Claude Code lets a subscription's one-hour prompt cache expire after an hour idle, and the first turn back re-writes the whole conversation at the cache-write rate; nearly every gap over an hour goes cold, while the saving is concentrated in gaps of one to four hours. Codeman now sends one short keep-alive turn five minutes before the expiry Claude Code reports on its statusline, so the next real prompt still reads the conversation from cache, and stops two hours (configurable) after the last real prompt.
Codeman owns the idle policy for these sessions, as agreed in Discussion #554: a launch with keep-warm on also carries idleCompaction: false in its one --settings JSON, so Claude Code's own idle compaction cannot replace the conversation with a summary a minute before the nudge. It is decided once per launch (keep-warm on, the statusLine exporter injected, Claude Code 2.1.290 or newer, an unknown version fails closed like --name), recorded on the mux record, and picked up by any relaunch; a launch with keep-warm off is byte-identical. A session switched on after launch is kept warm best-effort and the readout says so.
Every guard lives in one pure rulebook: the opt-in (an agent-spawned session does not inherit the app default), a launch that reports cache state, a warm 1h cache with enough tokens at stake and no compaction this gap, a live pane, no usage-limit pause, no respawn, Ralph, task or waiting agent, idle, no open dialog, an empty composer and no recent keystroke. The nudge is a submit and moves lastSubmitAt, which the response viewer's conversation correlation needs; the cap counts from its own persisted lastRealPromptAt instead. Read My Mind drops the exact nudge text, and the turn's stop hook and idle prompt open pre-acknowledged so nothing alerts. The last cache report and the clock survive a restart, so the timer re-arms.
The static plugin gave every file under public/ a year of `immutable`,
including the JSON the page fetches at runtime: whats-new.json (rewritten
every release), the new security-notices.json (edited by hand) and
manifest.json. None of them is content-hashed or `?v=`-busted, so a
browser could keep last release's copy, and a security notice added in a
later release might never reach it. A `.json` file now revalidates
(`no-cache`); every other static asset keeps its immutable year, and a
route that set its own Cache-Control still wins.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Copilot (`copilot`, npm @github/copilot) as a stock CLI entry with the same launch options as the other agent CLIs: model (--model), resume (--resume), continue (--continue) and allow-all (--yolo, clamped off for non-granted multi-user owners). Adds a resolver and GET /api/copilot/status probe, the agent-image package, Run-menu/mobile/logo entries, skill docs and tests.
A codex dialog the session now reads off its screen gets exactly what a
Claude `permission_prompt` hook gets, so every surface that already handles
that event needs no second path: `web/screen-blocked.ts` turns the session's
`blockedChanged` edge into the `blocked` wait signal, an Approvals Inbox
item, the `hook:permission_prompt` broadcast (with `source: 'screen'`), web
push and webhooks, and a run-summary row. That lights the red "needs you"
tab alert and desktop notification, the phone overview's NEEDS YOU row and
the TUI. When the dialog leaves the screen the item it opened is resolved,
and `approval:resolved` clears every client.
It is an ALERT and never a keystroke, following #610's shape for DeepSeek:
the item is `answerInTerminal`, push carries no `approvalId` (so no
Approve/Deny), and the answer route refuses it. The dialog was read from a
screen the agent writes most of, so a forged match must cost a false alert
and nothing more. The message every surface shows is built from the CLI's
registry label, never from the dialog's text. The item gets no `capture`
callback, only its frame as context, because the inbox's option parser and
staleness sweep are shaped for Claude's dialogs and the session owns this
item's lifetime. A CLI whose hooks report blocked gets nothing from the
screen, so declaring both could never alert twice.
The answer route now checks `answerInTerminal` BEFORE its hooks gate and
names the CLI: a codex session has no hooks, and "Session mode cannot have
pending approvals" would be false about the item the caller holds.
Wait signals: `blocked` is available where hooks report it OR a CLI declares
`blockedLine` (`blockedSignalAvailable()`); `stop` stays hooks-only, since
nothing on a screen says a turn ended, so `until=stop` on codex is still a
400 (now suggesting `idle, blocked or exit`). A screen-read dialog is a
level the server keeps reading, so a `GET .../wait` that asks for `blocked`
while one is up answers at once; a caller that asked for `idle` alone keeps
getting `idle`. The MCP and `codeman agent` help text say so.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Sessions in one case share its folder, so several agents on one repository
edit, build and commit in the same checkout and step on each other. A case
whose folder is a git repository can now keep worktrees under
<repo>/.claude/worktrees/<name> on a new branch (default worktree-<name>),
which is Claude Code's own --worktree layout (measured in Claude Code
2.1.296) and the one Codeman's worktree pill already recognizes.
New module src/git-worktrees.ts (pure name/branch gates, worktree list
parsing, exclude text; IO through an injectable runner) and routes
GET/POST /api/cases/:name/worktrees and
DELETE /api/cases/:name/worktrees/:worktree:
- git runs as argv with -- before paths, non-interactive env, process
group timeouts, --no-optional-locks on reads; names are gated before
git and confirmed with git check-ref-format --branch.
- Only <repo>/.claude/worktrees/<valid-name> is created or removed; every
path component is lstat'ed and realpath-checked, so a symlinked .claude
cannot redirect a create or remove outside the repository.
- /.claude/worktrees/ (and the per-workspace hooks file Codeman writes,
which otherwise blocks git worktree remove) go to the repository's
local info/exclude, never a tracked .gitignore.
- Removal is git worktree remove WITHOUT --force, refused while a live
session runs inside; branch delete is git branch -d, never -D.
- Docker and remote cases are refused with a 400, and git never runs for
a case at or inside a Docker case workspace.
Starting a session reuses the existing create paths: quick-start takes
a worktree name (validated, local cases only) and runs hooks, the skill,
the model override and the session itself in the worktree;
POST /api/sessions takes the worktree as workingDir. The unified session
list names the worktree of a live session from its folder layout, so a
codex or shell session in one gets the worktree pill too.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts resolved against #604, #606 and #601:
- constants.js: the rooted link pattern takes html-md's `markdown` and
`html?` with #606's m4v/ogv; #604's relative pattern gets the same list
(link-provider-regex pins the two equal); #604's findFilePathLinks /
folder helpers and html-md's rendersAsPage() are both kept, and
window.CodemanFilePaths exports all of them.
- terminal-ui.js: #604's resolved `target` (relative, ~/ and folder links)
now also goes through rendersAsPage(), so every link kind routes .html to
the page preview; .md routes there through FILE_PREVIEW_EXTENSIONS.
- CLAUDE.md, api-reference, architecture-invariants: both sides' text kept.
- test/folder-grid-ui.test.ts (#604) stubs rendersAsPage() like the other
panels-ui harnesses.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
format:check failed on src/web/server.ts and src/web/public/approvals-ui.js;
both assignments fit on one line at printWidth 120.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict resolved in docs/api-reference.md: #607's prompt cache section and
#528's tabGroupId section are both kept.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts resolved:
- CLAUDE.md: kept master's Prompt uploads paragraph and its longer
File-path links paragraph (XLSX admission limits), and inserted the
PR's html-view sentence after the download-only rule.
- src/web/public/terminal-ui.js: kept master's tile-aware
getSessionId() in the shared file-path link provider and added the
PR's .html routing to the file preview on top of it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Folder routes only looked at the requested name, so `shot.png -> ../secret.bin`
and `notes.txt -> ../history` were served (registration answers 400 for both),
and a FIFO or device behind a supported name parked a worker on an open that
never returned. After resolving, the target's extension must be supported and
it must be a regular file (locally fs.stat, remotely the probe kind).
A 101..255-character file name answered 404 "Route not found": Fastify caps a
path parameter at 100 characters. The server now sets routerOptions.maxParamLength
(MAX_ROUTE_PARAM_LENGTH, shared with the route test harness) and a wiring guard
pins it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Supervised-hook CLIs (DeepSeek Harness) raise Approvals Inbox items whose
answer route refuses keystrokes, but push notifications and the mobile/desktop
UI still offered Approve/Deny. Mark those items answerInTerminal, omit
approvalId (and therefore push actions) for supervised hooks, and show
"Answer in the terminal" / Open session instead of broken buttons.
Fixes#598 (functional part; docs gaps left for a follow-up).
One conflict, in i18n.js SKIP_SELECTOR: master added '.tab-name' itself
(the same fix this branch made for zh-CN tab names), so master's line is
kept and this branch's duplicate comment dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts resolved by keeping both sides:
- terminal-ui.js: master's wheelDeltaWholeLines/sgrWheelReports next to
this branch's pageKeyRows/pageKeysForGesture.
- terminal-tile.js: master's tile SGR wheel forwarding and Shift+wheel
local scroll (_shiftScrollPending) kept; tile paging stays on the
shared pageKeysForGesture state (_pageKeyGesture) with its per-tile
dialog check.
- architecture-invariants.md: this branch's hollow-paging paragraph,
with master's tile SGR forwarding and Shift+wheel sentences replacing
the old "do not forward SGR wheel" note.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Folder paths in the terminal and the response viewer are now links
(rooted or ~/ without an extension, relative with a trailing slash); a
click opens a grid of the folder's supported files, newest first, with
subfolder chips and a parent button. A tile opens the file preview,
which pages through the folder with ‹ › / ←/→; the preview of any file
gets a "Show folder" button.
Server: POST /api/sessions/:id/folders grants + lists a folder (local
fs or one ssh round trip for a remote case) under the attachment guard;
GET …/folders/:folderId/files/:name/(raw|preview|thumbnail) serves one
file by bare name through resolveServableAttachmentPath, so browser
requests still never carry a path. Grants live in their own small
registry so a big folder cannot evict the session's attachments. The
attachment raw route's body is now the shared serveServableRaw helper.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude Code's statusline has carried a prompt_cache object since v2.1.251, and Codeman's statusline exporter already received it, but StatusTelemetrySchema stripped the whole object, so Codeman never knew whether a session's conversation was still cached. Keep it and show it.
StatusTelemetrySchema now lists every documented scalar field null-tolerant (several are documented as possibly null, and the object gains fields across CLI versions, so a strict shape would 400 the post and blank the footer), while parsePromptCache normalizes only the subset Codeman stores, so a hostile localhost payload cannot bloat state. Session.promptCache rides toState with a change-only session:promptCache event, and the route broadcasts the stored object.
The Session Options (Respawn tab) readout shows warm-until or cold with the re-read stake, the cache hit rate, the last miss's causes, and, for Claude Code's own idle compaction (recache_tokens_if_cold null while expected_rebuilds rose), a "compacted at HH:MM" note that is never raised as an alert. setPromptCache stamps that on a new object rather than mutating the parsed report, so the stamp reaches the broadcast. Sessions without a statusline of their own also get a cache:until HH:MM / cache:cold group in the terminal footer. The last report is restored on a Codeman restart (like displayModel) so the readout is not blank until the pane's next render; the readout is time-aware, so a value whose expiry has passed reads as cold, not stale-warm. A launch without the exporter records why (collection off, workspace statusline, remote) so the row says the cause instead of "not reported yet" forever.
This is the sensor a later opt-in keep-warm would read, and the TTL it reports is the source of truth rather than the plan tier.
restoreMuxSessions() re-applied name, auto-clear, auto-compact, auto-resume, nice and the
flicker filter from state.json but not color, pinned/pinnedAt or imageWatcherEnabled, which
the reboot-restore path (reapplyPersistedSessionState) already restores. After a restart or
crash a surviving pane came back uncoloured, unpinned and with its image watcher off, and the
next persist wrote that over the saved values. Found by killing -9 a server with a coloured,
pinned shell session and restarting it.
Review fixes for "place new, child and web tabs into groups".
- Spawned tabs follow their parent only with the new synced setting
spawnedTabsFollowParent (App Settings > Appearance > Tabs, off by default).
TabLayoutService.sessionCreated() reads it fresh through a
childrenFollowParent dep: off, a spawned session lands after its parent and
is marked manual in the same write; on, it follows until moved by hand. The
row menu shows the placement note and "Follow parent again" only when on.
"New session" in a group menu is unaffected. zh-CN label and a
Settings-Reference row.
- applyLegacySessionRank marks a child manual only when the requested order
splits it from its parent's block. A PUT of the current order, or one that
moves a family together, leaves every stored placement alone.
- The browser never echoes a create or delete through PUT /api/session-order,
with or without groups: the layout service already re-projects the order and
broadcasts it, and syncSessionOrder adopts it.
- The placement note in the row menu is plain text described by the menu, not
a focusable menu item.
- A tab that first appears inside a collapsed group briefly marks that group's
header.
- i18n skips .tab-name, so tab names are never translated.
- Tests: legacy-order cases for an unchanged order, a family reorder and a
split; service cases for the setting and for order PUTs; the scheduled
registration test now exercises register/undo; the grouped-create test binds
port 0; one route case runs through the real layout service.
Two changes to the last-resort page-key scroll (_maybePageCliTranscript), the
path a wheel or touch gesture takes when it is not forwarded to the CLI and
the local xterm buffer has no history (normal buffer, baseY 0).
Codex now takes that path too. Newer codex draws on tmux's alternate screen,
which the full strip hides from xterm, so a codex pane is as hollow as a
repaint-mode Claude pane and the wheel did nothing. Codex still ignores SGR
wheel reports and is still never forwarded the wheel; this sends plain
PageUp/PageDown keys, which codex does page its transcript on (measured on
0.157.1 locally and 0.160 over a remote session). Which modes may page is a
new registry capability, capabilities.transcriptPageKeys (claude and codex in
stock.ts), published to the page as window.__codemanTranscriptPageKeys, so
terminal-ui.js holds no CLI id for it.
The first event of a gesture now pages at once. The fallback used to send a
key only after half a screen of accumulated travel (19 rows, about 475px on a
38-row pane), so an ordinary trackpad flick sent nothing. The skipped travel is
owed back by the rest of the gesture, keeping one page per half screen; a pause
of more than 150 ms, a direction change or a tab switch starts a new gesture.
New sessions, spawned child sessions and saved web tabs now land in tab
groups instead of always starting in Ungrouped.
New session in a group:
- The group menu gains "New session" (first item). It expands a collapsed
group and runs ONE launch with the current case and run mode; a launch
already in flight is reported, not queued.
- run({ count, tabGroupId }) threads the group through every launch path
(local POST /api/sessions, remote/docker and external-CLI
/api/quick-start). The count overrides the steppers for that launch only.
- Server: POST /api/sessions and /api/quick-start accept an optional
tabGroupId (Zod, 1-100 chars; null/empty is a 400). The routes pass it to
addSession(), and TabLayoutService.sessionCreated() places the session at
the end of that group in the SAME versioned write that first records it.
The session is added to the live map inside the owner lock (with a
rollback when the write fails), so no queued layout edit can commit it
first. The group is looked up in the creating owner's own layout, so an
unknown, deleted or foreign id is ignored instead of failing the spawn. An
explicit group is a hand placement: a child placed this way is manual.
- The create response carries the committed tabLayout (only when tabGroupId
was sent), adopted before the new tab is drawn. Responses without the
field are unchanged.
Child sessions (parentSessionId / X-Codeman-Parent-Session):
- A child nobody placed follows its parent: the server's existing
normalization already puts it after the parent's rows; the browser now
draws a not-yet-stored child there too (project({ parents })) and, while
groups exist, adopts the server's order instead of echoing its own append
back through PUT /api/session-order (which pinned every child manual).
- The row menu says where a child sits (follows, placed by hand, parent
closed, parent loop) and offers "Follow parent again" only to a hand-placed
child. A child whose parent is gone stands on its own and is never
re-adopted.
Saved web tabs:
- Web tabs are layout refs like sessions; openness stays per device. A
grouped web tab shows (and takes an Alt+N slot) only while open here and
reopens where the layout keeps it. Pinned by tests; no behaviour change.
Unchanged: the flat rail and header strip (markup, HTML5 drag, append and
save on create), the tree semantics and single tab stop, sessionOrder and
Alt+N, and every request that does not send tabGroupId.
The hourly sweep called lstatSync and realpathSync on every live session's working directory, so a linked case on a mount that stopped answering blocked the event loop 30 s after boot and then every hour; the old sweep was fully async. uploadDirs() now probes the workspace with probePathKind() first and skips an unknown path without touching it, then uses fs.promises for the lstat and realpath. The sweep keeps the probe's stall cap; cleanupSession(), acting on one path at the user's request, passes pastCap and removes the directories with fs.rm.
Refusing an upload dir that sits strictly inside the data dir protected nothing (it only ever holds uploads, and a link is already excluded by lstat) while the route kept writing there, so uploads under a workspace like the ~/.codeman/app that install.sh clones were never swept and never removed. Only the two cases that matter stay refused: the upload dir being the data dir, or containing it.
Also: the ignore file's take-back after a failed write no longer replaces the error that caused it with its own, and the shared-dir test's header no longer names the fixed port it stopped using.
A pasted image landed in <workspace>/.claude-images/, a name that belongs to another tool, in a folder nothing ignored, so it showed up in git status of every case that ever received a paste. Uploads now go to a flat <workspace>/.codeman-uploads/ that carries a .gitignore of `*` (written once, never over a file already there): in the workspace because that is the only path identical for a local agent and a container, flat because a nested .codeman/ is the data dir itself when the workspace is the home directory.
The directory names live in paste-image-gc.ts alone. The old folder receives nothing but stays readable for one release: the hourly sweep and the delete cleanup go through uploadDirs(), the image watcher's ignore filter reads the names. uploadDirs() lists only real directories, none that is, contains or sits inside the data dir, and nothing for a remote session, since both consumers delete. The route refuses a remote (SSH) session before touching disk: the file would land on this host under the remote path, where the agent cannot read it.
test/paste-image-dir-shared.test.ts binds port 0 and leaves the port guard's legacy list.
Decided in #553.
`port: 0` already bound an ephemeral port at the socket level, but `this.port`
stayed 0: the banner printed `:0`, CODEMAN_API_URL pointed panes at `:0`, the
docker bridge listener and the unauthenticated-bind warnings read 0, and the
route context's `port` was a by-value snapshot taken in setupRoutes(), before
listen() runs, so `tunnelManager.start(ctx.port, …)` would have been handed 0.
- After `app.listen()`, `this.port` takes the number from
`this.app.server.address()` (string/null addresses are left alone).
- The route context exposes `port` as a getter, and the cron routes get only
the `cron` their CronPort declares instead of a spread copy of the context.
- `get boundPort()`: the readonly accessor tests use instead of a private field.
test/webserver-bound-port.test.ts compares each reader against the socket's own
`address().port`; all three tests fail with only the write-back removed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The tunnel Upload URL page (upload.html) has been broken since the response envelope landed in 458fb81c: it reads j.filename and j.files while the server answers { success, data: { filename } } and { success, data: { files } }, so every upload reported "Saved: undefined" and the recent list stayed empty. Nothing else reads ~/.codeman/screenshots/, and handing a file to an agent goes through POST /api/sessions/:id/paste-image into the session's own workspace, so the page, its Settings row, the suffix branch of the tunnel row helper (now folded into its one caller) and the Upload URL i18n key go.
The three /api/screenshots routes keep working unchanged and log one deprecation warning per process on first use, naming paste-image as the replacement. Per docs/versioning-policy.md they are removed in a later MAJOR, after at least one MINOR release that carries the warning; the docs, CLAUDE.md and the multi-user plan say so.
Static caching: with upload.html gone no HTML is served by @fastify/static any more (every page has its own no-cache route; on a built tree only the precompressed index.html.gz artifact is reachable, as application/gzip, and nothing requests it). The .html branch of setHeaders was therefore dead and goes with the test that fetched upload.html to reach it; a comment now says a new static HTML page needs its own route. The index.html no-cache assertion on the route stays.
Since the CLI registry gave claude kind 'agent' (#476), isExternalCliRunMode() reads claude as an external CLI, so Session Options opened every Claude session on Summary and hid the Respawn and Ralph tabs and every Claude-only control (auto-resume, the respawn loop). The browser catalog now carries the registry's capabilities.external, the flag the server's isExternalCliMode() already reads, and Session Options asks that instead. run() keeps isExternalCliRunMode(): choosing a launch path is a different question, and custom agents rely on it.
Clicking an agent's `.html` path showed source text or downloaded it, so a
generated report could only be viewed by asking the agent to start a web
server. Render it instead, without serving HTML same-origin:
- POST /api/sessions/:id/html-view mints a capability for the file's own
directory (workspace path, or outside it under the attachment guard).
- GET /html-view/:cap/* serves the page and its relative assets with
`Content-Security-Policy: sandbox` WITHOUT allow-same-origin, so the page
runs in an opaque origin (also as a top-level tab) and cannot read the
Codeman document, its cookies or its API.
- Served files: non-dot, asset-allowlisted, realpath-confined to that
directory, blocklist applied; GET only. Capabilities are memory-only with a
rolling TTL and are revoked with the web-tab ones on logout.
- Frontend: the file preview renders HTML in a sandboxed iframe (popout opens
the same URL); terminal `.html` links go to the preview, not the log viewer.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A session header can only name the model a session runs if the server knows
it, so SessionState gains `displayModel: { model, source }`, resolved in a pure
module (src/session-display-model.ts), strongest first:
- custom-endpoint: a Custom Model Endpoint Profile's modelId answers the
session, whatever alias the CLI prints;
- statusline / screen: the newest report from the running CLI itself.
Claude's statusLine exporter already posts model.display_name on every
render; the status-telemetry route now records it (only for a CLI with
capabilities.statusLineTelemetry). A CLI whose registry entry declares the
new capabilities.modelDetect has its footer read off the pane capture the
idle/working probe already takes (no extra tmux call), so an in-session
/model switch is followed at the next transition;
- launch: the model the session was launched with (claude's --model or the
app-wide default, another CLI's <cli>Config.model), read where the registry
says the model param lives;
- nothing known: no field, never a placeholder.
modelDetect is registry data, measured on live panes: dsh-TUI's status line
on the row under its composer (qwen3.8-27b on the owner's route) and codex's
`<model> <effort> ·` footer on its last row. Both anchor on chrome only that
CLI draws, over the last rows of the screen only; a transcript line shaped like
the footer is never taken (fixture tests). The pattern goes through
compileVersionRegex() with exactly one capture group, checked at load time.
An unreadable or covered footer keeps the last model (unlike the watching
label: a model does not stop running when something covers its row). Model
text is untrusted: escape sequences and control characters are stripped and it
is capped at 64 characters. A change emits displayModelChanged, broadcast
(session:updated) and persisted; a restart restores a CLI-reported model until
the next report.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
feat(ui): git status indicator in the bottom bar, with a panel of uncommitted and unpushed work
# Conflicts:
# config/test-suites.ts
# docs/api-reference.md
Optional and per-device (showGitStatus, default off). GET /api/sessions/:id/git-status is
read-only and offline (no fetch, --no-optional-locks), skips remote and Docker sessions, caps its
lists, and single-flights concurrent polls. The toolbar indicator shows uncommitted files,
commits not pushed, or a check; clicking opens a draggable panel in the style of the Files window.
Which repositories: the enclosing one when there is one; otherwise every repository up to two
levels below the working directory (capped, skipping dot-folders and node_modules, never
following symlinks), each in a collapsible section, with the indicator summing them. A repository
that merely sits above the workspace and is the home folder or higher (a dotfiles repo) is
ignored. Git-supplied text is only ever written with textContent.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JrzFKEdBLwVfu6ev2ZscJS
Merge-time fixes for the webhook notification channel (ntfy, Slack, Discord, generic JSON).
Minor 1, App Settings Save silently dropped webhook edits: the modal's main Save now
persists the webhook group beside the settings PUT, the same way it already saves the
model config (saveModelConfigFromSettings), but only when the group differs from what
loadWebhook() put on screen (_webhookPending), so an untouched group never re-PUTs. A
refusal (bad URL, enabled with no URL) shows a warning toast, keeps the modal open and
scrolls to the group with the pasted URL still in the box, instead of a success toast.
Send test now saves pending edits first, so it never tests the old URL while the box
shows a new one. The row says so in one line.
Minor 2, no test for the server.ts glue: new test/webhook-push-glue.test.ts drives the
private sendPushNotifications on a real (never started) WebServer with an EMPTY push
store and webhook.json in the instance data dir, delivering through the real
egress-guarded fetch to a local receiver: a permission prompt arrives with the
host-prefixed ntfy Title and body while Web Push is never called, an immediate repeat is
deduped, "response complete" is skipped under scope attention and sent under all, and a
disabled config or a non-push event sends nothing. Verified it fails when the webhook
call is moved below the "no subscriptions" return.
Minor 3, docs: webhook.json added to CLAUDE.md State Files; a Webhooks section in
docs/wiki/Notifications-And-Approvals.md (setup, what is sent, the secret URL, public
ntfy topics, local targets allowed, dedupe, instance-wide reach in multi-user mode) plus
a table row, and a line in Settings-Reference; new section 10c in
docs/security-architecture.md for the second outbound channel through the web-tab
egress guard.
Nits:
- Orphaned JSDoc: the webhook schema moved below the push schemas, so
PushSubscribeSchema has its comment back.
- Duplicated enums: WebhookUpdateSchema uses z.enum(WEBHOOK_KINDS/WEBHOOK_SCOPES), so
the schema cannot accept a kind the store would coerce away.
- describeError classifies egress refusals with isEgressBlockedError (the
CODEMAN_EGRESS_BLOCKED code anywhere in the cause chain) instead of a message regex;
tests pin a deep cause chain and that matching words alone are not a refusal.
- Markup: the URL input uses set-input, the whitespace-only line is gone, and the switch
row hints to pick a long random topic on public ntfy.sh.
- Remove a saved URL: a "Remove URL" button (shown only while a URL is saved, with a
confirm) sends { url: "", enabled: false }.
- Types placement: WEBHOOK_KINDS/SCOPES and WebhookKind/Scope/Urgency/Config/Result/Status
moved to src/types/push.ts (the IO-side WebhookMessage/Request/Fetch stay in the module).
Browser test extended: main Save persists a pending edit, a refused URL keeps the modal
open with the URL, Send test saves a newly pasted URL first, Remove URL clears it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude Code's advisor tool (code.claude.com/docs/en/advisor) lets the session's
main model consult a second, stronger model at decision points: before
committing to an approach, on a recurring error, and before declaring a task
done. Codeman can now start claude sessions with one.
- `advisorModel` field on POST /api/sessions, /api/quick-start and
/api/ralph-loop/start (fable, opus, sonnet or a full model id in those
families; haiku cannot advise and is refused). Stored on the session and
persisted, so respawn, boot restore and reboot restore keep it. Remote and
docker quick-starts refuse it, as they refuse effort.
- App Settings, Models, "Advisor" segment (Default / Sonnet / Opus / Fable),
synced as `claudeAdvisorModel`. Run, resume and the Ralph wizard send it.
Default sends nothing, leaving the CLI's own /advisor choice in charge.
- Carried as the `advisorModel` key in the launch's single --settings JSON,
merged with ultracode and the statusLine exporter, never the --advisor
flag: `claude --advisor haiku` exits 1 at launch, which would leave a dead
pane on every respawn, while the settings key degrades to no advisor. A
launch without an advisor is byte-identical to before.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Adds capabilities.mcpConfig to the CLI registry (Claude, Gemini, Codex,
OpenCode), an additive src/mcp-sync.ts, GET/POST /api/mcp-sync and a
Settings > Agents & CLIs control. Never edits or removes an existing
server; backs up each file it changes; reports conflicts.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
SessionState now carries the model a session launched with, and both
recovery constructors (mux recovery and reboot restore) pass it back, so a
recovered session relaunches on the same --model rather than the account
default. A top-level `model` sent with any other CLI is refused, since
those take their model in their own config object, and an empty string
means no per-session model, as it does for modelOverride.
CLAUDE.md now describes both routes for a Claude model. The tests pin
which of `model` and `modelOverride` reaches the launch and which the
case file, and that a model opening with a dash renders as --model's value.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
webview:changed carried only {action, id} and the SSE routing hint had no
webview: branch, so every connected client received it: in multi-user mode
any user saw the ids of other users' web-tab creates, edits and deletes.
The event now carries the web tab's owner (from the stored record) and is
routed to that owner plus admins. Single-user delivery is unchanged.
* fix(cleanup): keep .claude-images while a sibling session uses the same dir
cleanupSession() recursively removes {workingDir}/.claude-images. That
directory belongs to the working directory rather than to the session, and
several sessions routinely share one case directory, so closing one session
deleted the pasted images a live sibling still referred to.
The removal now runs only when no other live session has the same working
directory. A session that is itself being cleaned up does not count as live,
so two sessions of one case closed together still remove the dir.
Split out ahead of the exited-agent sweep for Ark0N/Codeman#446, which closes
sessions unattended and would otherwise make the loss routine.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* feat(session): close sessions whose agent exited cleanly (#446)
Part 2 of Ark0N/Codeman#446. Part 1 records an exited agent as
SessionState.paneExit. A session whose agent the user ended with /exit is
now closed through cleanupSession(), the same path the X button takes, so
finished sessions stop piling up on the board. The lifecycle log records
the reason as "agent exited cleanly (status 0)", and the conversation stays
resumable from the Resume list.
shouldCloseCleanlyExitedSession() in the new pure module pane-exit-sweep.ts
holds the rule. It closes a session only when all of these hold:
- The exit status is an explicit numeric 0 with no signal. An absent status
is how a SIGKILL presents on tmux 3.2a, so it counts as unknown and the
row stays. A non-zero status or any signal also keeps the row, with the
exit code on the tab.
- Two authoritative pane reads agreed on that exit.
TmuxManager.getPaneExitReadCount() counts them, and a failed, empty or
skipped read neither confirms nor resets the count.
- No start, attach or relaunch is running for the pane.
Session.paneLifecycleInFlight covers _setupOrAttachMuxSession(), whose
dead-pane branch revives an exited pane on purpose, and restartCli().
setPaneExit() already scopes paneExit to local mux-backed sessions, so
remote, docker and direct-PTY sessions are never closed.
planRebootRestore() now refuses a record whose persisted paneExit is a
clean exit. That covers an agent that exited just before a reboot, before
the sweep reached it. A crashed agent's record stays eligible, like its row.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(web): show "exited" on the phone overview and desktop home rail (#446)
Part 1 of Ark0N/Codeman#446 taught the tab strip and the rich rail rows
to say that a session's agent has exited. The phone overview and the
desktop home rail still said "idle", beside a green or pulsing dot.
_mobileOverviewExit() in mobile-overview.js is now the one rule for all
three surfaces, and _sidebarRichRow() uses it as well. It changes what a
row shows and leaves the row's state alone, because the state still picks
the section and the sort order. An exited row gets an "exited" pill, a
neutral dot and row accent, and a duration measured from when the server
first saw the pane dead. A pending permission prompt or question still
wins, as it does on the tab.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(cleanup): close the gaps review found in the #446 sweep and image guard
Four fixes from a dual review of Ark0N/Codeman#446 part 2.
- The .claude-images guard compares canonical paths, so a sibling that
reaches the same directory through a symlink keeps it. Its comment used to
say that case only missed a deletion; it caused one.
- A detached session counts as a live sibling. DELETE ?killMux=false removes
it from the server's map while its pane keeps running, so the guard now
reads persisted records too, and exempts only sessions being killed rather
than every session in cleaningUp.
- A session being closed refuses startInteractive() and startShell(). The
/interactive route awaits listener setup before the start, and a start
that raced the close could launch a CLI in a tmux session whose record was
then deleted. A failed close clears the mark again.
- The clean-exit sweep tries each exit once, keyed by session id and the
exit's at stamp, so a close that fails is not retried and logged every
two seconds.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(session): keep a clean exit that lands within 10 s of a pane start (#446)
A CLI that prints a startup error ("not logged in", a bad profile, a config
error) and exits 0 used to lose its tab, and the error with it, about 4 s
after launch. The sweep now keeps any clean exit that lands within
CLEAN_EXIT_MIN_PANE_LIFETIME_MS (10 s) of the last start, attach or relaunch
finishing (Session.paneStartedAt, stamped when _withPaneLifecycle ends). The
row stays as "exited (0)" for the user to read and close.
Verified on an isolated instance: a shell that ran `exit 0` 2 s after start
kept its row, one that exited after 13 s was closed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* feat(cli-registry): add cliManagementEnabled flag and GET /api/clis
Phases 1-2 of docs/cli-enable-disable-plan.md ("PR C" from the #343
review): a synced, default-OFF master flag gating the upcoming CLI
management surface, plus a read-only GET /api/clis endpoint listing
every registry entry (stock + custom, enabled or not) for the
Settings UI. Non-admins in multi-user mode see an empty list rather
than a 403. Write endpoints, auto-install, custom entry CRUD and the
Settings UI list itself land in later phases.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* feat(cli-registry): Phases 3-6 - write API + custom entries + Settings UI
Completes docs/cli-enable-disable-plan.md ("PR C" from the #343 review).
Phase 3: PUT /api/clis/:id toggles enabled for any EXISTING entry (stock or
custom) via a shallow merge onto its clis.json override; shell/claude are
structurally un-disableable (Decision 4), an unknown id 404s rather than
becoming a creation backdoor.
Phase 4: POST /api/clis/:id/install runs a STOCK entry's already-vetted
install command (shell:true, bounded by timeout, process-group killed on
expiry, output captured, audit-logged). A custom entry's id is refused
outright, independent of anything Phase 5 does (Decision 3: a custom
entry's install text is display-only, never executed).
Phase 5: POST /api/clis (create) / PUT /api/clis/custom/:id (update) /
DELETE /api/clis/:id (custom only) — a deliberately minimal request shape
(id/label/shortBadge/binaries/a simple launch variant), assembled into a
full CliEntry with conservative capability defaults and re-validated
through CliEntrySchema before writing, never a relaxed path for
UI-originated entries. Stock-id collisions, duplicate custom ids, and
edits/deletes against a stock id are all rejected explicitly.
Phase 6: the Settings UI section (App Settings -> Agents & CLIs), gated
independently on cliManagementEnabled AND admin-in-multi-user-mode
(Decision 5), fetching/rendering GET /api/clis and wiring every write
endpoint above.
Every write endpoint answers the same way when the feature is off: 403
FORBIDDEN via one shared requireCliManagementGate() (Phase 1's own
checklist item). registry-writer.ts is a new, deliberately separate write
module so registry.ts itself stays import-side-effect-free, same tmp+
rename+0600 shape as custom-model-hosts.ts.
27 new/updated route tests covering every gate, collision, and cleanup
path; full CI gate green (415/416 files, 7854 tests).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): toggling a CLI off in Settings never hid it anywhere else
window.__codemanCliAvailable — the flag isCliAvailable() reads client-side
to gate the welcome-screen buttons, the Run-menu dropdown and the mobile
overview — was built purely from each CLI's own installed-on-PATH resolver
(isClaudeAvailable() etc.), with no reference to the registry's `enabled`
flag at all. So disabling a CLI via the new Settings UI (or a hand-edited
clis.json) updated the settings row and nothing else: every launch surface
kept offering it, both live and after a full page reload, since even a
fresh render never consulted the registry.
Fixed in two places:
- server.ts: after building `available`, intersect the nine real
SessionMode ids against `enabledClis()`. git/cloudflared (utility
binaries, not CLI registry entries) and deepseekBinary (a secondary
installed-only flag for the "add a profile" affordance) are deliberately
left alone.
- settings-ui.js: `toggleCliEnabled()` now patches
`window.__codemanCliAvailable` in place and refreshes the welcome screen,
the mobile overview and an already-open Run menu, mirroring the existing
`installDeepSeekProfile()` pattern for the same "injected once, needs an
explicit patch" reason — without this half, the server-side fix alone
still left every surface stale until the next reload.
New test in test/render-index-html.test.ts: an installed-but-disabled CLI
(codex, forced via clis.json + reloadCliRegistry()) reads as unavailable,
while an installed-and-enabled one (claude) is unaffected by the override.
Verified on the Debian devbox (codeman-devbox, real tmux — this sandbox has
none and WebServer's constructor hard-requires it): typecheck clean, the
new test passes (17/17 in render-index-html.test.ts), the CLI-registry
suites pass (86/86), and the full CI gate is green (415 test files, 7855
tests, 0 failures).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* docs(cli-registry): update the CLI-management plan with status, gotchas, and the Run-menu gap
Phases 1-6 were implemented across two commits (da07b38c, db4557d9) with no
corresponding update to the plan doc itself — every checklist still read
Status: TODO and every box unchecked. Brings the doc in line with the tree:
- A new "Status as of 2026-09-22" section up top: what's actually
implemented (verified by grepping the routes/schema/UI, not just trusting
the commit messages), the availability-flag staleness bug found and fixed
in this session (commit 0c77dd0a) with its devbox verification record, and
one real outstanding gap.
- The outstanding gap: a custom CLI created via Phase 5's write API has no
way to actually be launched. The Run menu is static per-mode markup with
no consumer of window.__codemanCliCatalog, so Phase 6's own "create a
custom entry, confirm it can be launched" verify step was never actually
exercised against this. Documented with two candidate fixes, neither
started.
- Each phase's checklist flipped to [x] where confirmed present in the tree,
Status lines updated from TODO to DONE, and the two originally-open
questions (Phase 2's installed source, Phase 5's PUT endpoint shape)
marked resolved against what actually shipped.
No code changes in this commit — documentation only, so a future session
(or the one already mid-flight on a separate checkout of this same branch)
picks up accurate status instead of a stale plan.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* docs: add the CLI-registry deployment plan and the parked Copilot plan
Both were sitting as untracked scratch files in the master checkout,
never committed to any branch. Moving them here rather than leaving them
loose:
- DEPLOYMENT_PLAN.md is the live tracker for the CLI-registry follow-up
series (PR A #347 merged, PR B #380 merged, PR B2 merged as #458) and
is where PR C (this branch's own CLI-management work) belongs.
- docs/copilot-integration-plan.md is explicitly PARKED, referenced by
name in docs/cli-enable-disable-plan.md's own header as a sibling plan
tracked separately — kept for continuity, not active on this branch.
The other scratch files found alongside these (PRA.md, PRB.md, PR-B2.md
and their review-response counterparts) described PR A/B/B2, all now
merged — deleted from the master checkout as stale rather than committed
anywhere, since their content is superseded by the real merged PRs.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N6eadpRyqpA9PD3i139cSD
* fix(cli-registry): render enabled CLIs in launch surfaces
* test(cli-registry): update frontend branch guard
* fix(test): isolate suite from deployment environment
* fix(cli-registry): revise Decision 4 - claude is toggleable, shell stays permanent
shell/claude were both structurally un-disableable in the original plan
(Decision 4). Revised: shell keeps the hard backend guarantee (it is the
one non-agent mode several code paths assume always exists as a raw-
terminal fallback), but claude is now a normal toggleable entry like any
other CLI.
Safe to do because internal session creation (tmux-manager.ts, session.ts,
Ralph, plan-orchestrator) resolves a CLI via getCli(), which does not
check `enabled` at all - only the Run menu and the HTTP-facing
sessionModeSchema() (new session requests through the normal API) key off
it. Disabling claude therefore behaves identically in kind to disabling
any other CLI: no internal fallback path breaks, it just stops being
offered for new sessions until re-enabled.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): hide shell's toggle entirely instead of greying it out
A permanently-disabled switch next to every other row's working toggle
read as broken rather than intentional. shell now renders no switch at
all - a plain "Always available" label - so there is nothing to click
that could look like it should work but doesn't. Backend guard is
unchanged (UNDISABLEABLE_IDS still refuses shell unconditionally); this
is UI-only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): sort the Installed CLIs list, installed-first then alphabetical
renderCliList() previously rendered in registry order (each entry's fixed
order field). Now sorts installed CLIs first, then not-installed, each
group alphabetical by label - matches how a user actually scans the list
(what's ready to use, then what needs installing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* style: prettier fixes from the master merge
* fix(cli-registry): install/edit take effect immediately, confirm before install, phone labels
Four gaps found verifying #476 against the #343 review trail:
- Installed or edited CLIs kept reading as missing/stale. Every binary lookup
(the nine per-CLI resolvers and the generic registry one) caches in its own
closure, with a negative-cache backoff of up to 5 minutes, and nothing
cleared them. invalidateCliExecutableResolvers(binaries) now drops those
caches per binary; install (success or failure), create, edit and delete
call it plus invalidateCliResolverCache(id). Before this, a CLI installed
from Settings could fail to launch for minutes, and an edited custom entry
kept launching its old binary until a restart.
- The Settings "installed" badge for a custom entry used a private `which`,
ignoring the entry's searchDirs and the login-shell lookup that spawn and
the Run menu use; it now asks the same generic resolver they do.
- Install ran on a single click. The #343 review asked for auto-install to
sit behind an explicit confirm; the confirm now names the exact command,
which GET /api/clis returns for stock entries only (installCommand).
- The phone Run button showed the two-letter tab badge ("CC", "CX") instead
of the word ("Claude", "Codex"). It uses the registry label again, which is
identical to the old static table for every stock CLI (now pinned).
14 new tests; 9 of them fail against the previous head and pass here.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* fix(cli-registry): address #476 review — safe serialized writes, no id branches, docs
Must-fix:
- registry-writer: start fresh only on ENOENT; refuse (409) a clis.json that
does not parse or has group/world permission bits instead of overwriting it
(isUnsafePermissions now exported from registry.ts)
- mutateRegistryFile(): one promise chain for every mutation, with the
existence/duplicate checks inside the serialized step, plus a unique tmp
name per write
- docs: CLAUDE.md, architecture-invariants, cli-registry (new Settings
section) and api-reference (the six /api/clis routes)
- drop DEPLOYMENT_PLAN.md and docs/copilot-integration-plan.md
Smaller:
- PUT /api/clis/custom/:id keeps the entry's current enabled state when the
body omits it
- runMode setter falls back to the first enabled catalogue entry, not 'claude'
- shell guard keyed on kind === 'shell' (routes + Settings list); stock probe
map shared with server.ts via utils/cli-installed-probes.ts
- stock claude label is now 'Claude Code', so the Run menu / phone overview
label rewrites are gone (doctor row keeps "Claude CLI" via its override)
- welcome buttons are translatable again and read "Run Claude Code" /
"Run Shell"; zh-CN gains "Run Codex" / "Run OMP"
- install: per-id in-flight guard (409) and CODEMAN_* stripped from its env
- fileoverview / CliEnableSchema comments no longer say stock-only
- test-env isolation changes moved to their own PR
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
* test(cli-registry): pin the #343/#347 findings #476 makes reachable
A CLI toggled or created through the routes is accepted or rejected by
CreateSessionSchema with no restart (#343 finding 2), and a custom CLI created
through the API renders a real local, remote and docker launch command
(#347 finding 5: no more `cd <path> && undefined`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GuHtuPiHXdykq9T6rKQJ9n
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
JD