Consolidates the four contributor changesets, and rewords the em-dashes this release
added in comments and docs. The five in test/settings-save-failure-ui.test.ts stay:
they assert existing toast text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Owner decision. Typing the note into a brand-new non-Claude tab spent a model
turn per tab and, for a spawned worker or a scheduled run, landed with the first
real prompt. Claude keeps its hint through the system prompt, and every other CLI
is told nothing. The setting goes with the path it gated: sessionIdle, the fresh
set, isHintableSession and the session:idle wiring. sendInput loses `fromUser`,
which was only ever false for the hint, and the deps test pins that a reply is a
person's own input.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`cwd` beside the fixed `workingDir` reads ambiguously on a public API surface, and
`paneCwd` says where the value comes from, like `paneExit`. Also pin the field on
the payload the browser really receives (getSessionStateWithRespawn), and give the
pane-directory text its own architecture-invariants paragraph.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Bash( row holds a command, so its parentheses do not bound one spaced path:
`Bash(/tmp/a.out input.txt)` became a single link to a file that cannot exist and
lost master's `input.txt` link. The path tools keep linking a spaced name whole,
and a hard-wrapped Bash( row gets no spaced lookup either. Test rows from #734.
Co-Authored-By: DDT <141296842+Hugo-DDT@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The launch-id check is pure, so it now runs before the context warning and the
swap confirmation: nobody agrees to evict a model only to get the 400. Also the
search-box and in-use comments, the model-plain-colon wording, and the wiki's
order of the picker's marks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new install has no seen list, so every new OpenCode user was still warned about
an October incident that is long over. The mechanism stays for the next notice;
an empty list is now a valid file, and the validators keep running over whatever
it holds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
selectSession() toggles .active at once while _syncTabStripCorner() only runs in
the debounced render, so a cap set after measuring left a newly selected first
tab wider than the room and dropped the first row below the toolbar until then.
max-width changes nothing on a narrower tab, so the cap is simply always on, and
the clear-before-measure and finish-the-animation loops go. The no-usable-room
test uses 8 tabs: at 40 the scroll fallback fires first and it passed at any
threshold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both _abandonTunnelEnable() returns come after saveAppSettingsToStorage() wrote
the new values to this device but before _unsavedSettingsBaseline was set, so
after cancelling the no-password prompt the next Save sent no
showPlanUsageLimits flip and did not reload for a gesture-control change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review round on PR #757. The route turns EVERY upstream failure into
isLlamaSwap: false, so the old line silently promised an unreachable
endpoint was merely mute, and the live-session check missed a null pid
(the PTY exited, the same test keep-warm applies).
- Require pid !== null in _getCustomModelInUseBySession, pinned by a
'process exited' case in the marks-nothing table
- Reword #customModelPickUnknown to claim only that nothing was
reported, true for a down endpoint too; drop the 'stays quiet for a
failed probe' promise from changeset, docs and comments
- architecture-invariants: add the In-use tier, both pin fences
(customModel not displayModel; stopped/null-pid/paneExit never
count) and the unknown-line rule
- Mirror the wording through i18n (key + zh-CN), index.html fixture,
styles.css comment, and the run-menu tests
Round-four review, split fix 1: a stale 'last used' id kept the promotion truthy, so no row was tagged and the 'Nothing is marked' line stayed hidden. Derive it from promoted && models.includes(promoted).
Only llama-swap answers what is loaded, so behind a gateway such as Bifrost
nothing was marked and the picker fell back to discovery order apart from the
one CLI that had launched there before. A live session whose own injected
endpoint is that host now promotes its model as "In use by a session", under
its own tag and below llama-swap's "Currently loaded" answer, reading only
what Codeman injected rather than terminal text, and never a stopped session.
When genuinely nothing is known the picker says so instead of leaving an
unmarked wall, and stays quiet for an endpoint that merely failed to answer.
Round-four review item 4: focusing the search input on every picker open raises the OS keyboard over the list on phones; guard it the way readmymind-ui.js does.
- share one context-length resolution (discovered figure, endpoint default fallback) across the routes and boot recovery, with a recovery test
- record listed per-slot context figures with a slot count of 1 and force the slot-count fallback once per rediscovery
- open up the codex model launch token for qwen3-style ids (model-plain-colon), pinned by a spawn-golden case
- pass the full discovered window to opencode as limit.context
- translate the picker search strings and document the discovery precedence
- opencode: write limit.context/output from the discovered context length (#749)
- codex: override the native launch model when a custom endpoint is selected (#750), and set model_context_window
- model picker: add a search/filter box with a no-matches line
The wrapped header strip fell back to the plain wrap whenever its first
tab was wider than the room beside the toolbar. A selected tab is wider
(its gear and close show), so selecting the first tab flipped the whole
strip back: the toolbar took its own column again and, with long names,
every tab took a line of its own. Selecting any other tab brought the
full-width rows back.
The first tab is now trimmed to the room instead (tab-corner-fit, a
max-width from --tab-corner-first-max, its name ellipsized). Only a
toolbar that leaves less than TAB_CORNER_MIN_FIRST_TAB (120px) beside
it keeps the plain wrap, which does not depend on the selection.
Two measuring details make the trim hold:
- the room comes from the rounded-up float width, less the tab's 2px
margin and a pixel for subpixel layout (a tab at the exact width still
wrapped under the float);
- the first tab is measured with its trim cleared and its gear/close
width transitions finished, or a grown room reads the last trim as the
width and a selection change is judged by the width the tab is leaving.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
git's refusal quotes the destination, so a folder named openssl or rustls
classified as HOST_UNREACHABLE and the cleanup emptied it. The cleanup now
tests git's own text, DESTINATION_EXISTS is matched first, and ssl/tls are
matched as words. Also: a test for the Docker refusal on the default branch,
the route JSDoc and constant comment, and the folder copy (empty, or new).
The name rule now matches safePathSchema (letters, digits, space and _ - . ~,
no .., no leading dot, at most 255 bytes) so every folder it makes can be
linked. A file as the parent is a 400, errno text is no longer returned,
showHidden is forwarded like browse, and Create is disabled while the request
runs. Adds multi-user scoping tests.
The picker could only choose an existing folder. POST /api/filesystem/mkdir
creates one folder inside a folder the picker may browse (same roots,
ownership and blocked-tree rules as browse), and PathPicker gains an opt-in
allowNewFolder that adds a New folder button and selects the result.
The custom folder was treated as a parent, so the repository landed in <folder>/<case name>. The chosen folder is now the clone destination: an empty existing folder is cloned into directly (CloneOptions.intoEmptyDir, no temporary sibling, never removed on failure), a new folder is created, and a folder with files is refused.
Clone Repo could only clone under ~/codeman-cases. POST /api/cases/clone now takes an optional path (parent folder plus case name) and the Clone tab gets a Clone into a custom folder option with a Browse button, mirroring Create in a custom folder. The path is judged by prepareNewCasePath, the clone is registered as a linked case, the option is admin-only in multi-user mode, and an existing target folder is refused.
- a lone digit reply is typed without Enter while the tab has a pending permission or question
- the gateway starts after restoreMuxSessions (hold and release), so a reply during restore is not told the tab is gone
- discord-notify resolves an id prefix only among sessions the caller may see
- restore docs/architecture-invariants.md from base and add only the Discord section
- docs: self-ignoring folder, no logging, Notifications group, Send test, local-tab-only Claude hint, typedHint wording
- discord-notify: per-session token bucket (6 a minute), 429 RATE_LIMITED, plain line from codeman notify
- fileProblem probes the working folder with the bounded probe before realpath
- sendTest uses its own DiscordApi and leaves this.cfg alone
- drop the resumed-tab check from the typed hint (only Claude's field was read)
- first sessionRenamed per session records the name without a PATCH
- boot goes through ensureLoaded, so one gateway starts
- a thread created without an id reports the failure
Claude keeps the silent system-prompt hint (startupHint, on). Other CLIs are sent the typed message only with typedHint, which costs a model turn per tab.
Adds the codeman notify command, a startup hint (Claude via --append-system-prompt, other CLIs once on first idle), files saved from thread attachments into the tab folder, and --file uploads limited to the session folder.
Alerts for permission prompts, questions, idle and errors post into a per-tab thread; a reply from an allowlisted user is typed into that tab. Thread creation, thread cleanup on tab delete and pinging are configurable. POST /api/sessions/:id/discord-notify lets a CLI ask for the user. Setup is in docs/discord-bridge.md.
`all` also sped up Run's mode colours, Stop's confirming state and the armed Ctrl key. The browser test now reads the transition at rest, since its 250ms hold would also pass the old 0.2s one.
A relative path printed in the terminal was resolved against the session's
workingDir, which is fixed at create time and never follows a cd. In a shell
that moved into a subdirectory or a sibling repo, the link opened the wrong
file or reported "File not found".
The pane-exit watcher's batched list-panes read already carries
#{pane_current_path}. derivePaneCurrentPaths() turns those rows into one
directory per single-pane session, TmuxManager.getPaneCurrentPath() serves it
from memory, and the server applies it on the existing paneExitsUpdated tick
as SessionState.cwd, broadcasting only on a change. No new tmux call, no new
SSE event. A failed read keeps the previous answers.
Session.setCwd() uses the paneExit scoping rule: remote and Docker sessions
never get a cwd (their local pane runs the ssh or docker exec client), nor do
direct-PTY or rediscovered sessions. The value is runtime-only.
In the browser, relativeResolutionBase() picks the live cwd when known and
workingDir otherwise. It only changes the base a relative path joins: the
result is routed as before, so a target outside the workspace still goes
through the attachment routes, and file-content/file-raw are unchanged.
Codeman maintainer