A new install has no seen list, so every new OpenCode user was still warned about
an October incident that is long over. The mechanism stays for the next notice;
an empty list is now a valid file, and the validators keep running over whatever
it holds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
selectSession() toggles .active at once while _syncTabStripCorner() only runs in
the debounced render, so a cap set after measuring left a newly selected first
tab wider than the room and dropped the first row below the toolbar until then.
max-width changes nothing on a narrower tab, so the cap is simply always on, and
the clear-before-measure and finish-the-animation loops go. The no-usable-room
test uses 8 tabs: at 40 the scroll fallback fires first and it passed at any
threshold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both _abandonTunnelEnable() returns come after saveAppSettingsToStorage() wrote
the new values to this device but before _unsavedSettingsBaseline was set, so
after cancelling the no-password prompt the next Save sent no
showPlanUsageLimits flip and did not reload for a gesture-control change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The wrapped header strip fell back to the plain wrap whenever its first
tab was wider than the room beside the toolbar. A selected tab is wider
(its gear and close show), so selecting the first tab flipped the whole
strip back: the toolbar took its own column again and, with long names,
every tab took a line of its own. Selecting any other tab brought the
full-width rows back.
The first tab is now trimmed to the room instead (tab-corner-fit, a
max-width from --tab-corner-first-max, its name ellipsized). Only a
toolbar that leaves less than TAB_CORNER_MIN_FIRST_TAB (120px) beside
it keeps the plain wrap, which does not depend on the selection.
Two measuring details make the trim hold:
- the room comes from the rounded-up float width, less the tab's 2px
margin and a pixel for subpixel layout (a tab at the exact width still
wrapped under the float);
- the first tab is measured with its trim cleared and its gear/close
width transitions finished, or a grown room reads the last trim as the
width and a selection change is judged by the width the tab is leaving.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
git's refusal quotes the destination, so a folder named openssl or rustls
classified as HOST_UNREACHABLE and the cleanup emptied it. The cleanup now
tests git's own text, DESTINATION_EXISTS is matched first, and ssl/tls are
matched as words. Also: a test for the Docker refusal on the default branch,
the route JSDoc and constant comment, and the folder copy (empty, or new).
The name rule now matches safePathSchema (letters, digits, space and _ - . ~,
no .., no leading dot, at most 255 bytes) so every folder it makes can be
linked. A file as the parent is a 400, errno text is no longer returned,
showHidden is forwarded like browse, and Create is disabled while the request
runs. Adds multi-user scoping tests.
The picker could only choose an existing folder. POST /api/filesystem/mkdir
creates one folder inside a folder the picker may browse (same roots,
ownership and blocked-tree rules as browse), and PathPicker gains an opt-in
allowNewFolder that adds a New folder button and selects the result.
The custom folder was treated as a parent, so the repository landed in <folder>/<case name>. The chosen folder is now the clone destination: an empty existing folder is cloned into directly (CloneOptions.intoEmptyDir, no temporary sibling, never removed on failure), a new folder is created, and a folder with files is refused.
Clone Repo could only clone under ~/codeman-cases. POST /api/cases/clone now takes an optional path (parent folder plus case name) and the Clone tab gets a Clone into a custom folder option with a Browse button, mirroring Create in a custom folder. The path is judged by prepareNewCasePath, the clone is registered as a linked case, the option is admin-only in multi-user mode, and an existing target folder is refused.
`all` also sped up Run's mode colours, Stop's confirming state and the armed Ctrl key. The browser test now reads the transition at rest, since its 250ms hold would also pass the old 0.2s one.
#726 attaches the keyCode 229 recovery only when (pointer: coarse)
matches, which keeps a desktop dead key from arriving twice. Chromium
reports the PRIMARY pointer as fine once a mouse, a trackpad cover or a
stylus is attached, so on such an Android device the module was off
while the text still came from the soft keyboard, and the #441 dropped
last character and the #541 autocorrect duplication came back.
The gate is now a coarse pointer OR an Android user agent. Android ran
the recovery unconditionally before #726, so this only keeps that; a
desktop (fine pointer, not Android) and a touchscreen laptop stay off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ctrl+V's hand-built bracketed paste (#726) and the phone composer's
dropped CSI 200~/201~ markers from the text in ONE pass, so a clipboard
carrying ESC[20 ESC[201~ 1~ came out of it with an ESC[201~ that ended
the frame early: everything after it was typed as keys and each CR ran.
Both now strip until nothing matches. The composer's copy predates this
release; it is the same one-liner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Set --rv-content-max: none on the File Viewer's rendered document, so
ASCII-diagram blocks (capped by that variable with a 720px fallback the
Response Viewer sets) follow the window like the rest of the document,
and pin it with a third assertion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
toggleSessionImageWatcher checks the response, so any refusal puts the
switch back and toasts an error instead of a success; architecture-
invariants says the image watcher never watches a remote workingDir.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hand the bracketed frame to the target terminal with input() so onData
scrolls to the bottom, clears the selection, and delivers the bytes.
The paste trap no longer writes the frame itself.
Fixes#716
Co-authored-by: DDT <1786035110@qq.com>
App Settings' save handled only the multi-user admin-only 403 and the tunnel's no-password 403, so a 409 for a settings.json that does not parse, a 400, a 500 or a dropped connection (`_apiPut` answers null) still toasted "Settings saved" and closed the modal, and the run mode and respawn preset writes failed with no word at all. Those failures now warn with the server's reason (else the HTTP status, else that the server could not be reached), the modal stays open, and nothing that assumes the server stored the save runs: Apply's refresh, the tunnel-starting toast and the gesture-control reload. Since the modal now invites a second Save, the plan-usage collection flip and the gesture reload are judged against the settings the failed save started from until a save lands, so the retry still sends the flip and still reloads.
A save with the tunnel switch on is read as a tunnel refusal only on a 403, so another failure no longer turns the switch off or shows the no-password message, and an accepted no-password retry now resends the whole save instead of the tunnel keys alone, which had left every other setting unsaved behind "Settings saved". Run mode and respawn presets stay saved on this device as before and now say they were not saved on the server. Stopping the tunnel from the welcome screen or the tunnel panel no longer says "Tunnel stopped" when the server refused the write, since the tunnel is then still running.
On every skin but og the skin block outranks the phone :active backgrounds of the toolbar buttons, so Run showed no press at all and the others at most a faint tint, eased in over their 0.2s transition, so a quick tap showed almost nothing. A press now scales and brightens (darkens on the light skins) over 80ms, two properties nothing on these buttons sets at a higher specificity, and honours prefers-reduced-motion.
A browser test presses every phone bar control on all seven skins and pins the computed transform and filter, so a later rule that takes the press away again shows up in the browser suite.
Path links and in-document links carry a placeholder href (#, #fragment) that the click delegate resolves itself, but a middle click fires auxclick, never click, so the browser followed the placeholder and opened the dashboard root in a new tab. A middle click on those links now does what a click does; real URLs keep the browser's own middle click.
The Approvals Inbox strings added a second `Idle: '空闲'` to the ZH_CN
table, beside the original in the status words. Same value, so nothing
changed on screen, but every build warned:
[WARNING] Duplicate key "Idle" in object literal [duplicate-object-key]
A remote-SSH session's workingDir is a path on the remote host, and the
image watcher watched it on the local disk: a folder that is not there,
or a same-named local folder whose images then popped up as the remote
session's. Same root cause as the Ralph @fix_plan.md watcher fix.
Three places start a watch, and all three now skip a remote session:
setupSessionListeners(), the app-wide toggle in PUT /api/settings (which
re-watches every enabled session), and POST /api/sessions/:id/image-watcher,
which refuses to turn it on (INVALID_INPUT, like the Git fetch settings
route) and still lets it be turned off. The Session Options row is hidden
for a remote session, the way the Git tab is, since the client's
_apiPost() does not throw on a refused request.
KeyCode 229 recovery forwarded a composed character that xterm had
already delivered, so a desktop dead-key backtick arrived twice.
create() now attaches only when the primary pointer is coarse.
Ctrl+V text paste went through terminal.paste(), which drops the
CSI 200~/201~ markers after a replay clears xterm's DECSET 2004
mirror. Plain text is now a hand-built bracketed frame on the
session input path.
Fixes#716
Co-authored-by: DDT <1786035110@qq.com>
The merged PRs (mostly #714's git fetch) added about 120 em-dashes in
comments, docs, test names and three settings strings. Each one is now a
comma, colon, semicolon or parentheses. The English settings strings in
index.html and their i18n.js keys change together, and the zh-CN value
for the fetch interval uses full-width parentheses instead of a double
dash. The one left is the regex in constants.js that matches a dash
typed as a word, which is behaviour, not punctuation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review follow-up for the L-shaped header strip:
- _syncTabStripCorner() keeps the plain wrap when the plain strip is
already past --tab-strip-max-height, checked before .tabs-corner goes
on: the float scrolled with the tabs while the toolbar stayed put, so a
scrolled strip put tabs under #headerRight, and a re-render of a
scrolled two-rows strip sized the float from the scrolled frame. The
"- scrollTop" in contentTop is gone (always 0 now).
- A strip just under its max-height that passes it once the float is in
falls back to the plain wrap as well.
- test/tab-strip-corner.browser.test.ts (real Chromium, real header and
styles.css), listed in BROWSER_TEST_GLOBS.
- src/web/CLAUDE.md Tab layouts entry describes the L-shaped classic strip.
terminalLinkLine() cut the URL's first row at its cell to stitch the URL, so a
path in a later column of that row was never scanned. The cut-off columns now
follow the stitched rows as a segment of their own, mapped back to their cells.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
spacedFilePathOnLine() refused only a FIRST word ending in `$`, so `/mnt/c/My Docs$ ls notes.md`
and `/mnt/c/Users/me/OneDrive - Contoso/proj$ code notes.md` linked the whole line. Any earlier
word ending in `$` now refuses the candidate, and both lines link what master links.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts resolved by keeping both sides:
- CLAUDE.md (Agent CLI): #694's opening (an HTTP client, the experimental
agent-session-routes behind agentCoordinationEnabled) with #708's clause
on the directory spawn and its two refusals.
- docs/api-reference.md (codeman agent): #708's spawn paragraph and --json
shape, with #694's inspect/stage/submit in the verb list and the guarded
endpoints named before "adds no route for the other verbs".
- src/cli-agent.ts (@fileoverview): #708's quick-start / directory spawn
routes and #694's experimental routes in one endpoint list; the two
node:fs/promises imports (#708's realpath+stat, #694's open+stat) merged
into one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflict in CLAUDE.md (Adding Features, App setting) resolved by keeping
both sides: #714's sentence that a setting the server acts on must be
synced, after the `.strict()` clause, and #719's mutateSettingsFile() rule
at the end of the bullet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Session update no longer resets "How often" while typing: updateGitFetchStatus
(session-ui.js) leaves a control alone while it is document.activeElement, and
autoSaveGitFetch writes the clamped interval back itself (Enter saves with the
field still focused).
- Partial override shows the app values: enabled = session ?? app switch,
interval = session ?? app interval ?? 300 (session-ui.js updateGitFetchStatus).
- runFetch (git-fetch.ts) arms the spawn with what the core.sshCommand read left
of timeoutMs, and answers ETIMEDOUT without spawning when nothing is left, so a
git that never answers costs one timeout, not two.
- fetchEnvFor keeps a GIT_SSH from the server's environment (repoSshCommand ||
base.GIT_SSH), fileoverview and CLAUDE.md line updated to say so.
- i18n.js: the zh-CN "Git fetch on an interval" description scopes the only
writing git command to the Git window.
- styles.css: the disabled/busy rules are scoped to .git-status-actions
.btn-icon-sm (moved beside .git-status-actions), and the busy pulse stops
under prefers-reduced-motion.
- Comments that called the override per case now say per session: session.ts
(field, restore and getter docs, setGitFetchSettings), git-fetch-scheduler.ts:2,
server-timing.ts:78, server.ts (cleanup and restore), app.js _onSessionUpdated,
session-ui.js (openSessionOptions and updateGitFetchStatus).
- Tests: test/git-fetch-session-options-ui.test.ts (new, JSDOM: typing survives
an SSE update, the Enter write-back, both partial cases); test/git-fetch.test.ts
(GIT_SSH kept; one bound for the read and the fetch, stub git on PATH).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- constants.js:2296,2301 spacedFilePathOnLine: refuse a first word ending in `$`
and an earlier word with no letter or digit (other than a bare `-`), so a
shell prompt showing an absolute working directory (`/mnt/c/proj ❯ code
notes.md`, `/home/me/proj$ cat notes.md`) keeps master's links; the six rows
from the review are pinned, plus OneDrive, `Program Files (x86)` and
`Docs - Copy` still linking whole.
- constants.js:2312: the leading strip is now `/^(?:~?\/|(?:\.\.?\/)+)/`, so
`Saved to: ../My Docs/plan.md` links whole; an interior `..` still links
nothing. Tests for the detector and the terminal provider.
- app.js:3032 _linkifyFilePaths: carry any leading bold label and let
spacedFilePathOnLine() judge it, and give a text node that follows another
inline element a placeholder word, so `**Note:** /home/me/proj/out
report.pdf` and ``Use `--config` /home/me/proj/cfg data.json`` split as in
the terminal; a spaced path inside inline code still links whole. The
now-unused label-pattern guard is gone.
- JSDoc (findFilePathLinks, SPACED_FILE_PATH_LABEL_PATTERN,
spacedFilePathOnLine) and the spaced-path paragraph in
docs/architecture-invariants.md updated to match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- session-ui.js _reloadCasesAfterRun: reload onto the toolbar's own case after every launch, not only one that names its case; comment updated
- test/tab-new-session.test.ts: a worktree tab's "+" Claude launch, the toolbar Run and a group's "New session" each keep the toolbar's case after a "+" moved lastUsedCase (fail without the fix); the reload setup is shared with the existing lastUsedCase test
- docs/architecture-invariants.md:349: the _reloadCasesAfterRun sentence covers every launch
- app.js _openTabLayoutMenu focusout: focus landing on the trigger is not a departure, so pressing the "+" again closes its picker in a real browser
- tab-rail-resize.js openTabRailActionMenu: close the group menu too, so the rail's ... pressed again does not leave the picker beside the row menu
- tab-rail-resize.js:329-331: the "New session here…" comment no longer says Enter on the "+" does nothing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- constants.js:2618 terminalUrlContinuationExtent: trailingColumns now needs a
one-row first line (first.startRow === first.endRow), so a URL row that
soft-wraps with a column on its wrapped part no longer glues the next row
onto that column (`/tmp/report.txtccc/x.html` at 41 columns); master's links
come back. Negative tests for the extent and the link provider.
- constants.js:2847 terminalCellWrappedPaths: comment reworded to match the
JSDoc (the exception is a left-column PATH), plus the wrapped-prose case.
- docs/architecture-invariants.md, CLAUDE.md: one clause that a left column of
wrapped prose (a Description | Path table) also fills the continuation row,
so the path beside it keeps its per-row fragment links, the safe direction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- terminal-ui.js _applyKeyboardClip(): read container.clientHeight only while rows are held, so the release path and the setting-off path skip the forced layout on every render and cursor move
- constants.js keyboardClipPx JSDoc: drop the stray "ponytail:" marker, the note reads as plain text
- src/web/CLAUDE.md "Per-device vs synced settings": list keyboardHoldsRows among the per-device keys SettingsUpdateSchema does not declare
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A wrapped classic tab strip stopped at the toolbar's left edge on every row,
so the space under the header chips stayed empty and long tabs took a row
each. Once the strip wraps, the toolbar now sits over the strip's top-right
corner and the strip lays its tabs out inline around a float sized to the
toolbar's box (_syncTabStripCorner), so only the rows beside the toolbar stop
short of it and every later row runs the header's full width.
- Wrap is still measured with the toolbar in flow (the corner is dropped
before the measure), so the single-row strip is unchanged.
- A ResizeObserver on the toolbar re-decides wrap + corner and redraws the
lineage routes when a reading or the divider changes its size.
- Falls back to the plain strip when the first tab cannot fit beside the
toolbar (it would otherwise leave an empty band).
- Classic arrangement, desktop, header host only; state/case/ledger, the
sidebar and the tab rail keep their own layouts.
Codeman maintainer