the source:
headings, list markers and code fences do not survive. The only source copy
was the per-code-block button.
Copy Markdown copies the raw source of the newest answer the viewer holds:
every row of its turn, or the last response block when the reader emits no
turns. Tool and status blocks share the assistant role and are left out. The
copied text is recorded where the views render, so a reopened viewer never
copies an earlier answer, and an empty viewer warns instead of copying.
The feedback helper replaces the inline copy of the same logic in the
code-block button. On phones the header title now truncates so the longer
action row stays on screen.
Conflict in skills/codeman/SKILL.md (and its plugin mirror): the list of
modes with neither stop nor blocked gained jcode here and the omp
exception from #798 on the release branch; both are kept.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
jcode (1jehuang/jcode) joins the CLI registry as the `jcode` run mode:
Run menu, phone overview, TUI, quick-start and POST /api/sessions
(`jcodeConfig: { model?, resumeSessionId? }`), local, SSH and Docker
(dedicated agent-image layer), plus codeman doctor and install.sh
through the generated catalogue. Measured on a live jcode 0.98.1 pane.
- Work detection reads jcode's braille status row and `<n>>` composer;
alt screen with mouse strip and PageUp/PageDown paging like opencode.
- Every jcode TUI is a client of one shared per-user daemon whose tools
run with the daemon's env, so no agent skill injection and no JCODE_*
envOverrides prefix.
- New `capabilities.sharedDaemon`: a session kill spares descendants
outside the pane's process group, so closing the tab that started the
daemon no longer cuts every other jcode session off (measured).
- last-response answers an honest empty for an external CLI with no
transcript reader that the pane segmenter cannot read (jcode alone).
- GET /api/jcode/status via the generic registry resolver.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Folding a phone on the home screen left the welcome screen up when the page
had loaded wide (#702): the phone overview's breakpoint listener was wired
from its first show, which a wide-loaded page never reaches. Both home
screens' breakpoint listeners are now installed once from init() and act
only while a home surface is up.
A rail render queued just before the fold could also unhide the desktop
rail behind the phone overview; the debounced refresh now asks again when
it fires.
Tests: test/home-breakpoint-listeners.test.ts (gate) and
test/home-breakpoint-swap.browser.test.ts (browser suite: wide-first and
narrow-first across 599/600 and 767/768, plus a height-only resize).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The read-only card is gone. The welcome screen has one button, "Run a local
model" ("Local model" once one is installed), and App Settings > Models has
one row; both open the same window.
The window follows `install.state`: choose a model (a radio group, with a
memory bar filled to what the selected model needs), confirm the sizes and
the folder, watch the download and the steps, and end on "Start a session".
Paused, failed, installed (running or stopped), Remove and "no model fits"
are screens of the same window. It polls the GET once a second while open.
Every dynamic string goes in through textContent, labels and sentences come
from the payload, no CLI id is compared, and every new string has a zh-CN
entry.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
105 new em-dashes sat in comments, test names and one test fixture from the
foreign tmux adoption work. Replaced by hand with commas, colons or
parentheses, one reading at a time. The fixture now quotes the real refusal
text, which says "It may still be running, try again."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The attach line now takes the rule #770 gave remote and docker launches: bashCArg() single-quotes it at both respawn-pane sites, so it reaches bash verbatim. quoteAdoptLaunch is retired, since its double quotes kept the same $ and backtick safety but lost a real newline. #510's no-cd condition stays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`_renderMarkdown` wrote dir="auto" into its string, before the code pins and
the linkifier. An element carrying dir="auto" re-resolves its direction on
every insertion under it, and a block whose letters all sit in `dir` children
walks its whole subtree each time, so a code-only or path-only document went
quadratic, English ones included.
Measured in real Chromium through the real File Viewer, before and after:
9000 inline-code items 8.7 s to 0.35 s, 9000 bare paths 5.6 s to 0.23 s, a
209 KB out-of-workspace list 41.9 s to 1.4 s. All three now match master.
The pass is now `_applyBlockDirection()`, run last on the DOM by both
consumers. The direction results are unchanged. Tests pin that the rendered
string holds no dir="auto" and that the pass runs after the linkifier.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Names tmux reads as target syntax (`@1`, `%1`, `=eq`, a bare `~`) passed the
has-session guard by name and then joined something else in new-session -t:
another session, or a fresh shell on the foreign server. They are refused at
discovery now, and take the existing skipped note.
One stopped tmux server emptied the whole local list and left a stuck client
per scan. Each server now gets a bounded ping with stdout at /dev/null first,
because a tmux client hands dups of its stdout to the server: a stopped server
holds our pipe open after the client is dead, so a watchdog around list-panes
cannot work. The probe runs in its own process group, all three transports
keep the rows read before a failure, and a missed ping becomes a note.
The attach and the probe pass -u, so a POSIX-locale container no longer garbles
the tab or lists a non-ASCII name as underscores. A docker attach gets the same
TERM and COLORTERM an owned container's exec gets.
A missing tmux no longer reads as "session is gone", and the launch line's `$`
now reaches bash unexpanded, so the ssh attach's PATH line is expanded at the
far end, as the probe's already was.
fix-plan/write, fix-plan/read and ralph-prompt/write refuse an adopted session:
its workingDir is the neutral /tmp, so they read and wrote a predictable name
in a folder anyone can write to.
FOREIGN_MAX_SOCKETS is gone: it capped nothing, and a real cap in glob order
would never reach `default` on a box with many `codeman-*` sockets (this one
has 212). Closing an adopted tab re-reads the outside-sessions list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every string the block shows now has a zh-CN entry, harvested by a test from the
real module. The row's mode comes from the CLI catalog, not a list of ids that
had already missed omp and copilot. The close dialog's line is static, so the
translator can reach it.
A non-admin's poll answers 403, which read as a failed poll: "Could not reach
the server" under a heading they cannot use, and a request every eight seconds.
That now stops the polling and shows no block.
Wide-scan notes are kept apart from local ones, so the next local poll no longer
wipes "remote X: unreachable" while its rows stay on the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brings the 1.33.2 based adoption feature up to master. Conflicts were
resolved by keeping master's intent and re-applying the feature on top:
both sides kept for imports, the script tag and the stylesheet blocks; the
trust-dialog guard keeps master's stopped check plus the adopted refusal;
the Ralph and image watchers keep master's remote branch plus the adopted
skip; the close confirmation keeps master's worktree option plus the
adopted wording.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude Code's EnterWorktree moves the running process into
<repo>/.claude/worktrees/<name>, while Session.workingDir stays on the main
checkout. The Files panel kept walking workingDir, so it listed a tree the
agent had left.
paneCwd already follows the move, measured on Claude Code 2.1.318 in both
directions, so nothing new has to track the agent. It also follows every cd
in a shell, so a new SessionState.liveWorktree narrows it to a linked
worktree, read from the .git file without starting git.
Only a folder strictly below workingDir is ever an answer, and the listing
only starts there: returned paths stay relative to workingDir, so the
preview, raw and edit routes are unchanged and confinement does not widen.
A worktree outside the session folder stays unfollowed.
The panel asks with root=live, shows a strip naming the worktree with a
switch to the session folder, and follows the agent in and out while open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
selectSession() toggles .active at once while _syncTabStripCorner() only runs in
the debounced render, so a cap set after measuring left a newly selected first
tab wider than the room and dropped the first row below the toolbar until then.
max-width changes nothing on a narrower tab, so the cap is simply always on, and
the clear-before-measure and finish-the-animation loops go. The no-usable-room
test uses 8 tabs: at 40 the scroll fallback fires first and it passed at any
threshold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The wrapped header strip fell back to the plain wrap whenever its first
tab was wider than the room beside the toolbar. A selected tab is wider
(its gear and close show), so selecting the first tab flipped the whole
strip back: the toolbar took its own column again and, with long names,
every tab took a line of its own. Selecting any other tab brought the
full-width rows back.
The first tab is now trimmed to the room instead (tab-corner-fit, a
max-width from --tab-corner-first-max, its name ellipsized). Only a
toolbar that leaves less than TAB_CORNER_MIN_FIRST_TAB (120px) beside
it keeps the plain wrap, which does not depend on the selection.
Two measuring details make the trim hold:
- the room comes from the rounded-up float width, less the tab's 2px
margin and a pixel for subpixel layout (a tab at the exact width still
wrapped under the float);
- the first tab is measured with its trim cleared and its gear/close
width transitions finished, or a grown room reads the last trim as the
width and a selection change is judged by the width the tab is leaving.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Path links and in-document links carry a placeholder href (#, #fragment) that the click delegate resolves itself, but a middle click fires auxclick, never click, so the browser followed the placeholder and opened the dashboard root in a new tab. A middle click on those links now does what a click does; real URLs keep the browser's own middle click.
Review follow-up for the L-shaped header strip:
- _syncTabStripCorner() keeps the plain wrap when the plain strip is
already past --tab-strip-max-height, checked before .tabs-corner goes
on: the float scrolled with the tabs while the toolbar stayed put, so a
scrolled strip put tabs under #headerRight, and a re-render of a
scrolled two-rows strip sized the float from the scrolled frame. The
"- scrollTop" in contentTop is gone (always 0 now).
- A strip just under its max-height that passes it once the float is in
falls back to the plain wrap as well.
- test/tab-strip-corner.browser.test.ts (real Chromium, real header and
styles.css), listed in BROWSER_TEST_GLOBS.
- src/web/CLAUDE.md Tab layouts entry describes the L-shaped classic strip.
Conflict in CLAUDE.md (Adding Features, App setting) resolved by keeping
both sides: #714's sentence that a setting the server acts on must be
synced, after the `.strict()` clause, and #719's mutateSettingsFile() rule
at the end of the bullet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Session update no longer resets "How often" while typing: updateGitFetchStatus
(session-ui.js) leaves a control alone while it is document.activeElement, and
autoSaveGitFetch writes the clamped interval back itself (Enter saves with the
field still focused).
- Partial override shows the app values: enabled = session ?? app switch,
interval = session ?? app interval ?? 300 (session-ui.js updateGitFetchStatus).
- runFetch (git-fetch.ts) arms the spawn with what the core.sshCommand read left
of timeoutMs, and answers ETIMEDOUT without spawning when nothing is left, so a
git that never answers costs one timeout, not two.
- fetchEnvFor keeps a GIT_SSH from the server's environment (repoSshCommand ||
base.GIT_SSH), fileoverview and CLAUDE.md line updated to say so.
- i18n.js: the zh-CN "Git fetch on an interval" description scopes the only
writing git command to the Git window.
- styles.css: the disabled/busy rules are scoped to .git-status-actions
.btn-icon-sm (moved beside .git-status-actions), and the busy pulse stops
under prefers-reduced-motion.
- Comments that called the override per case now say per session: session.ts
(field, restore and getter docs, setGitFetchSettings), git-fetch-scheduler.ts:2,
server-timing.ts:78, server.ts (cleanup and restore), app.js _onSessionUpdated,
session-ui.js (openSessionOptions and updateGitFetchStatus).
- Tests: test/git-fetch-session-options-ui.test.ts (new, JSDOM: typing survives
an SSE update, the Enter write-back, both partial cases); test/git-fetch.test.ts
(GIT_SSH kept; one bound for the read and the fetch, stub git on PATH).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- constants.js:2296,2301 spacedFilePathOnLine: refuse a first word ending in `$`
and an earlier word with no letter or digit (other than a bare `-`), so a
shell prompt showing an absolute working directory (`/mnt/c/proj ❯ code
notes.md`, `/home/me/proj$ cat notes.md`) keeps master's links; the six rows
from the review are pinned, plus OneDrive, `Program Files (x86)` and
`Docs - Copy` still linking whole.
- constants.js:2312: the leading strip is now `/^(?:~?\/|(?:\.\.?\/)+)/`, so
`Saved to: ../My Docs/plan.md` links whole; an interior `..` still links
nothing. Tests for the detector and the terminal provider.
- app.js:3032 _linkifyFilePaths: carry any leading bold label and let
spacedFilePathOnLine() judge it, and give a text node that follows another
inline element a placeholder word, so `**Note:** /home/me/proj/out
report.pdf` and ``Use `--config` /home/me/proj/cfg data.json`` split as in
the terminal; a spaced path inside inline code still links whole. The
now-unused label-pattern guard is gone.
- JSDoc (findFilePathLinks, SPACED_FILE_PATH_LABEL_PATTERN,
spacedFilePathOnLine) and the spaced-path paragraph in
docs/architecture-invariants.md updated to match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- session-ui.js _reloadCasesAfterRun: reload onto the toolbar's own case after every launch, not only one that names its case; comment updated
- test/tab-new-session.test.ts: a worktree tab's "+" Claude launch, the toolbar Run and a group's "New session" each keep the toolbar's case after a "+" moved lastUsedCase (fail without the fix); the reload setup is shared with the existing lastUsedCase test
- docs/architecture-invariants.md:349: the _reloadCasesAfterRun sentence covers every launch
- app.js _openTabLayoutMenu focusout: focus landing on the trigger is not a departure, so pressing the "+" again closes its picker in a real browser
- tab-rail-resize.js openTabRailActionMenu: close the group menu too, so the rail's ... pressed again does not leave the picker beside the row menu
- tab-rail-resize.js:329-331: the "New session here…" comment no longer says Enter on the "+" does nothing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A wrapped classic tab strip stopped at the toolbar's left edge on every row,
so the space under the header chips stayed empty and long tabs took a row
each. Once the strip wraps, the toolbar now sits over the strip's top-right
corner and the strip lays its tabs out inline around a float sized to the
toolbar's box (_syncTabStripCorner), so only the rows beside the toolbar stop
short of it and every later row runs the header's full width.
- Wrap is still measured with the toolbar in flow (the corner is dropped
before the measure), so the single-row strip is unchanged.
- A ResizeObserver on the toolbar re-decides wrap + corner and redraws the
lineage routes when a reading or the divider changes its size.
- Falls back to the plain strip when the first tab cannot fit beside the
toolbar (it would otherwise leave an empty band).
- Classic arrangement, desktop, header host only; state/case/ledger, the
sidebar and the tab rail keep their own layouts.
The + announces a menu but Enter and Space did nothing on it, and the header strip has no row menu to fall back on. A + on a Docker tab the toolbar has not selected read only the link-time mode list, since nothing probed its container.
Opening the picker from the keyboard focuses an entry, so a held Enter or Space repeated onto it and launched that CLI; the shared tab-layout menu now ignores a repeated Enter or Space.
The Response Viewer and the File Viewer's markdown view gave no block a
dir, so a right-to-left answer was left-aligned with its punctuation on
the wrong end and its bullets and quote bar on the left.
_renderMarkdown now gives each outermost prose block dir="auto" (nested
blocks inherit, so a list keeps its markers on one side), pins pre and
code to dir="ltr", and keeps a dir the agent wrote. _linkifyFilePaths
pins the path anchors it creates to ltr. Because dir="auto" skips
descendants that carry a dir, code and paths no longer decide a
sentence's direction. The list indent, quote bar and table borders move
to logical properties, and the phone Compose textarea gets dir="auto".
The terminal pane is unchanged: xterm.js has no right-to-left support
(xtermjs/xterm.js#701).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Fetch is the only git command Codeman runs that writes, and the only one that runs a
repository's own fetch-post hook, so it stays behind a click and off by default. The Git
status window's header row gains Fetch; App Settings -> Bottom bar gains the switch and
the interval, synced because the scheduler acts on them, and Session Options -> Git
overrides both per case. The scheduler reads settings fresh each tick, times the interval
from the start of a run, never overlaps runs, and re-checks the Docker and remote rules
every tick before any git runs. Nothing but remote-tracking refs moves: HEAD, the index
and the working tree are proven unchanged against real git while origin/main advances.
Tests: src/git-fetch.ts and the scheduler, the per-case settings route, the synced/display
setting split, the two new i18n rows, and the Fetch block of the Git status browser suite.
Opening another session in the case you are already working in meant re-picking the case and the mode in the toolbar. An opt-in + now sits with each tab's gear and close icons (App Settings, Tabs, New Session Button on Tabs: per device, off by default everywhere). It opens a menu of the CLIs that tab's case can start, each shown with its logo and name as in the Run menus, and a pick starts one session in that tab's case, or the managed worktree it runs in, and in its named group, without changing the Run button's mode or case.
The CLIs offered follow the Run menu's own rule for the case, so a Docker case lists what its container has rather than what the host has. A tab outside any named group sends no group, so the case's default session group places the new session the way it places a toolbar Run. Wherever a tab has a row menu (the vertical rail, the sidebar) that menu gains "New session here…", the keyboard route to the same picker, since Enter on the + itself does nothing. On a phone the + joins gear and close on the active tab only, and the label reserve grows to 68px while the setting is on, so the tab's centre stays off the icons.
The shared tab layout menu no longer closes when focus leaves an item for nowhere: Safari never focuses a clicked button, so pressing an item blurred the focused one with no related target and the click was lost. This is the tile count menu's rule, and it fixes the named-group menu as well.
Every keyboard open and close resized the PTY, and Claude Code's inline renderer answers each height change by clearing the screen and reprinting only the transcript tail that fits, so rows above that tail were lost from tmux for good. Measured on Claude Code 2.1.306 with tmux 3.2a: five keyboard cycles (62x38 to 62x15 and back) left 75 of 100 numbered lines in the pane's history; with the rows held the PTY stays 62x38, no SIGWINCH reaches the pane and all 100 remain (#672).
While the keyboard is up the rows captured at the show transition are held through getTerminalDimensions, columns still follow the box, and the screen, now taller than its box, is translated up by --kb-clip so the last content row sits at the bottom of the visible area. This is the one documented exception to the columns-only geometry rule: there the extra rows came from another device and nothing kept the composer in view, here they are this device's own rows held on purpose and the clip keeps the composer visible. The local-echo overlay's setRowLimit narrows the renderer's existing totalRows bound, so one place decides where a long draft stops growing downward.
Only inline renderers hold, through a new registry capability keyboardHold: 'inline' (Claude alone) published to the page as window.__codemanKeyboardHoldModes. Full-height layouts such as codex, Claude's fullscreen mode (mouse tracking on, unmeasured), and remote or docker panes resize as before. The hold is released on keyboard close, a shape change, a tab switch, a session update, a reconnect, or the setting turned off. Per-device setting Keep Size Under Keyboard, default on.
A spaced path is no longer taken across a `path:line` suffix (grep -n, rg -n
and compiler output) and an absolute path after a generic label such as
`Error:` or `Note:` goes back to the ordinary detectors: any label must now
be a path label. `Saved the report to: /mnt/c/My Docs/a.docx` splits as on
master, pinned as a documented trade-off.
Also:
- a rooted candidate needs a directory before its first space, and an
unlinkable one reserves its span only while its last word holds a `/`, so
`/usr/bin/env node build.js` and `/review the changes in src/foo.ts` keep
their links while `/etc/secret files/passwords.txt` still links nothing
- a run of spaces is a column gap, not part of a name
- a leading `./` is not read as a segment
- the response viewer carries a bold path label that starts a later line of
a paragraph (after a `<br>`), and degrades if the label pattern is missing
- response viewer tests render with the options chat uses
Conflict in config/test-suites.ts resolved by keeping both sides: #689's
header-divider and #692's header-host-sensors browser tests are both
listed in BROWSER_TEST_GLOBS.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
_notePaneHistory JSDoc names the responses it skips (an error envelope on any path, a refresh that lost its owner, a pull whose select generation moved)
selectSession records the pane count only for a non-error envelope (capture.json?.success !== false), pinned in the static guard of test/pane-history-memory.test.ts; the two invariant paragraphs now name the tab switch beside the refresh and the pull
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>