The wrapped header strip fell back to the plain wrap whenever its first
tab was wider than the room beside the toolbar. A selected tab is wider
(its gear and close show), so selecting the first tab flipped the whole
strip back: the toolbar took its own column again and, with long names,
every tab took a line of its own. Selecting any other tab brought the
full-width rows back.
The first tab is now trimmed to the room instead (tab-corner-fit, a
max-width from --tab-corner-first-max, its name ellipsized). Only a
toolbar that leaves less than TAB_CORNER_MIN_FIRST_TAB (120px) beside
it keeps the plain wrap, which does not depend on the selection.
Two measuring details make the trim hold:
- the room comes from the rounded-up float width, less the tab's 2px
margin and a pixel for subpixel layout (a tab at the exact width still
wrapped under the float);
- the first tab is measured with its trim cleared and its gear/close
width transitions finished, or a grown room reads the last trim as the
width and a selection change is judged by the width the tab is leaving.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A folder made in a cases directory is already a case (no scaffold), which Link
Existing then refuses by name and which deleting would take the linked folder
with. The route refuses a cases directory as the parent (the shared one and the
caller's own), a leading tilde in the name, and maps a vanished parent to 404.
Docs now say every name it accepts is one Link Existing accepts, and the wiki
describes the button.
git's refusal quotes the destination, so a folder named openssl or rustls
classified as HOST_UNREACHABLE and the cleanup emptied it. The cleanup now
tests git's own text, DESTINATION_EXISTS is matched first, and ssl/tls are
matched as words. Also: a test for the Docker refusal on the default branch,
the route JSDoc and constant comment, and the folder copy (empty, or new).
The name rule now matches safePathSchema (letters, digits, space and _ - . ~,
no .., no leading dot, at most 255 bytes) so every folder it makes can be
linked. A file as the parent is a 400, errno text is no longer returned,
showHidden is forwarded like browse, and Create is disabled while the request
runs. Adds multi-user scoping tests.
A direct clone whose git-slot wait timed out came back with no spawnError, so
the cleanup emptied a folder git never touched. GitRun now says whether git
started and the cleanup requires it. Cloning into a folder at or inside a
Docker case workspace is refused, as git status, fetch and worktrees do, since
git would run the new repository's hooks and filters on the host.
The picker could only choose an existing folder. POST /api/filesystem/mkdir
creates one folder inside a folder the picker may browse (same roots,
ownership and blocked-tree rules as browse), and PathPicker gains an opt-in
allowNewFolder that adds a New folder button and selects the result.
A direct clone into an empty folder emptied the folder after any failure, which
deleted a concurrent attempt's finished clone when git had written nothing.
Clones into one folder are now mutually exclusive in-process, the cleanup is
skipped when git refused the folder, never ran, or the mount is unresponsive,
and a name linked while the clone ran is a 409 that keeps the folder.
Documents path for POST /api/cases/clone.
The custom folder was treated as a parent, so the repository landed in <folder>/<case name>. The chosen folder is now the clone destination: an empty existing folder is cloned into directly (CloneOptions.intoEmptyDir, no temporary sibling, never removed on failure), a new folder is created, and a folder with files is refused.
Clone Repo could only clone under ~/codeman-cases. POST /api/cases/clone now takes an optional path (parent folder plus case name) and the Clone tab gets a Clone into a custom folder option with a Browse button, mirroring Create in a custom folder. The path is judged by prepareNewCasePath, the clone is registered as a linked case, the option is admin-only in multi-user mode, and an existing target folder is refused.
`all` also sped up Run's mode colours, Stop's confirming state and the armed Ctrl key. The browser test now reads the transition at rest, since its 250ms hold would also pass the old 0.2s one.
#726 attaches the keyCode 229 recovery only when (pointer: coarse)
matches, which keeps a desktop dead key from arriving twice. Chromium
reports the PRIMARY pointer as fine once a mouse, a trackpad cover or a
stylus is attached, so on such an Android device the module was off
while the text still came from the soft keyboard, and the #441 dropped
last character and the #541 autocorrect duplication came back.
The gate is now a coarse pointer OR an Android user agent. Android ran
the recovery unconditionally before #726, so this only keeps that; a
desktop (fine pointer, not Android) and a touchscreen laptop stay off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
setRemoteWorkingDir() records the path for authority only, and today
nothing else reads it for a remote session (loadFixPlanFromDisk's only
callers are setWorkingDir and the local watcher). The watcher now
remembers the remote mode and refuses both the local read and the local
watch for it, so a future caller cannot import a same-named local twin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ctrl+V's hand-built bracketed paste (#726) and the phone composer's
dropped CSI 200~/201~ markers from the text in ONE pass, so a clipboard
carrying ESC[20 ESC[201~ 1~ came out of it with an ESC[201~ that ended
the frame early: everything after it was typed as keys and each CR ran.
Both now strip until nothing matches. The composer's copy predates this
release; it is the same one-liner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#722 stopped handing a remote session's workingDir to the Ralph tracker,
which also left isFileAuthoritative false for remote sessions only. That
flag is what keeps the output-based completion guessers off, and it is
true for every local session with a working directory, so a remote loop
could end, and mark every todo done, on a prose line such as "All tasks
completed" while a local one cannot.
setRemoteWorkingDir() records the path without reading or watching the
local disk, so the fix plan stays authoritative as for a local session;
the file still reaches the tracker only through fix-plan/read, over ssh.
The test pins both, and fails on the previous head.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Set --rv-content-max: none on the File Viewer's rendered document, so
ASCII-diagram blocks (capped by that variable with a 720px fallback the
Response Viewer sets) follow the window like the rest of the document,
and pin it with a third assertion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Export isPathWithinRoot from file-routes.ts and use it for the remote
@fix_plan.md confinement, so the two checks cannot drift; rewrap the
readRemoteFixPlan JSDoc and say NOT_FOUND; list fix-plan/read and the two
write refusals in docs/remote-sessions.md and architecture-invariants.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
toggleSessionImageWatcher checks the response, so any refusal puts the
switch back and toasts an error instead of a success; architecture-
invariants says the image watcher never watches a remote workingDir.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add the @fileoverview the repo carries on every module: why the parser
exists, why it is POST + /api/ only, and that it owns the root '*'
content-type slot.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hand the bracketed frame to the target terminal with input() so onData
scrolls to the bottom, clears the selection, and delivers the bytes.
The paste trap no longer writes the frame itself.
Fixes#716
Co-authored-by: DDT <1786035110@qq.com>
App Settings' save handled only the multi-user admin-only 403 and the tunnel's no-password 403, so a 409 for a settings.json that does not parse, a 400, a 500 or a dropped connection (`_apiPut` answers null) still toasted "Settings saved" and closed the modal, and the run mode and respawn preset writes failed with no word at all. Those failures now warn with the server's reason (else the HTTP status, else that the server could not be reached), the modal stays open, and nothing that assumes the server stored the save runs: Apply's refresh, the tunnel-starting toast and the gesture-control reload. Since the modal now invites a second Save, the plan-usage collection flip and the gesture reload are judged against the settings the failed save started from until a save lands, so the retry still sends the flip and still reloads.
A save with the tunnel switch on is read as a tunnel refusal only on a 403, so another failure no longer turns the switch off or shows the no-password message, and an accepted no-password retry now resends the whole save instead of the tunnel keys alone, which had left every other setting unsaved behind "Settings saved". Run mode and respawn presets stay saved on this device as before and now say they were not saved on the server. Stopping the tunnel from the welcome screen or the tunnel panel no longer says "Tunnel stopped" when the server refused the write, since the tunnel is then still running.
On every skin but og the skin block outranks the phone :active backgrounds of the toolbar buttons, so Run showed no press at all and the others at most a faint tint, eased in over their 0.2s transition, so a quick tap showed almost nothing. A press now scales and brightens (darkens on the light skins) over 80ms, two properties nothing on these buttons sets at a higher specificity, and honours prefers-reduced-motion.
A browser test presses every phone bar control on all seven skins and pins the computed transform and filter, so a later rule that takes the press away again shows up in the browser suite.
Path links and in-document links carry a placeholder href (#, #fragment) that the click delegate resolves itself, but a middle click fires auxclick, never click, so the browser followed the placeholder and opened the dashboard root in a new tab. A middle click on those links now does what a click does; real URLs keep the browser's own middle click.
The Approvals Inbox strings added a second `Idle: '空闲'` to the ZH_CN
table, beside the original in the status words. Same value, so nothing
changed on screen, but every build warned:
[WARNING] Duplicate key "Idle" in object literal [duplicate-object-key]
A remote-SSH session's workingDir is a path on the remote host, but the
Ralph file routes used local fs on it: fix-plan/read imported a same-named
LOCAL @fix_plan.md (or 404'd), and fix-plan/write and ralph-prompt/write
wrote their files into the local twin of the remote folder. Same root
cause as the Ralph @fix_plan.md watcher fix.
- fix-plan/read reads the file on the remote host through
src/remote-files.ts (the File Viewer's ssh path): one probe of the file
and the workspace, the File Viewer's confinement (a file resolving
outside the workspace is treated as missing), then a capped read (1 MB).
A missing remote file is the same NOT_FOUND as a missing local one; a
non-file, an oversized file or an unreachable host is a failed read,
never a local fallback.
- fix-plan/write and ralph-prompt/write refuse a remote session
(INVALID_INPUT): remote writes are out of scope by design, as for the
File Viewer's remote edit. The Ralph panel already shows the error.
A remote-SSH session's workingDir is a path on the remote host, and the
image watcher watched it on the local disk: a folder that is not there,
or a same-named local folder whose images then popped up as the remote
session's. Same root cause as the Ralph @fix_plan.md watcher fix.
Three places start a watch, and all three now skip a remote session:
setupSessionListeners(), the app-wide toggle in PUT /api/settings (which
re-watches every enabled session), and POST /api/sessions/:id/image-watcher,
which refuses to turn it on (INVALID_INPUT, like the Git fetch settings
route) and still lets it be turned off. The Session Options row is hidden
for a remote session, the way the Git tab is, since the client's
_apiPost() does not throw on a refused request.
KeyCode 229 recovery forwarded a composed character that xterm had
already delivered, so a desktop dead-key backtick arrived twice.
create() now attaches only when the primary pointer is coarse.
Ctrl+V text paste went through terminal.paste(), which drops the
CSI 200~/201~ markers after a replay clears xterm's DECSET 2004
mirror. Plain text is now a hand-built bracketed frame on the
session input path.
Fixes#716
Co-authored-by: DDT <1786035110@qq.com>
Handle untyped zero-byte POST streams at the shared API parser boundary.
Keep request.body undefined and preserve existing typed parsers, 404
fallbacks, authentication and webview proxy stream handling.
Reject nonempty untyped streams on the first byte, and cover parser
boundaries, raw HTTP framing and real WebServer routing with regressions.
The merged PRs (mostly #714's git fetch) added about 120 em-dashes in
comments, docs, test names and three settings strings. Each one is now a
comma, colon, semicolon or parentheses. The English settings strings in
index.html and their i18n.js keys change together, and the zh-CN value
for the fetch interval uses full-width parentheses instead of a double
dash. The one left is the regex in constants.js that matches a dash
typed as a word, which is behaviour, not punctuation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review follow-up for the L-shaped header strip:
- _syncTabStripCorner() keeps the plain wrap when the plain strip is
already past --tab-strip-max-height, checked before .tabs-corner goes
on: the float scrolled with the tabs while the toolbar stayed put, so a
scrolled strip put tabs under #headerRight, and a re-render of a
scrolled two-rows strip sized the float from the scrolled frame. The
"- scrollTop" in contentTop is gone (always 0 now).
- A strip just under its max-height that passes it once the float is in
falls back to the plain wrap as well.
- test/tab-strip-corner.browser.test.ts (real Chromium, real header and
styles.css), listed in BROWSER_TEST_GLOBS.
- src/web/CLAUDE.md Tab layouts entry describes the L-shaped classic strip.
terminalLinkLine() cut the URL's first row at its cell to stitch the URL, so a
path in a later column of that row was never scanned. The cut-off columns now
follow the stitched rows as a segment of their own, mapped back to their cells.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The self-gate now says the skill reads saved Codex conversations offline outside a session; the staging
reference says only tagged input gets 409 during a guarded submit (the rest is held), and the API
reference notes a managed write past a full hold queue falls back to a direct write. Also: missing
reference rows, agent --help naming inspect/stage/submit, the tunnel opt-in in Remote Access, MCP wording.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
spacedFilePathOnLine() refused only a FIRST word ending in `$`, so `/mnt/c/My Docs$ ls notes.md`
and `/mnt/c/Users/me/OneDrive - Contoso/proj$ code notes.md` linked the whole line. Any earlier
word ending in `$` now refuses the candidate, and both lines link what master links.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
readDockerCases() reads an unreadable or half-written docker-cases.json as [], so a fetch (which runs
repository hooks, and runs unattended on the interval) could run inside a Docker workspace. The fetch
paths now read it through a strict reader: the Fetch button answers a failed run (state 'error') and the
scheduler skips the tick, undoes its picks and logs once. The status and diff routes are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The settings readers for git fetch and keep-warm no longer repeat V8's JSON.parse message, which
quotes the text around the fault and could print voiceSettings.apiKey. The 15 s scheduler tick now
logs an unreadable settings.json once, and again only after a successful read in between. Stale
comments that said settings.json is rewritten in place now say writes are atomic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Codeman maintainer