A wrapped classic tab strip stopped at the toolbar's left edge on every row,
so the space under the header chips stayed empty and long tabs took a row
each. Once the strip wraps, the toolbar now sits over the strip's top-right
corner and the strip lays its tabs out inline around a float sized to the
toolbar's box (_syncTabStripCorner), so only the rows beside the toolbar stop
short of it and every later row runs the header's full width.
- Wrap is still measured with the toolbar in flow (the corner is dropped
before the measure), so the single-row strip is unchanged.
- A ResizeObserver on the toolbar re-decides wrap + corner and redraws the
lineage routes when a reading or the divider changes its size.
- Falls back to the plain strip when the first tab cannot fit beside the
toolbar (it would otherwise leave an empty band).
- Classic arrangement, desktop, header host only; state/case/ledger, the
sidebar and the tab rail keep their own layouts.
#689's density steps hide every `.header-system-stats .stat-label` once the
toolbar is narrowed, and #692's readings (GPU, VRAM, GPU MHz, CPU MHz) have
nothing else naming them: at tight, dense and tiny the header showed "40%"
beside CPU's "12%", "3.2G" beside MEM's "7.9G", and two bare "1800 MHz" /
"4200 MHz" with no way to tell the GPU clock from the CPU one. At Compact +
tiny, where values are hidden too, the two clocks (no ring) were left as
0-px items that still took an 8 px flex gap each. Neither PR shows it alone.
- The four host items carry `stat-item--host`, excluded from the density
label hide, so they keep their labels at every step.
- `stat-item--ringless` (static on the two clocks, toggled by
`_updateHostSensors` on VRAM while its total, and so its ring, is unknown)
is hidden at Compact + tiny instead of staying an empty item.
Tests: the browser test drives every density in all three styles against
the real markup and styles.css (it fails on the previous files), and the
unit test pins the VRAM ringless toggle.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict in config/test-suites.ts resolved by keeping both sides: #689's
header-divider and #692's header-host-sensors browser tests are both
listed in BROWSER_TEST_GLOBS.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The palette's "New session" row now shows the agent it will start and
lets Left/Right (or the row's arrows) switch it. The agents come from the
injected CLI catalog, filtered to enabled and installed entries, so no CLI
id list lives in the palette. The pick is a one-shot launch through run()
with a temporary _runMode swap: the Run button's mode is left unchanged.
Conflict in CLAUDE.md's State Files line resolved by keeping #661's new
config-backup entries and this PR's "case default groups" in state.json.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Merge-time fix for #665.
- A markdown link converted to a preview link became `a.rv-path`, so its
label ("Our incident record") took the path style: monospace, 0.92em
and `word-break: break-all`, which split prose mid-word on a phone. The
anchor now also carries `rv-path-link`, and
`.rv-text a.rv-path.rv-path-link` resets font and word-break, as the
File Viewer does for its labelled document links.
- The first new test adds `/tmp/a.json?raw=true` (pins the `?query`
strip) and `/tmp/` (pins the trailing-slash folder check, since
findFilePathLinks finds no folder in a bare `/tmp/`), and checks the
new class.
- The `_linkifyFilePaths` JSDoc and docs/architecture-invariants.md say
the function also rewrites anchors whose href is a scheme-less,
non-`//` path, on purpose without FILE_PATH_LINK_PATTERN's root and
extension filter.
- Mobile Guide: "a web link" in the response viewer opens a tab.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Merge-time fix for #659.
- Alt+Left/Right (File Viewer back/forward) is a display-only entry in
DEFAULT_SHORTCUTS, so the Ctrl+? overlay lists it, and a row in the
help modal's Panels group, pinned in help-modal-shortcuts.test.ts.
zh-CN entry for the new label; the "Restore size" entry is dropped,
since nothing shows that string any more.
- The wiki row moves from "Sessions and tabs" to "Everything else".
- The grip comment in styles.css says only phones hide the grip;
tablets show and use it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Case settings gains a "Default session group" selector (Ungrouped plus every
named tab group of the owner). A new session of the case lands in that group
in the same versioned layout write that registers it, so it is drawn in place
with no Ungrouped-to-group jump.
- Stored per owner and case in state.json (caseDefaultGroups), as the group's
stable id or null for Ungrouped; read and written only through
TabLayoutService under the owner lock.
- Precedence in sessionCreated: explicit tabGroupId, then the parent
placement, then the case default, else Ungrouped. A deleted or foreign id
never fails a spawn and is forgotten only after the creating write lands.
- POST /api/quick-start (local, linked, remote, Docker) and
/api/ralph-loop/start pass their case; POST /api/sessions infers it
lexically from workingDir. The create response carries tabLayout when a
case default placed the session.
- GET/PUT /api/cases/:name/default-group; deleting a case (or an admin
deleting a user's case folder) forgets the value.
- The selector mirrors desktop and phone, reverts on a refused save, and is
redrawn from every adopted tab layout; zh-CN strings added.
A phone in landscape is wider than 599px, so the 44px targets now follow (pointer: coarse) instead of the width. A balanced title broke the zh-CN text inside 入侵; :lang(zh) keeps CJK runs whole and breaks at the title's spaces and colon.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- The card is capped to the room below the toast stack's top and
scrolls inside itself. The stack is fixed and cannot scroll, so on a
phone in landscape the update toast's buttons sat below the screen
with only the × left, which records the notice unread. The accent bar
becomes a background layer, which stays put while the content scrolls.
- Small amber text and the primary button use --notice-ink, darkened a
step on the four light skins, where --yellow measured 3.9 to 4.4:1 for
the 10.6px eyebrow (now 5.1 or better, the button label 5.7 or better).
- The update toast that carries a notice frames itself in the accent
colour and leaves the amber to the warning section inside it.
- The × uses --text-dim (2.4:1 on og before, 5.5 now).
- Phones: every button fills its row (a wrapped Dismiss no longer sits
stray at the left) and is 44px tall, and the × gets a 44px box.
- The title balances its lines, and the card matches the plain toast's
420px so a toast stacked under it lines up.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A hand-maintained src/web/public/security-notices.json carries warnings
about things outside Codeman that its users should act on. The first:
OpenCode's report of unauthorized access to its legacy Console, which
may have exposed provider API keys saved there.
- Pure core in constants.js (CodemanSecurityNotices): select() keeps the
notices that apply now (inclusive local-day dates, not yet seen, https
links, malformed entries skipped), and one naming a CLI only when
window.__codemanCliAvailable[cli] === true. Unknown means not
installed: a warning about software you do not have is noise. The CLI
id is data in the JSON; no code branches on it. plan() decides the
surface, so a load shows each notice once.
- An existing install on a new version gets the notice INSIDE the
release's update toast: the highlights as before, a warning section,
and the notice's link next to "See what's new". With no notice the
update toast is the plain one it always was.
- Everyone else (a fresh install, a same-version reload) gets its own
card in the toast stack: shield, "Security notice" eyebrow, title,
message, the link, Dismiss and the ×; amber-to-red accent bar, theme
tokens only (dark and light skins), full width on phones, an
opacity/transform entrance and none under prefers-reduced-motion,
role=alert.
- A notice is recorded as seen only when the user closes it, dismisses it
or follows its link, never when it appears. Storage blocked shows
nothing. The notice's own text is textContent and carries its own
zh-CN, so i18n.js leaves it alone; the card's own copy translates.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Copilot (`copilot`, npm @github/copilot) as a stock CLI entry with the same launch options as the other agent CLIs: model (--model), resume (--resume), continue (--continue) and allow-all (--yolo, clamped off for non-granted multi-user owners). Adds a resolver and GET /api/copilot/status probe, the agent-image package, Run-menu/mobile/logo entries, skill docs and tests.
The worktree API needs a front door that works from the place cases are
already picked. The toolbar case picker gains a third action row,
"Git worktrees…" (the phone case sheet gets a Worktrees button next to
Create New Case; no header button anywhere), opening one dialog per case:
- the repository's worktrees, with the managed ones (.claude/worktrees)
offering Open (start another session in it) and Remove…, an inline
confirmation with "Also delete its branch" (git branch -d) whose git
refusal is shown verbatim through textContent;
- a New worktree form (name, optional branch and start point) and a
"Start sessions with" picker over every enabled, installed run mode,
built from the registry catalogue as data, never an id branch.
Launching goes through run() with options.worktree and the same temporary
_runMode swap the custom-model entries use, so every mode keeps its own
path: claude and shell create through POST /api/sessions with the
worktree as workingDir, every other CLI through quick-start's worktree
field. Tabs are named w<n>-<worktree> and the Run button's mode is left
as it was.
Close Session offers "Kill & remove worktree" for a session that runs in
a Codeman-managed worktree; the removal waits for the server to confirm
the session is gone (closeSession now resolves true/false), and a dirty
tree keeps the worktree with git's reason in a toast that opens the
dialog. zh-CN strings and toast patterns for all of it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts resolved against #605 (and #602's test mock):
- CLAUDE.md Prompt uploads: #606's rewrite is kept and #605's bounded
workspace probe sentence follows the remote (SSH) refusal.
- test/routes/session-routes.test.ts: the remote-pane-history and
bounded-path-probe mocks are kept beside #606's _resetPasteRateBuckets
import, and both PRs' paste-image tests are kept.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict resolved in docs/api-reference.md: #607's prompt cache section and
#528's tabGroupId section are both kept.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
One conflict, in i18n.js SKIP_SELECTOR: master added '.tab-name' itself
(the same fix this branch made for zh-CN tab names), so master's line is
kept and this branch's duplicate comment dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Folder paths in the terminal and the response viewer are now links
(rooted or ~/ without an extension, relative with a trailing slash); a
click opens a grid of the folder's supported files, newest first, with
subfolder chips and a parent button. A tile opens the file preview,
which pages through the folder with ‹ › / ←/→; the preview of any file
gets a "Show folder" button.
Server: POST /api/sessions/:id/folders grants + lists a folder (local
fs or one ssh round trip for a remote case) under the attachment guard;
GET …/folders/:folderId/files/:name/(raw|preview|thumbnail) serves one
file by bare name through resolveServableAttachmentPath, so browser
requests still never carry a path. Grants live in their own small
registry so a big folder cannot evict the session's attachments. The
attachment raw route's body is now the shared serveServableRaw helper.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A session or web-tab ref in the owner tab layout may now carry
`focus: true`. "Add to Focus" in a row's menu (right-click on a web tab)
sets it; the vertical rail then draws a shortcut to that tab in a pinned,
collapsible "Focus" section at its top, while the row itself stays where
it is. A click on a shortcut selects its tab, a right-click or the menu
key offers "Remove from Focus".
Model: `TabRef.focus?: true`, parsed strictly (only `true` or absent) and
carried through normalization, every pure edit and the legacy-order
projection; `setTabFocus()` is the pure helper. TabLayoutService needed
no change and no route was added: the flag rides the existing
`PUT /api/tab-layout`. Browser: `copyRef`/`normalizeLayout` keep `focus`
the way they keep `placement` (the browser writes whole layouts, so a
dropped field would be erased on every save), `setFocus` is a named
operation through `createEditCoordinator` and replays on a 409, and
`focusRefs()` (also on `project()`) lists what the rail can draw.
The section is its own element in #tabRail above #sessionTabs, so it
works on the flat rail (no named groups) as well as the grouped one, and
shortcuts are never rows: no Alt+N badge, no tree item, no lineage
anchor, no drag target. It is a list with one tab stop and
Up/Down/Home/End between shortcuts. Collapse is per-device localStorage
under its own key. A shortcut whose session closed or whose web tab is
not open drops out; the server already prunes deleted refs. zh-CN
strings added.
A phone-only toolbar Attach button hands the agent a photo or a video with the
keyboard down. It owns its own file input, positioned over the button so iOS
anchors the picker popover to it; the picked paths land on the prompt as unsent
text, so Compose adopts them together with anything already typed and Use
terminal keyboard hands a single-line draft back the other way.
Videos take a second path on the same route: ?kind=video streams the file to
disk under MAX_PASTE_VIDEO_BYTES (1GB, env CODEMAN_MAX_PASTE_VIDEO_BYTES)
instead of buffering it, sniffs the container from the first bytes as they
arrive, drains a mislabeled body unwritten and unlinks on any failure. It draws
on its own 3/min per-(IP, session) rate bucket beside the image path's 30/min:
at 1GB each, 30/min would be 30GB of disk a minute. Without the flag the route
is byte-identical to the image-only version, same 50MB cap and same bucket.
One client classifier, _promptAttachKind (MIME first, then the name's
extension), drives every pick and paste surface: the Attach button, terminal
drop, the tile grid's drop, the Compose and paste-dialog pickers and the
clipboard handlers. A pick that lands while the tile grid owns the terminal
goes to the PTY rather than the parked main-terminal overlay.
Gesture control now moves tiles: with the tile grid open, pinch anywhere
on a tile and carry it onto another tile (they swap) or an empty cell (it
moves there); a session tab carried onto the grid joins it there. The
overlay asks tile-grid.js what is under the hand (tileAtPoint,
tileDropTargetAt) and drops through the mouse drag's own paths
(dropSessionOnTile / dropSessionOnSlot, so _reorderTiles stays the one
move path).
Detach Tiles (App Settings > Appearance, per device, OFF by default,
desktop only):
- a tile's header let go outside the browser window opens the session as
a pop-out (detachSession, which now takes an optional size and screen
position), the tile's size, near the drop point, after a 120 ms settle;
- dropped on another Codeman window's tiles it moves there: that window
docks it through the target's own drop and posts 'tile-adopted' on the
window channel, and only the window it was dragged from lets go of its
copy (a last tile goes to the welcome screen, never onto that session);
- a pop-out's title drags back onto any grid: the session is taken back,
the pop-out is asked to close and is released (stops answering
roll-calls; one a script cannot close says where the session went), and
its stale 'detached' answers are ignored for 2 s;
- a tile's menu offers "Open in a new window", and a hand that lets a tile
go outside the grid pops it out too.
With the setting off nothing changes. No server change.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Since the sidebar filter and the rail search share _applyTabListFilter(),
the sidebar's filter box also marks a .tab-cluster it emptied in the
by-case tab layout and rewrites its count. But the only rule hiding
.tab-cluster.tab-filtered-out was the rail-scoped one, so in the sidebar
the emptied box stayed painted with its label and a count of 0 while its
rows were hidden.
The sidebar rule now hides the marked case box as well. It stays scoped
to html[data-session-list="sidebar"], so a leaked class still cannot hide
anything on the header strip. An alerted row still counts toward its box
(the owner's call on #580), so a box holding a row that needs the user
never hides.
Tests: a unit test renders the sidebar in the by-case layout and checks
the emptied box is marked with a 0 count, that an alerted row keeps its
box on screen and counted, and that clearing restores the totals; a
stylesheet check pins the scoped selector; the browser test measures the
shipped styles.css in Chromium: the marked box is not painted in the
sidebar layout, an unmarked one is, and the header layout hides nothing.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A "Search sessions" box at the top of the vertical tab rail narrows the
list to the tabs whose name matches (case-insensitive substring; a web
tab matches by its title). It searches every group, collapsed ones
included: while a search runs the projection draws every group open and
the header will not toggle, and the stored per-device collapse state is
left alone. Groups with no match hide, an empty result says "No sessions
match", and the flat rail (no groups) filters the same way. Escape or
the clear button empties it; leaving the vertical orientation resets it.
It is a view filter only: rows get the same tab-filtered-out class the
sidebar filter box uses, through one shared _applyTabListFilter() over
the pure CodemanTabSearch matcher in constants.js. Grouping, order,
Alt+N badges and drag are untouched, nothing is persisted or sent to
the server. The sidebar keeps matching name plus working directory.
In the grouped tree, hidden rows and the headers of emptied groups leave
the roving walk and posinset/setsize, and the tab stop moves onto a
visible item. zh-CN strings added.
Review fixes for "place new, child and web tabs into groups".
- Spawned tabs follow their parent only with the new synced setting
spawnedTabsFollowParent (App Settings > Appearance > Tabs, off by default).
TabLayoutService.sessionCreated() reads it fresh through a
childrenFollowParent dep: off, a spawned session lands after its parent and
is marked manual in the same write; on, it follows until moved by hand. The
row menu shows the placement note and "Follow parent again" only when on.
"New session" in a group menu is unaffected. zh-CN label and a
Settings-Reference row.
- applyLegacySessionRank marks a child manual only when the requested order
splits it from its parent's block. A PUT of the current order, or one that
moves a family together, leaves every stored placement alone.
- The browser never echoes a create or delete through PUT /api/session-order,
with or without groups: the layout service already re-projects the order and
broadcasts it, and syncSessionOrder adopts it.
- The placement note in the row menu is plain text described by the menu, not
a focusable menu item.
- A tab that first appears inside a collapsed group briefly marks that group's
header.
- i18n skips .tab-name, so tab names are never translated.
- Tests: legacy-order cases for an unchanged order, a family reorder and a
split; service cases for the setting and for order PUTs; the scheduled
registration test now exercises register/undo; the grouped-create test binds
port 0; one route case runs through the real layout service.
New sessions, spawned child sessions and saved web tabs now land in tab
groups instead of always starting in Ungrouped.
New session in a group:
- The group menu gains "New session" (first item). It expands a collapsed
group and runs ONE launch with the current case and run mode; a launch
already in flight is reported, not queued.
- run({ count, tabGroupId }) threads the group through every launch path
(local POST /api/sessions, remote/docker and external-CLI
/api/quick-start). The count overrides the steppers for that launch only.
- Server: POST /api/sessions and /api/quick-start accept an optional
tabGroupId (Zod, 1-100 chars; null/empty is a 400). The routes pass it to
addSession(), and TabLayoutService.sessionCreated() places the session at
the end of that group in the SAME versioned write that first records it.
The session is added to the live map inside the owner lock (with a
rollback when the write fails), so no queued layout edit can commit it
first. The group is looked up in the creating owner's own layout, so an
unknown, deleted or foreign id is ignored instead of failing the spawn. An
explicit group is a hand placement: a child placed this way is manual.
- The create response carries the committed tabLayout (only when tabGroupId
was sent), adopted before the new tab is drawn. Responses without the
field are unchanged.
Child sessions (parentSessionId / X-Codeman-Parent-Session):
- A child nobody placed follows its parent: the server's existing
normalization already puts it after the parent's rows; the browser now
draws a not-yet-stored child there too (project({ parents })) and, while
groups exist, adopts the server's order instead of echoing its own append
back through PUT /api/session-order (which pinned every child manual).
- The row menu says where a child sits (follows, placed by hand, parent
closed, parent loop) and offers "Follow parent again" only to a hand-placed
child. A child whose parent is gone stands on its own and is never
re-adopted.
Saved web tabs:
- Web tabs are layout refs like sessions; openness stays per device. A
grouped web tab shows (and takes an Alt+N slot) only while open here and
reopens where the layout keeps it. Pinned by tests; no behaviour change.
Unchanged: the flat rail and header strip (markup, HTML5 drag, append and
save on create), the tree semantics and single tab stop, sessionOrder and
Alt+N, and every request that does not send tabGroupId.
Every animation setting now has its own App Settings section, right after
Appearance (owner: easier to find). It holds the Entrance Theme (the former
Entrance Animations row), Tile Animations, and an Open lab button that closes
settings and opens the per-surface lab (?animlab=1). Appearance keeps the skin,
identity and tab settings. New animation settings go in this section;
test/app-settings-structure.test.ts pins it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Tiles become the fifth entrance surface (data-tile-anim), switched on in App
Settings > Appearance > Tile Animations and OFF by default: the default is the
grid's own quick fade (`settle`), exactly as before.
A styled tile plays in two beats: its frame enters as it mounts (fly out of
its session tab, dealt from the Tiles button, CRT power-on, beam down from its
tab, cascade, pop, soft), and its screen then plays the terminal pane style of
the entrance theme when its first capture lands, through the same
html[data-term-anim] rules on .tile-body. Each style has its own exit when the
Tiles button closes the grid (back into the tabs, a CRT switch-off, ...).
Picking an Entrance Animations theme presets the tile style (new Launch theme:
tiles fly from the tabs); the theme readout ignores the tile row, so changing
it never shows "Custom". Frames move transform and opacity only (one fit and
one PTY resize per tile), a reload's restore always settles, and nothing moves
under reduced motion. The lab (?animlab=1) gets a Tile grid group, a cascade
order picker and in-place replay / close + reopen.
Also removes the terminal pane's `boot` entrance style (owner decision); a
saved `boot` falls back to off.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Since 1.40.0 every agent tab draws its CLI logo through the run-mode-dot
slot, and there was no way to turn that off. App Settings → Appearance →
Tabs now has "CLI Logos on Tabs" (showTabCliLogos), right after Tall Tabs.
- Modelled on tabTwoRows: a per-device display key in the server-settings
merge and an optional boolean in the .strict() SettingsUpdateSchema,
loaded and saved by the id appSettingsShowTabCliLogos. Default ON on
every device; only an explicit false turns it off (tabCliLogosEnabled).
- CSS only, no tab re-render: applyTabOrientation() and the pre-paint
script in index.html stamp html[data-tab-logos="on"|"off"] from the
same stored blob (so a reload never flashes the logos), and one rule in
styles.css hides .session-tab .tab-harness and .home-sessions-harness.
The rows space their children with flex gap, so nothing is left behind.
- A live flip resizes every agent tab with no render behind it, so
applyTabOrientation() then re-takes the strip's one-row wrap decision
(updateTabOverflowMode) and re-anchors the lines drawn from tab rects;
a header that changes height reaches the PTY through the terminal
container's ResizeObserver, as any header change does.
- Covered: the header strip, vertical rail, sidebar, grouped rail, ledger
and case clusters and phone chips (all render the same tab markup) and
the desktop home rail. Untouched: tile and split headers, the Run menus,
the welcome launchers. The phone overview rows, the command palette and
the tab action menu draw no logo. The shell's SH pill and the status dot
stay.
- zh-CN for the label and the description.
test/tab-cli-logos-setting.test.ts drives the real openAppSettings() and
saveAppSettings() in JSDOM (the saved PUT body must pass the schema), the
server-settings merge, the defaults on desktop and phone, the live stamp
and its re-measure without a re-render, the real pre-paint script (on,
off, the phone key, the catch fallback), the CSS rule's exact selectors,
and the translations.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Switches such as MCP server sync only unlock their controls once saved, and
Save closed the modal, so the user had to reopen Settings to continue. Apply
runs the same save, keeps the modal open and refreshes the dependent groups
(MCP sync, custom model endpoints, CLI management) in place.
Redraw (Ctrl+Shift+R and the header button) shows five literal toasts and a
size report on the main pane, a tile or the split's Pane B. None had a zh-CN
entry, including the two the final checkup's tile Redraw fix added, and
"Failed to restore terminal size" fell to the generic "Failed to" pattern,
which left English behind. They now translate, and the size report keeps its
numbers through a pattern rule. test/redraw-toast-i18n.test.ts reads the
toasts from restoreTerminalSize() itself, so a reworded one without an entry
fails.
Comments and docs that still described an older default:
- styles.css: the Tiles header button is no longer opt-in; it is on by default
on desktop and off on phones and coarse-pointer tablets.
- terminal-ui.js: the desktop branch of getDefaultSettings is no longer always
{}; what the comment needs is that it sets no copyStripMargin.
- docs/tile-grid-plan.md: the Tiles default bullet names the tablet default.
- docs/cli-registry.md: codex's footer is read in a two-row window since
codex 0.162's hint row, not from its last row.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Case picker: the "New or link a case…" and "Case settings…" rows that
replaced the translated + and gear buttons get zh-CN entries reusing the
buttons' wording, plus the list's "No cases match".
- App Settings, Bottom bar: the whole group translates as one (heading, the
four Git status rows with #543's max repositories and git timeout, and
their descriptions), so it never reads half English. The Git panel's two
button names, which the new "Git status" key reaches, read naturally too.
- Toasts: the three "Could not open a new window for this ..." errors and
the dictation-closed warning.
- Spreadsheet preview: "Spreadsheet preview failed (<status>)" gets a
pattern. Worker refusals map their error code to one user sentence each in
the renderer (the raw message goes to the console), feature ids read as
words (pivot tables, external links), and the notice bar translates each
item before the join; a number format's code passes through untouched.
The worker and core are unchanged, so their pinned strings and the
asset version hash stay as they were.
- Header Stats Style Tiles: the connection tile's value word reads in
Chinese through scoped "Connection tile: <word>" keys, never bare-word
keys ("retry" is also the orchestrator's Retry button, "LIVE" a resume
list badge). The indicator cache now includes the UI language, so a
language switch repaints it on the next update.
- Tile grid: the "Loading…" label was CSS content text the translator
cannot reach; it is now content: attr(data-loading-label), written through
the translator when the tile is built and each time it starts loading.
Tests pin every new string (zh differs, no English left, English unchanged)
and fail without these changes: the tile harvest sees the loading label and
the rename field, a CSS guard keeps words out of tile generated content, the
Bottom bar group, the case picker rows and toasts read from their source,
the connection tile across a language switch, and the spreadsheet error
codes, notice bar and status line.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Tab Layout "By case" at tablet widths (600 to 767px, getDeviceType's
'tablet'): the case boxes could shrink in the tablet's one-row scrolling
strip, so they squeezed and wrapped their tabs inside themselves and every
tab past a box's first line was clipped under the fixed 48px header. The
boxes now dissolve into the chip row as they already do on phones, which
keeps the tablet's own 40px chip geometry. The rule sits in its own
600 to 767px block, not the 768px tablet block, so the desktop path at
768px and up (boxes keep their width, the strip wraps box by box) is
untouched.
Needs-you tile pulse: the glow animated box-shadow on the tile itself, so
the whole tile (DOM-rendered terminal rows included, the whole stage when
zoomed) was repainted every frame for as long as a prompt waited. The tile
keeps its red border; the glow is now a static inset shadow on a
.tile--needs::after overlay (inset because .tile is overflow: hidden and
clips an outer one, z-index 3 above .tile-attach, pointer-events none)
and only its opacity animates. The entering-and-needs animation shorthand
is gone, since it would now blink the whole tile's opacity, and reduced
motion keeps the static ring and hides the overlay.
Welcome chips: the phone block set 36px, below the 40px that styles.css
gives touch screens, and it wins on every phone, so phones got shorter
chips than tablets. It now restates 40px.
Tests: the tablet widths and the 768px boundary in tab-clusters, the
opacity-only pulse overlay in tile-grid-motion, and the phone chip height
in run-mode-ui; each fails against the previous CSS.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Follow the keyboard: the menu's cap now uses var(--app-height, 100dvh)
instead of 100dvh. The viewport meta has no interactive-widget, so dvh does
not shrink for an on-screen keyboard, while MobileDetection always sets
--app-height to the visual viewport height and KeyboardHandler keeps it there
while the keyboard is up (body and .app already size the same way).
Subtract both safe areas from the cap: in the iPhone home-screen app the
phone header grows by the top inset and the toolbar sits above the bottom
inset, so without them the top of a full menu slid under the fixed header.
Add overflow-x: hidden. overflow-y: auto computes overflow-x to auto, so a
long nowrap custom-endpoint label showed a horizontal scrollbar that
touch-action: pan-y cannot pan (the same trap the file documents for
.run-mode-history).
Raise the toolbar while the Run menu is open, by adding
.toolbar:has(.run-mode-menu.active) to the existing popover raise rule. The
menu is trapped in the toolbar's stacking context, so on a touch device the
keyboard accessory bar (z 51) and the visible CJK input (z 52) covered its
last rows even when scrolled to the end. This follows the rule the case
settings popover and case combobox already use.
Reword the rule's comment: it claimed dvh follows the keyboard and that the
vh line is a fallback, and neither is true (a declaration carrying var() is
never dropped at parse time). The new text has no braces and no max-height
text, which the gate test's rule() slicer depends on.
Pin the fixes in the gate test (the --app-height and safe-area terms,
overflow-x: hidden, the toolbar raise) and retitle the cap test so it no
longer names dvh as the mechanism. The test now strips CSS comments before
reading the rule, since the rule's own comment names overflow-y: auto and
touch-action: pan-y and would otherwise keep those assertions green after the
declarations were deleted (checked by deleting them: the test now fails).
Drop .changeset/run-menu-scroll.md: it repeated the false dvh claim, and the
release writes one consolidated changeset at COM.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A claude tab drew no harness mark at all and every other agent CLI a
two-letter text pill (DS, CX, ...), so a claude tab read as "no harness"
next to its neighbours. Session tabs (header strip, side rail, sidebar,
phone chips) and the desktop home rail now draw the agent through PR
#532's run-mode-dot <id> slot, the id as data, the same mark the Run
menus and the tile and split headers use. The shell is not an agent and
keeps its SH pill; a CLI added through clis.json gets the slot's plain
dot instead of nothing.
The per-CLI tab pill colours and their light-skin ink overrides are gone
(the monochrome marks follow the tab's own text colour), and the logo
steps aside with the other adornments while a compact rail row renames.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Design B ("one primary + chips") won a two-judge panel over a launcher grid
and a command panel. Their defect list, fixed here:
- The tunnel spinner's track was the shared translucent white and vanished on
light skins; it now follows the link's own text colour.
- A running tunnel was only green text above its QR; it now shows as a quiet
green pill, and the resting link uses --text-dim (contrast).
- A long custom CLI label could push a horizontal scrollbar into the welcome
column: labels sit in a .welcome-label span that ellipsizes (still one text
node, so i18n.js matches it), and both buttons cap at the column width.
- Chips are 40px tall on coarse pointers (tablets reach this view).
- The OG primary's colours now name the toolbar Run rule they mirror.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The welcome overview drew every CLI as its own gradient pill (one colour,
gradient and glow per CLI, plus skin overrides that re-tinted three of them),
all at the same size with the same generic play icon, wrapping into an
unaligned cluster with Cloudflare Tunnel styled as one more launcher. Nothing
said which action mattered.
Now the screen has one obvious thing to press:
- A single primary button for the first AGENT in the registry catalog (Claude
Code on a stock install), in the accent fill the toolbar's Run button uses,
with the CLI's real logo on a small light disc (a brand mark straight on the
accent turns muddy) and the same translatable "Run <label>" text.
- Every other enabled CLI as a slim, uniform pill under it, in the Compact
header's language: control-bg surface, control-border, small type, the
logo from the shared run-mode-dot slot, the bare name, and "Run <label>" as
tooltip and accessible name. Catalog order, centred, wrapping when needed.
- Cloudflare Tunnel as a quiet text link under the launchers (same id,
handler and cloudflared gate; text colour carries the active and connecting
states), still directly above the QR it reveals.
The primary is chosen by catalog order and kind, never by an id, so with
Claude disabled the next agent takes the slot and a custom CLI listed first
gets it like any other. The buttons carry no per-CLI class any more: the id
travels only as data-mode and the logo slot, and all the per-CLI welcome
gradients and their skin overrides are gone. Everything is token-driven, so
it follows every skin; OG gets its own toolbar Run blue with light text
because its --accent-ink is an unused placeholder. Focus rings sit offset
from the fills, hover motion is off under prefers-reduced-motion, and the
phone rules (reached only with the phone overview off) span the primary and
keep the chips wrapping.
Tests: run-mode-ui pins catalog order across primary and chips, the
kind-based primary choice (Claude off, shell listed first, custom agent
first, shell only), the logo slot and absence of id classes, the token-only
CSS with no .welcome-btn rule left, and the tunnel link's place between the
launchers and the QR.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
timkjr