`execFile` signals the `git` parent only, so a fetch that times out can leave its http helper
still running, and on the interval that repeats every run with nobody watching. `runFetch` now
spawns `detached`, so the fetch and the helper it spawns share one process group, and the kill
is SIGTERM to the negative pid then SIGKILL `FETCH_KILL_ESCALATION_MS` later; the escalation is
not cancelled when the promise settles, because the caller is answered at the timeout while the
group is still dying. The output cap is kept, and the clone's slot queue is not needed here.
The tick is two passes: every enabled local session is collected by folder, a folder is due when
ANY session open on it is due, the folder is probed once for the group, and the run is published
to every session on it. A single pass decided by the order the sessions were read, so [long,
short] published only the short one and the 3600 s session's row never updated again while its
folder was fetched every 30 s.
`gitNonInteractiveEnv` writes BatchMode ssh as a default, not an override: `core.sshCommand` is
read inside the same slot and the same bound as the fetch it serves, and `fetchEnvFor` keeps the
repository's answer when it has one, because that is usually the setup that works on a machine
with several ssh setups. The `accept-new` host key it can write is stated next to the BatchMode
note: a prompt is stopped, a write is not.
The write claim is scoped to the Git panel and to the timer, with cloning and worktree management
named as the writes that happen when the user asked for them, and the zh keys sit with the group
of the UI surface their English string belongs to.
Tests: the process-group test proves the tree by group membership, because the helper is a
grandchild (`git fetch` runs `git remote-http`, which spawns `git-remote-http`) and because the
group is what the negative pid reaches, and it remembers each process once found instead of
re-scanning a group it had already emptied. The non-zero-exit test changed premises: `git fetch
--quiet` in a repository with no remote exits 0 on git 2.47.3, so resolving empty stdout there was
correct, and the case that has to reject is a remote pointing at a path that is not a repository.
The join test asserts after the run and does not await the request before the held run is
released, which would wait on the run the test is holding.
The scheduler is the part that runs with nobody watching, so it is decided per folder
rather than per session: sessions sharing a folder are the same clone and share one run
that both see, `inFlight`/`lastRunAt` are keyed by the resolved folder, the schedule is
stamped when a folder is picked instead of when its run starts, and a tick is skipped
while the previous one is still going. The click route joins a run already going for the
same folder rather than starting a second fetch in one clone.
The tick keeps ONE bound for the git processes of the whole run and hands it to every
folder, and bounds its folders with a bound of its own: the same semaphore cannot serve
both levels, because a folder holding a slot would then wait for a slot its own fetch
needs. Both bounds are `FETCH_CONCURRENCY`, so the ceiling is unchanged. The bound claim
in CLAUDE.md, the `Limiter` jsdoc and docs/api-reference.md now describes it as it is.
Before anything is fetched the folder is probed with the bounded path probe, so a case on
a mount that stopped answering is skipped and never touched.
The rest of the review: the hooks are named as they really are (`reference-transaction`,
`pre-auto-gc` through the maintenance a fetch triggers, config commands such as
`credential.helper`) and `FETCH_CONFIG_ARGS` turns maintenance and gc off for an
unattended run; the claim that an agent in the same repository is not disturbed is
replaced by the ref-lock collision it actually is; the click route publishes its own run
as `trigger: 'click'`; `autoSaveGitFetch` uses `_apiJson` so a 400 shows the error toast
and applies the returned settings; and the two wording fixes.
Tests: the scheduler pins one run per folder, the two bounds, the probe before anything
runs, and that closing the session holding the override keeps the folder while another
session is still open on it; the route test pins the click publish and the join, asserting
the join before the held run is released — releasing first lets the run finish and clears
the lane, so the joiner would be entitled to its own fetch and the test would pass for the
wrong reason.
Fetch is the only git command Codeman runs that writes, and the only one that runs a
repository's own fetch-post hook, so it stays behind a click and off by default. The Git
status window's header row gains Fetch; App Settings -> Bottom bar gains the switch and
the interval, synced because the scheduler acts on them, and Session Options -> Git
overrides both per case. The scheduler reads settings fresh each tick, times the interval
from the start of a run, never overlaps runs, and re-checks the Docker and remote rules
every tick before any git runs. Nothing but remote-tracking refs moves: HEAD, the index
and the working tree are proven unchanged against real git while origin/main advances.
Tests: src/git-fetch.ts and the scheduler, the per-case settings route, the synced/display
setting split, the two new i18n rows, and the Fetch block of the Git status browser suite.
The rename lock is checked once, in the Session constructor, but a session
reaches the server's map (where the rename route builds its list of open
sessions) only later, after the create awaits the owner's layout lock and a
fresh settings read (and, for POST /api/sessions, inferLocalCaseName). A
rename in that gap neither listed nor stopped the session, moved the folder,
and the create then registered a session whose pane starts with
`cd "<old path>"`, skipping the 409 requiresStop / stopSessions guarantee.
- case-rename.ts keeps a record of sessions constructed but not yet
registered (`noteCaseSessionStarting` / `caseSessionSettled` /
`isCaseSessionStarting`), with a 30 s TTL for one that never registers
(a failed create, a one-shot prompt), swept on every note and check.
- The Session constructor records itself (local sessions only, as the
route ignores remote ones); registerSessionWithLayout()'s register
callback, the boot-restore registration and stop() settle it.
- The rename route answers 409 CONFLICT with renameCode BUSY ("A session is
starting in this case") for a folder move while one is recorded at or
under the folder. The check runs in the same tick that takes the lock, so
every interleaving is either refused here or by the constructor. An
alias-only rename is not refused.
A create whose path was validated before the move but whose Session is
constructed after it is still the ordinary check-then-use race of any
create path; CLAUDE.md now says so instead of "nothing starts mid-move".
Tests: unit (record, settle, stop, TTL), route (BUSY, then requiresStop once
registered; alias-only unaffected) and an end-to-end WebServer test that
holds the create between constructor and registration (it fails without
the route check: the folder moves under the session).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
#689's density steps hide every `.header-system-stats .stat-label` once the
toolbar is narrowed, and #692's readings (GPU, VRAM, GPU MHz, CPU MHz) have
nothing else naming them: at tight, dense and tiny the header showed "40%"
beside CPU's "12%", "3.2G" beside MEM's "7.9G", and two bare "1800 MHz" /
"4200 MHz" with no way to tell the GPU clock from the CPU one. At Compact +
tiny, where values are hidden too, the two clocks (no ring) were left as
0-px items that still took an 8 px flex gap each. Neither PR shows it alone.
- The four host items carry `stat-item--host`, excluded from the density
label hide, so they keep their labels at every step.
- `stat-item--ringless` (static on the two clocks, toggled by
`_updateHostSensors` on VRAM while its total, and so its ring, is unknown)
is hidden at Compact + tiny instead of staying an empty item.
Tests: the browser test drives every density in all three styles against
the real markup and styles.css (it fails on the previous files), and the
unit test pins the VRAM ringless toggle.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict in src/web/routes/session-routes.ts (the import block) resolved
by keeping both sides: #680's claudeProjectDirName import stays, and the
fastify import takes #690's form without FastifyReply, since #690 moved
abortOnClientHangUp (its only user here) into route-helpers.ts.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict in config/test-suites.ts resolved by keeping both sides: #689's
header-divider and #692's header-host-sensors browser tests are both
listed in BROWSER_TEST_GLOBS.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict in docs/architecture-invariants.md resolved by keeping both
sides: the hollow-pane paragraph carries #681's unloaded-scrollback
sentence, #698's Codex-menu rewording and #699's notch rewording (a
word-level three-way merge; the three edits touch disjoint sentences).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts resolved by keeping both sides:
- src/web/public/terminal-ui.js (_maybePageCliTranscript): #698's
Codex-menu consume check sits right after the open-dialog consume
check (its sibling, as the docblock lists them), and #681's
unloaded-scrollback fall-through (paneHistoryLines > 0) follows it.
- docs/architecture-invariants.md: the hollow-pane paragraph carries
#681's unloaded-scrollback sentence and #698's menu rewording.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The new-session row's agents now go through _runModeAvailableForCase (session-ui.js), the rule extracted from _refreshRunModeAvailability, for the case the row launches in: a Docker case offers what its container has (live probe, else availableModes, else ungated), so a container-only Run mode is offered and is the row's default again.
The default is resolved per render (pick, else the Run button's mode, else the first offered), so a query that moves the row to another case starts on the Run mode when that case offers it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Reserving a slot per request refused a correct password with the slots it had
filled itself: after a restart the browser replays its cached Basic header on many
parallel requests. Identical credentials from one IP now join the verify already in
flight for them (keyed on a SHA-256 digest), skipping the gates and its scrypt cost.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
cleanup-state keeps the agent inbox of a removed record whose tmux session the multiplexer still lists (a detached pane the next boot re-adopts under the same id); test and architecture-invariants note added.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
In multi-user mode the per-IP and (username, IP) gates read their counts before
the verify and wrote them after it, so a concurrent burst from one IP passed both
on one stale read (29 wrong guesses plus the right password logged in). A request
that passes both gates now takes its slot before the await; a success clears it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude history merges, never overwriting, into a project directory a deleted case of the new name left behind, instead of staying orphaned under the old key.
The free-target pre-check also refuses a dangling symlink (lstat), so stopSessions no longer ends sessions before a 409 EXISTS.
The rename dialog says stopped sessions are closed (their tabs go away) and, after a failed rename, how many were already closed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Keep the Run button's mode when fewer than two agents are offered (_commandPaletteAgent), so a Docker case whose host offers only Shell still starts the container agent the Run button shows; pinned by a new palette test.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
terminal-ui.js: the _maybePageCliTranscript JSDoc names PAGE_KEY_NOTCH_DEBT_MS as the stretched gap after a notch-sized opener
terminal-scroll-routing.test.ts: the notch-opener test comment uses the real numbers (36 rows, 14 rows owed)
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Re-read the per-IP failure count after the scrypt await, so concurrent failures from one IP are all counted (regression test added).
Reword the (username, IP) bucket comment: it grows with failed verifies per pair, not no faster than userFailures.
Reword the verify-first test comment: only the per-username bucket never denies a correct password.
Correct docs/multi-user-plan.md: the per-username bucket does not stop cross-IP brute force; the per-(username, IP) bucket caps verified guesses.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Boot prune keeps the inboxes of sessions on the reboot-restore offer (their records are already pruned and a rebuild reuses the id), with a case in test/agent-inbox-server-wiring.test.ts.
docs/wiki: post, inbox and ack in the codeman agent command block of Driving-Codeman-From-An-Agent, and "Keep agent inbox across restarts" in Settings-Reference.
codeman agent inbox prints message text through terminalSafeText (ANSI stripped, other C0, DEL and C1 controls shown as \xHH); --json stays as stored.
Shutdown flushes the inbox snapshot again after app.close(), for a post that lands after the first flush.
POST /api/cleanup-state drops the inboxes of the records it removes.
InboxPostSchema derives its fence from MAX_MESSAGE_BYTES instead of the literal.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Multi-user: add a (username, IP) failure bucket checked before verifyPassword, capped at AUTH_FAILURE_MAX, with the same decay as the other buckets; the per-IP pre-gate stays at AUTH_IP_FAILURE_MAX and the per-username bucket stays after the verify
A correct password now also clears that account's (username, IP) bucket, beside the IP and per-username buckets
The new bucket is disposed on server stop like the others; the comments above the gate and the constants' JSDoc describe the three buckets
Tests: 10 wrong then the correct password from one IP is a 429, the same account logs in from another IP, another account behind that IP is unaffected, and a correct password clears the pair bucket
test/multiuser-auth.test.ts: the spray test loops to AUTH_IP_FAILURE_MAX instead of a literal 50
Reworded the rate-limit lines in auth-config.ts, security-architecture.md, README.md, README.zh-CN.md, wiki/Security.md, endpoints.md (plus the plugin mirror), CLAUDE.md and architecture-invariants.md
docs/wiki/Remote-Access.md: add the multi-user note to the tunnel page
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
pageKeysForGesture comment (terminal-ui.js:218): the gap stretches to PAGE_KEY_NOTCH_DEBT_MS after a notch-sized opener, not only PAGE_KEY_DEBT_MS
pageKeysForGesture comment (terminal-ui.js:286): a repaid debt ends either lifetime, not only the one-second one
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Clamp the stored toolbar width to MIN_WIDTH in apply() and step the arrow keys from the width on screen, so a drag to the window edge or a held ArrowRight no longer stores a negative width or leaves an ArrowLeft dead zone (browser test added)
Drop Escape as a reset key on the handle: the global capture-phase Escape handler already closes every panel on it (static pin added)
Say in the changeset, the wiki and the densityFor comment that the percentages go at the narrowest step in the Compact style only, and drop Escape from the changeset
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
palette agent switch: aria-hidden on .command-palette-agent, arrows lose role="button" and aria-label (no nested buttons in the row)
i18n: zh-CN entry for the "Agent for the new session (Left/Right to change)" tooltip
docs: Keyboard-Shortcuts Ctrl+K row says Left/Right change the agent on the New session row
test: pin the aria-hidden switch and the zh-CN tooltip entry in command-palette-ui.test.ts
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
_notePaneHistory JSDoc names the responses it skips (an error envelope on any path, a refresh that lost its owner, a pull whose select generation moved)
selectSession records the pane count only for a non-error envelope (capture.json?.success !== false), pinned in the static guard of test/pane-history-memory.test.ts; the two invariant paragraphs now name the tab switch beside the refresh and the pull
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Restore settings.json (caseOrder, lastUsedCase) when linked-cases.json cannot be written, with the rollback test extended
List Claude Code's per-project ~/.claude.json entry as not migrated in Core-Concepts.md and CLAUDE.md
Say in the 500 that the folder is now at the new path when moving it back fails
Describe the rename dialog's folder checkbox in Core-Concepts.md, carry stoppedSessions on errors, count 5 case SSE events
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
docs: document the SSE connect timeout next to the staleness watchdog in src/web/CLAUDE.md and docs/architecture-invariants.md (clear order, replaced-EventSource guards, offline handler leaves the timer)
test: rename the offline case to "connectSSE() while offline cancels the pending timer" so it names the path it drives
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
findPersistedSessionOrFail now requires req (dropped the `?` and the dead `req &&` guard), like findSessionOrFail
The AST test in test/ownership-scoping.test.ts pins both declarations and asserts req's type is exactly FastifyRequest
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- codeman agent post: accept text that starts with "-" (markdown from a
file), --json and -h stay options.
- DELETE /api/sessions/:id on a persisted-only row drops the inbox a detach
kept.
- inbox --wait: wait.ended is exit 3 only when the session list no longer has
the session; a restart or detach ending the wait is exit 2 (wait again).
- A read whose client hung up during ?wait= marks nothing seen.
- InboxPostSchema bound is 4x the byte cap, so every oversize message gets
the store's "post a file path" answer.
- Store: restore sorts oldest first; the TTL sweep checks every message,
not only the first.
- Docs: admins can act as any session of the receiver's owner (now tested
for admin and non-admin); a peek with ?wait= does not block; exit codes.
- Tests: partial PUT /api/settings keeps persistence on.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A coordinator can leave text for a worker without typing into its pane.
- Store (src/web/agent-inbox.ts): read until ack by id, seen only for the
receiver, 16 KiB/message, 512 KiB + 200 messages per inbox, full = 409
CONFLICT (never drops the oldest), 12 h TTL from each message's createdAt.
- Routes (routes/inbox-routes.ts): POST/GET /api/sessions/:id/inbox
(?wait= parks while nothing is unseen), POST .../inbox/ack (receiver
only, 403 otherwise), GET /api/agent-inbox/summary (owner-scoped counts,
not in toState()). Caller = resolveParentSessionId().
- Inbox waiters are the wait registry's third kind: same caps, ended by
cancelAll/cancelEverything.
- Opt-in snapshot (agentInboxPersistEnabled, synced, default off):
agent-inbox.json via dataPath(), 0600 tmp+rename, off deletes it, boot
prune only after a successful restore. Dropped on delete, kept on detach.
- CLI: codeman agent post | inbox [--wait] | ack, INBOX column in ls.
- waitCapacityResponse/abortOnClientHangUp moved to route-helpers.ts
unchanged.
- Docs: api-reference, README, CLAUDE.md, architecture-invariants, skill +
plugin mirror.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Single-user mode has no per-username bucket, so its per-IP bucket is the
only limit on guesses against the one password, and behind a tunnel every
client shares 127.0.0.1. Put it back on AUTH_FAILURE_MAX (10).
AUTH_IP_FAILURE_MAX (50) now gates only the multi-user per-IP pre-gate,
which runs before the scrypt verify and so refuses even a correct password;
the per-username bucket still caps each account at 10.
Move the headroom test out of the single-user suite and add a multi-user
test that sprays wrong passwords across usernames (9 each) and expects 401
for the first 50, then 429 for the 51st and for a correct password.
Update the docs that still described 10 per IP for every mode, and resync
the plugin mirror of the codeman skill.
The palette's "New session" row now shows the agent it will start and
lets Left/Right (or the row's arrows) switch it. The agents come from the
injected CLI catalog, filtered to enabled and installed entries, so no CLI
id list lives in the palette. The pick is a one-shot launch through run()
with a temporary _runMode swap: the Run button's mode is left unchanged.
findSessionOrFail took `req` as optional, so the quiet default was the
unscoped lookup: a route that forgot to pass it compiled cleanly and, in
multi-user mode, returned another user's session. `req` is now required,
and a caller with no request in flight must use the explicit, greppable
findSessionUnscopedOrFail instead.
Every current caller in src/ already passes req (verified by grep and
tsc), so behaviour is unchanged; the new helper has no production
callers and exists so the next request-less caller does not make `req`
optional again.
Tests pin the unscoped helper's behaviour and assert, from the source
AST, that `req` is a required parameter (tsc does not typecheck test/).
One AUTH_FAILURE_MAX (10 per 15 min) gated the single-user per-IP
bucket, the multi-user per-IP pre-gate, the per-username lockout and the
hook-secret bucket. Clients sharing one egress IP (NAT, a tunnel, an
automated client retrying) were throttled after 10 failures in total.
Add AUTH_IP_FAILURE_MAX = 50 and use it for the two per-IP login buckets
only. The per-username lockout and the hook-secret bucket keep
AUTH_FAILURE_MAX = 10, so guessing against any one account, or against
the hook secret, is no easier than before.