Merge-time fix for #666. `recordHookEvent()` ran for every `stop`, the run
summary files a `stop` as a warning, and the Away digest lists warnings under
Needs Attention, so each keep-alive nudge added a row there and to the
session's Summary timeline. The hook route now skips the run summary while
`keepAliveReason` is set (the keep-alive turn's `stop` and `idle_prompt`).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Only a human spends an idle alert, but the keep-alive turn resolved an unseen one three ways: its working transition, its stop hook, and its own idle prompt replacing the item with a pre-acknowledged one. While the turn runs, a pending idle item is now left exactly as found, the page's stop handler returns on the keep-alive reason before clearing hooks or raising Response Complete, and session:working/session:idle carry keepAlive so the stuck-detection timer neither restarts nor re-arms.
The window that marks the turn closes on its own idle prompt or any other submit instead of a fixed three minutes, which a slow turn's idle prompt (sent a minute after the turn ends) could outlast. The service keeps the default and cap in memory, read through a strict reader so a mid-write read is retried rather than kept, and the cap is clamped before the strict settings save.
Claude Code lets a subscription's one-hour prompt cache expire after an hour idle, and the first turn back re-writes the whole conversation at the cache-write rate; nearly every gap over an hour goes cold, while the saving is concentrated in gaps of one to four hours. Codeman now sends one short keep-alive turn five minutes before the expiry Claude Code reports on its statusline, so the next real prompt still reads the conversation from cache, and stops two hours (configurable) after the last real prompt.
Codeman owns the idle policy for these sessions, as agreed in Discussion #554: a launch with keep-warm on also carries idleCompaction: false in its one --settings JSON, so Claude Code's own idle compaction cannot replace the conversation with a summary a minute before the nudge. It is decided once per launch (keep-warm on, the statusLine exporter injected, Claude Code 2.1.290 or newer, an unknown version fails closed like --name), recorded on the mux record, and picked up by any relaunch; a launch with keep-warm off is byte-identical. A session switched on after launch is kept warm best-effort and the readout says so.
Every guard lives in one pure rulebook: the opt-in (an agent-spawned session does not inherit the app default), a launch that reports cache state, a warm 1h cache with enough tokens at stake and no compaction this gap, a live pane, no usage-limit pause, no respawn, Ralph, task or waiting agent, idle, no open dialog, an empty composer and no recent keystroke. The nudge is a submit and moves lastSubmitAt, which the response viewer's conversation correlation needs; the cap counts from its own persisted lastRealPromptAt instead. Read My Mind drops the exact nudge text, and the turn's stop hook and idle prompt open pre-acknowledged so nothing alerts. The last cache report and the clock survive a restart, so the timer re-arms.
GitHub Copilot CLI (`copilot`) becomes a run mode: Run menu, welcome
screen, cron and CLI management once it is installed, tmux-backed like
the other agent CLIs, working/idle and the model read off its footer,
launch options through `copilotConfig` (model, resume, continue, the
multi-user-clamped allowAll), Custom Model Endpoints via Copilot's BYOK
variables, MCP sync of its mcp-config.json, a status probe, and the
`codeman agent` verbs (spawn waits for its composer, read returns its
last answer).
The plan-usage quota row that earlier rounds carried was split out on
review and is not part of this merge.
Merge-time commits on top: the wider COPILOT_* clamp and the zh-CN
README rows (maintainer), the Docker sign-in docs, divider rows inside
an answer kept by `agent read`, route tests for the screen-read
last-response branch, and doc drift (Past Sessions, wheelForward JSDoc,
COPILOT_/OMP_ in the env prefix lists).
Verified before merge on Copilot CLI 1.0.98: injected keystrokes,
bracketed paste and Enter reach the TUI in tmux (github/copilot-cli#4180
does not reproduce), a shell tool call completes inside tmux (#4223 does
not reproduce), and a session driven through this branch answered over
send-and-wait.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
GET /api/sessions/:id/last-response reads a copilot pane through
capturePaneText, since a repainting full-screen TUI streams cursor moves
rather than lines, and nothing pinned that at the route: had the branch
stopped capturing, copilot would quietly have been segmented off the
fused stream again. Three app.inject cases with a stubbed mux: the
captured screen is what gets segmented (the stream text never shows),
a null capture falls back to the buffer, and a line-streaming mode
(opencode) never asks for the screen. The first two fail with the
capture switched off.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Pins the user-facing fix end to end: POST /api/cases with a path two levels
down returns 200, lands in the linked-cases registry and is scaffolded.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Copilot (`copilot`, npm @github/copilot) as a stock CLI entry with the same launch options as the other agent CLIs: model (--model), resume (--resume), continue (--continue) and allow-all (--yolo, clamped off for non-granted multi-user owners). Adds a resolver and GET /api/copilot/status probe, the agent-image package, Run-menu/mobile/logo entries, skill docs and tests.
An Excel or Notepad CSV/TXT export (UTF-16 with a BOM, or Windows-1252) was refused as "File bytes do not match declared type", which reads like a corrupt file. Name the encoding and tell the user to save it as UTF-8.
docs/multi-user-plan.md lists the system operations as admin-only, but
these routes had no role check, so any signed-in regular user could run
them in multi-user mode:
- POST /api/auth/revoke with an empty body cleared EVERY login session on
the server, every admin's included. A non-admin now revokes only their
own logins, and a named sessionToken only when it is one of theirs.
- POST /api/system/update (update and restart the server for everyone),
POST /api/system/span-displays (a window on the server's desktop),
POST /api/tunnel/qr/regenerate (clears every user's pending QR login
code) and POST /api/cleanup-state (drops every user's stale session
records) now answer 403 FORBIDDEN to a non-admin.
- GET /api/tunnel/info lists only a non-admin's own logins (it showed the
address and browser of every user's sessions).
Admins and single-user mode are unchanged. The tunnel panel's Regenerate
QR button no longer reports success for a refused request.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
GET /api/settings returned the whole settings.json to every signed-in user.
An admin's App Settings save stores the Deepgram key there
(voiceSettings.apiKey), so any regular user could read it, and their
browser copied it into its own voice config and dictated on the admin's
account. caseOrder and lastUsedCase also named the admin's cases.
In multi-user mode a non-admin now reads the file without those three
(settingsForNonAdmin). Admins and single-user mode get the file as it
is. Pinned by route tests and the live multi-user test.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- test/routes/system-routes-settings-admin-only.test.ts (app.inject): a
non-admin PUT /api/settings is 403 FORBIDDEN before the body is parsed, and
nothing is written, no watcher toggled, no tunnel started, no history limit
set; the same gate on PUT /api/execution/model-config, PUT /api/config and
PUT /api/cases/order; admins and single-user mode write as before; GET stays
readable.
- test/settings-admin-only-multiuser.test.ts (live server, port 0, real
multi-user auth): settings.json is byte-identical after a non-admin's PUTs,
and a non-admin's quick-start or Ralph loop no longer records lastUsedCase.
- test/settings-admin-only-ui.test.ts (real index.html in JSDOM): a non-admin
App Settings save sends no PUT, keeps per-device keys, keeps synced keys at
the server value, and toasts once only on a real synced change; the
background writes are skipped; admins still PUT; zh-CN for both toasts.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
feat(codex): raise codex approval, question and trust dialogs as BLOCKED
Conflict resolved against #634 in src/session.ts _probePaneWorking():
#624's assignment (a dialog on screen is never work) is kept, and #634's
trust-dialog verdict block (log the hold once, remember the reading)
follows it, before _readWatching().
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Docker rule was applied to the CASE folder and its common git dir
only. A Docker case can be linked to any host folder, including a managed
worktree (`<repo>/.claude/worktrees/<name>`), which is a natural setup for
running one of the parallel agents in a container. Removing that worktree
from the local case's dialog, or through Close Session's "Kill & remove
worktree", ran `git worktree remove`, which runs a git status INSIDE the
tree (container-written files, checkout filters on this machine) and then
deletes the whole tree, ignored files included, while the container still
mounts it. Reproduced on an isolated instance: DELETE answered 200 and the
Docker case's workspace was gone.
That contradicts the invariant the PR itself documents in CLAUDE.md ("git
never runs ... at or inside a Docker workspace"). removeCaseWorktree now
refuses (400) a present worktree that is, sits inside, or holds a Docker
case workspace, before any git runs; the DELETE route passes the Docker
roots it already reads for the case check. A worktree whose folder is gone
is unaffected (git only drops its record there). Unit and route tests
cover both directions and an unrelated Docker workspace; docs updated.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The wiki said .codeman-uploads/ is the one path "a local agent, a container
and a remote host all see the same way", two sentences after saying uploads
are refused for remote (SSH) sessions. Only a local agent and a Docker case
(workspace bind-mounted at the same absolute path) share it, which is why the
route refuses remote sessions; say that.
The same paragraph said every image goes in after a re-encode on the device,
but _normalizeImageForUpload passes a GIF through untouched to keep its
frames.
CLAUDE.md and a test comment described the image fallback as behaving
"as before 1.36", a release that never existed (1.35.0 was followed by
1.40.0). It means the image path as it was before this change.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`GET .../wait` answers `blocked` at once for a codex pane showing a dialog,
because a screen-read dialog is a level the server is still reading. The
duplicate branch of `POST .../input` (a tagged retry after a dropped
connection, answered from current state) still used the plain
`currentSignalFor()`, so a retry with `wait: "blocked"` on a pane the first
delivery had already blocked waited out its whole timeout for an edge that
had passed. It now uses `currentSignalForWait()` like the GET route; a
caller that asked only for `idle` still gets `idle`.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
With Codeman Agent Skill on (agentSkillEnabled), every session create
writes the skill into the folder the session runs in, so a session in a
worktree leaves an untracked .claude/skills/codeman/ (claude) or
.agents/skills/codeman/ (codex, gemini and the rest) behind. git then
refuses `git worktree remove` for that worktree forever, and an agent
running `git add -A` there would commit Codeman's skill into its branch
(reproduced: the worktree's status showed "?? .agents/" and
"?? .claude/").
A create now excludes <skills dir>/codeman/ next to the hooks file, for
every skills folder the registry names (capabilities.agentSkillDir,
read at call time by the route and passed in as data, so no CLI id is
branched on). Like the other lines it is only added when git does not
already ignore the path, and only to the repository's local
info/exclude.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
When a managed worktree's folder is deleted by hand (a user in a file
manager, an agent's rm -rf), git keeps its record and lists it as
prunable. Codeman then had no way out: the dialog showed the row as
"missing" with no action, DELETE answered "No worktree named ...", and
the name could never be used again (the branch still existed, and with
another branch git refused "a missing but already registered
worktree"). Reproduced on git 2.43; git's own `git worktree remove` on
the missing path drops the record with exit 0.
Removal (only removal, never a session start) now accepts a worktree
whose folder is gone when git lists it at exactly the managed path, as
prunable or locked, and no component on the way is a symlink or a file.
The live-session and lock refusals still apply. The dialog offers
Remove... (not Open) on such a row, with a note saying what it does.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The removal guard and the per-worktree session count compared each
session's workingDir lexically against the worktree paths git lists,
which are real paths. POST /api/sessions stores workingDir as it was
spelled, so a session started in a worktree of a linked case whose
folder is a symlink (a repository on another disk, macOS /tmp, a
symlinked cases folder), named through that link, counted for no
worktree, and DELETE /api/cases/:name/worktrees/:worktree removed the
folder under the running agent (reproduced: 200 instead of 409).
Each session folder under the case path is now respelled onto the
repository's real top level before the comparison (respellUnder, pure
and lexical, so no filesystem call per session).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A codex dialog the session now reads off its screen gets exactly what a
Claude `permission_prompt` hook gets, so every surface that already handles
that event needs no second path: `web/screen-blocked.ts` turns the session's
`blockedChanged` edge into the `blocked` wait signal, an Approvals Inbox
item, the `hook:permission_prompt` broadcast (with `source: 'screen'`), web
push and webhooks, and a run-summary row. That lights the red "needs you"
tab alert and desktop notification, the phone overview's NEEDS YOU row and
the TUI. When the dialog leaves the screen the item it opened is resolved,
and `approval:resolved` clears every client.
It is an ALERT and never a keystroke, following #610's shape for DeepSeek:
the item is `answerInTerminal`, push carries no `approvalId` (so no
Approve/Deny), and the answer route refuses it. The dialog was read from a
screen the agent writes most of, so a forged match must cost a false alert
and nothing more. The message every surface shows is built from the CLI's
registry label, never from the dialog's text. The item gets no `capture`
callback, only its frame as context, because the inbox's option parser and
staleness sweep are shaped for Claude's dialogs and the session owns this
item's lifetime. A CLI whose hooks report blocked gets nothing from the
screen, so declaring both could never alert twice.
The answer route now checks `answerInTerminal` BEFORE its hooks gate and
names the CLI: a codex session has no hooks, and "Session mode cannot have
pending approvals" would be false about the item the caller holds.
Wait signals: `blocked` is available where hooks report it OR a CLI declares
`blockedLine` (`blockedSignalAvailable()`); `stop` stays hooks-only, since
nothing on a screen says a turn ended, so `until=stop` on codex is still a
400 (now suggesting `idle, blocked or exit`). A screen-read dialog is a
level the server keeps reading, so a `GET .../wait` that asks for `blocked`
while one is up answers at once; a caller that asked for `idle` alone keeps
getting `idle`. The MCP and `codeman agent` help text say so.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Sessions in one case share its folder, so several agents on one repository
edit, build and commit in the same checkout and step on each other. A case
whose folder is a git repository can now keep worktrees under
<repo>/.claude/worktrees/<name> on a new branch (default worktree-<name>),
which is Claude Code's own --worktree layout (measured in Claude Code
2.1.296) and the one Codeman's worktree pill already recognizes.
New module src/git-worktrees.ts (pure name/branch gates, worktree list
parsing, exclude text; IO through an injectable runner) and routes
GET/POST /api/cases/:name/worktrees and
DELETE /api/cases/:name/worktrees/:worktree:
- git runs as argv with -- before paths, non-interactive env, process
group timeouts, --no-optional-locks on reads; names are gated before
git and confirmed with git check-ref-format --branch.
- Only <repo>/.claude/worktrees/<valid-name> is created or removed; every
path component is lstat'ed and realpath-checked, so a symlinked .claude
cannot redirect a create or remove outside the repository.
- /.claude/worktrees/ (and the per-workspace hooks file Codeman writes,
which otherwise blocks git worktree remove) go to the repository's
local info/exclude, never a tracked .gitignore.
- Removal is git worktree remove WITHOUT --force, refused while a live
session runs inside; branch delete is git branch -d, never -D.
- Docker and remote cases are refused with a 400, and git never runs for
a case at or inside a Docker case workspace.
Starting a session reuses the existing create paths: quick-start takes
a worktree name (validated, local cases only) and runs hooks, the skill,
the model override and the session itself in the worktree;
POST /api/sessions takes the worktree as workingDir. The unified session
list names the worktree of a live session from its folder layout, so a
codex or shell session in one gets the worktree pill too.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
last_miss_cause.causes was z.array(z.unknown()).max(20), so a statusline
payload carrying more than 20 causes failed validation and lost the
whole post: plan usage, model, cache and the footer with it. Truncate
to the first 20 with a preprocess that slices before the array
validates, so an over-long array costs one bounded slice rather than
per-element work across every entry.
The status-telemetry route gated the model report on
capabilities.statusLineTelemetry but stored the prompt-cache report for
any session mode, even though both ride the same statusline payload the
exporter POSTs. Gate the prompt-cache store on the same capability so a
CLI with no statusline exporter no longer carries prompt-cache state it
never actually reported.
The Attach button, the Compose and paste-dialog pickers, terminal drop and the
clipboard now take documents beside images and videos: the office formats
pdf/docx/pptx/xlsx/zip and the text family txt/md/csv/tsv/json/log/yaml/yml/xml.
A document is admitted by its name's extension (the MIME a phone attaches to a
.md is anyone's guess), buffered under the same 50MB image cap, and judged on
its bytes by the same fail-closed sniffer: a magic-number signature for the
binary formats, UTF-8 with no NUL byte for text. It is saved under a sanitized
stem of its name, so Q3 report.pdf is findable as paste-<ts>-<hex>-Q3-report.pdf.
sh/py/js/html are refused by name with a clear 400. That is a scope choice, not
a security property: file-raw already serves non-media text inert, so this keeps
the server from storing what it would serve or an agent could run, and html and
svg are the ones deliberately kept out. One client classifier (_promptAttachKind)
now returns image, video or document, and the server's dispatch mirrors it: an
image MIME wins whatever the name says, a document extension takes the document
branch, and a foreign extension with no image MIME is refused only after the
image sniff fails, so nothing the image path accepted by its bytes is lost.
#604 makes `~/` links clickable and passes them through unchanged, since only
the server knows the session host's home. The html-view mint read `~/x.html`
as workspace-relative and answered 404, so the preview fell back to the
source view. It now expands `~/` against this host's home, as the attachment
route does, and refuses it in a Docker case (that `~` is the container's)
with the same message as the attachment and folder routes.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts resolved against #604, #606 and #601:
- constants.js: the rooted link pattern takes html-md's `markdown` and
`html?` with #606's m4v/ogv; #604's relative pattern gets the same list
(link-provider-regex pins the two equal); #604's findFilePathLinks /
folder helpers and html-md's rendersAsPage() are both kept, and
window.CodemanFilePaths exports all of them.
- terminal-ui.js: #604's resolved `target` (relative, ~/ and folder links)
now also goes through rendersAsPage(), so every link kind routes .html to
the page preview; .md routes there through FILE_PREVIEW_EXTENSIONS.
- CLAUDE.md, api-reference, architecture-invariants: both sides' text kept.
- test/folder-grid-ui.test.ts (#604) stubs rendersAsPage() like the other
panels-ui harnesses.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts resolved against #605 (and #602's test mock):
- CLAUDE.md Prompt uploads: #606's rewrite is kept and #605's bounded
workspace probe sentence follows the remote (SSH) refusal.
- test/routes/session-routes.test.ts: the remote-pane-history and
bounded-path-probe mocks are kept beside #606's _resetPasteRateBuckets
import, and both PRs' paste-image tests are kept.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict resolved in test/routes/session-routes.test.ts: #602's
remote-pane-history mock and #605's bounded-path-probe mock are both kept.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict resolved in docs/api-reference.md: #607's prompt cache section and
#528's tabGroupId section are both kept.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Docker refusal on POST /api/sessions/:id/folders tested only `~/`, but
listFolder also expands a bare `~` to this host's home, so a Docker case
could list and serve the host home through it (the preview's "Show folder"
for a `~/x.png` link reached it with no typing). A bare `~` now gets the same
400.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A remote session's local pane hosts the remote tmux client in the alternate
screen, so its history_size is always 0. #583 read that as "nothing to load"
and hid the partial-history notice, but with #602 a full=1 load reads the real
scrollback from the remote tmux. The route now leaves the field out for remote
sessions, so their notice keeps the byte-based wording and its Load full
history button.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict resolved in tmux-manager.ts: #609's screen-aware
joinScrollbackAndFrame keeps #602's merge-time SGR reset before the frame,
and #609's join tests expect it. The #601/#602 route test now mocks the
remote read in #609's { scrollback, screen } shape.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A remote session's local pane hosts the remote tmux client, so it is always
in the alternate screen. #601's alt=recording fallback therefore threw away
the scrollback #602 had just spliced in from the remote tmux on every remote
shell load. The fallback now applies only when no remote scrollback was
read (the read failed, or the session is not remote).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A full-history load of a remote SSH session reads the scrollback from the
remote tmux in one bounded ssh round trip and splices it above the local
frame. A transport failure (ssh 255, timeout, unparseable output) starts a
30 s per-host back-off; a missing remote session is per-session only.
Conflict resolved in session-routes.ts: #602's remote scrollback read runs
before #601's capture helper and its alternate-screen fallback.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts resolved against #583 and #588:
- One history-depth field: #583's `historyLines` / `capturedHistoryLines`
(reported as `paneHistoryLines`) is kept, and #601's lines cut now reads it
instead of a second `capturedHistorySize`. #601's `alternateOn` /
`capturedAlternateOn` joins it, and the one display-message format string
ends `#{history_size} #{alternate_on}`.
- selectSession keeps #588's full=1 switch for panes with no scrollback, gated
off remote and Docker sessions, and #601's SHELL_LOAD_QUERY for shells.
- computeHistoryTruncationNotice names a line count when paneHistoryLines is
known (#583) and otherwise uses #601's remainder wording.
- docs: api-reference lists both historyLinesCut and paneHistoryLines; the
notice invariant keys on history_size while the shell's automatic load is
the one place alternate_on decides.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Owner decision 2026-10-13 (#547): a rendered .html page behaves like a
file opened from disk in a browser. It may load scripts, styles, fonts,
images and media from any host and make fetch, XHR, WebSocket, beacon
and form requests to any host.
The /html-view Content-Security-Policy is therefore the `sandbox`
directive alone (HTML_VIEW_CSP, now exported and documented): the same
sandbox flags as before, never `allow-same-origin`, and no fetch
directive. It replaces Codeman's own `default-src 'self'` policy on these
responses. Everything that confines a page stays: the opaque origin (no
Codeman cookies or document, API writes with `Origin: null` refused, API
reads not readable cross-origin), and the capability serving only the
page's own folder under every path, symlink, dot, extension and
confinement rule.
A new test builds the route behind registerSecurityHeaders, as in
production, and pins the exact header: one `sandbox` directive with the
current flags, no `allow-same-origin`, no `-src` directive. The security
architecture, architecture invariants, API reference, CLAUDE.md and the
Working With Files wiki page now say what a page can do (reach the
network, read its own folder) and cannot do (Codeman's origin, cookies,
API, other folders), and that this is the owner's decision.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A rendered page's own <video> or <audio> could not seek, because the
route streamed a plain 200 without Accept-Ranges. sendFileBody() and
localFileSource() are now exported from file-routes.ts and the serving
route uses them, so it advertises Accept-Ranges and answers a Range with
206 + Content-Range (or 416), exactly like file-raw, the attachment raw
route and /api/download. The body sender hijacks the reply and copies
every header set before it (the sandbox CSP, CORS, no-store), which the
new test pins on a 206.
Media types stay in ASSET_TYPES: with Range support they work, and they
are served under the same sandbox CSP as everything else.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The mint checked the extension of the requested path, then built the page
URL from the symlink-resolved file name. A `report.html -> notes.txt` link
minted a page URL for the text file. The resolved name now has to be
.html or .htm as well, the mint-side counterpart of the serving route's
resolved-path extension check.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
POST /api/sessions/:id/html-view read `path` off an unchecked cast. It now
goes through HtmlViewOpenSchema in schemas.ts (a non-empty string of at
most 4096 characters without NUL or line breaks, no other keys) via
parseBody, like the other file routes, and keeps its "Missing path
parameter" message for an absent path.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The mint refused an HTML file whose absolute path had any dot segment, so
a workspace that itself lives under a hidden folder (~/.local/src/app)
could never render one of its own pages. For a file inside the workspace
the rule now covers the path below the workspace root, which is all the
page's tree can reach; outside the workspace it still covers the whole
path. A hidden directory below the workspace root is still refused.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The serving route checked the blocklist per request but not
attachmentConfineToWorkspace, while the attachment serve path
(file-routes.ts) re-checks it every time. A capability minted for a
folder outside the workspace before an admin turned confinement on kept
serving that folder for the rest of its TTL.
The capability record now says whether its folder was admitted from
outside the workspace, and the serving route refuses such a record while
confinement is on. The flag is part of the reuse key, so an
out-of-workspace mint never picks up a capability recorded as
in-workspace for the same folder.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The serving route checked hidden segments and the asset allowlist on the
requested name only; after realpath it checked containment and the
blocklist. A symlink `cfg.json -> .git/config` inside the page's folder
was therefore served as 200 application/json. The dot rule now also runs
on the segments of relative(rootDir, resolvedPath), and the extension
allowlist on the resolved file name, which also types the response.
Both realpath calls on the request path (the mint of an out-of-workspace
file and the serving route) are now `await fs.realpath` instead of
realpathSync, so a slow mount stalls one request, not the event loop.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
os.tmpdir() returns $TMPDIR when it is set, and macOS sets it in every
terminal session, so with TMPDIR set /tmp, /private/tmp and /var/tmp were
never treated as broad and /tmp/report.html got a capability over all of
/tmp. The broad-root list now names /tmp and /var/tmp literally (through
canonical(), so macOS gets /private/tmp), refuses any directory that is an
ancestor of a broad root (/home, /Users, /private), and treats a drive's
mount point (/mnt/d on WSL, /media/x, /Volumes/x) as broad as well.
The new test sets TMPDIR elsewhere and still gets /tmp refused.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Codeman maintainer