The Docker refusal on POST /api/sessions/:id/folders tested only `~/`, but
listFolder also expands a bare `~` to this host's home, so a Docker case
could list and serve the host home through it (the preview's "Show folder"
for a `~/x.png` link reached it with no typing). A bare `~` now gets the same
400.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict resolved in terminal-tile.js's @dependency header: #601's
SHELL_LOAD_BASE_QUERY/SHELL_LOAD_QUERY and #527's pageKeysForGesture and
app.tabAlerts are all listed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A remote session's local pane hosts the remote tmux client in the alternate
screen, so its history_size is always 0. #583 read that as "nothing to load"
and hid the partial-history notice, but with #602 a full=1 load reads the real
scrollback from the remote tmux. The route now leaves the field out for remote
sessions, so their notice keeps the byte-based wording and its Load full
history button.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflict resolved in tmux-manager.ts: #609's screen-aware
joinScrollbackAndFrame keeps #602's merge-time SGR reset before the frame,
and #609's join tests expect it. The #601/#602 route test now mocks the
remote read in #609's { scrollback, screen } shape.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A remote session's local pane hosts the remote tmux client, so it is always
in the alternate screen. #601's alt=recording fallback therefore threw away
the scrollback #602 had just spliced in from the remote tmux on every remote
shell load. The fallback now applies only when no remote scrollback was
read (the read failed, or the session is not remote).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A full-history load of a remote SSH session reads the scrollback from the
remote tmux in one bounded ssh round trip and splices it above the local
frame. A transport failure (ssh 255, timeout, unparseable output) starts a
30 s per-host back-off; a missing remote session is per-session only.
Conflict resolved in session-routes.ts: #602's remote scrollback read runs
before #601's capture helper and its alternate-screen fallback.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The geometry-retry comment in selectSession and the #435 invariant said the
route never answers full=1 with mux-visible; a shell load's alt=recording on
an alternate-screen pane now is. The conclusion holds (a useFullHistory pass
never sends it), so only the stated reason changes. Also lists
SHELL_LOAD_BASE_QUERY in terminal-tile.js's @dependency header.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts resolved against #583 and #588:
- One history-depth field: #583's `historyLines` / `capturedHistoryLines`
(reported as `paneHistoryLines`) is kept, and #601's lines cut now reads it
instead of a second `capturedHistorySize`. #601's `alternateOn` /
`capturedAlternateOn` joins it, and the one display-message format string
ends `#{history_size} #{alternate_on}`.
- selectSession keeps #588's full=1 switch for panes with no scrollback, gated
off remote and Docker sessions, and #601's SHELL_LOAD_QUERY for shells.
- computeHistoryTruncationNotice names a line count when paneHistoryLines is
known (#583) and otherwise uses #601's remainder wording.
- docs: api-reference lists both historyLinesCut and paneHistoryLines; the
notice invariant keys on history_size while the shell's automatic load is
the one place alternate_on decides.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A remote (ssh) or Docker session's local pane hosts a nested tmux client in
the alternate screen, so it always reports paneHistoryLines 0 while its byte
tail carries the real scrolled-off output. The new full=1 switch therefore
replaced their scrollback with the visible frame on every revisit. Those
sessions now keep the tail; the pinned test string and the invariants note
say so.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
_smoothScrollBy and the touch paths call _maybeLoadMoreHistoryOnScroll on
every frame. Once the viewport sat at row 0, the next frame hit the real
pull's in-flight early return, so its reveal ran at once and the notice
showed the pre-pull tail state for the whole pull. A later frame now leaves
the reveal to the call that started the pull.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
ExcelJS's worksheet pattern is unanchored, so several parsed worksheets can
share one sheetNo and therefore one rels list. repairExcelJsModel filtered and
indexed that list once per worksheet, which let a crafted admitted file run
past the 20 s preview timeout. Each distinct list is now filtered and indexed
once per sheetNo, and the relationship Type strings are built once.
SPREADSHEET_ASSET_VERSION is refreshed for the edited core.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The XLSX preview hands an admitted copy of the workbook to ExcelJS 4.4.0,
which links each worksheet to its comments, comment notes (VML), tables and
drawing by looking the relationship Target up verbatim in maps keyed by its
own spelling, then dereferences the result unchecked. openpyxl, the library
most agents write .xlsx files with, uses absolute Targets
(/xl/tables/table1.xml), its own comment part name (xl/comments/comment1.xml,
which ExcelJS never loads) and a drawing XML ExcelJS parses to nothing. One
comment, table or chart was enough for "Spreadsheet preview failed".
repairExcelJsModel() (spreadsheet-xlsx-core.js) runs on ExcelJS's parsed
model right before its reconcile: it re-points a link to the key ExcelJS
stored for the same part (so an openpyxl table is kept) and drops a link,
tablePart, drawing or hyperlink reference that would dereference nothing.
It adds nothing and resolves keys as own properties only. The worker wraps
workbook.xlsx.reconcile per instance to call it, and throws if a future
ExcelJS renames that method. SPREADSHEET_ASSET_VERSION is refreshed.
Tests: unit tests on model objects, and three real openpyxl 3.1.5
workbooks in test/fixtures/xlsx that fail the worker tests without the hook.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The agent skill only reached Claude Code: injection wrote
.claude/skills/codeman, which no other CLI reads, and the per-session
preamble was seeded for claude alone. A Codex, Gemini, OpenCode,
Antigravity, Grok, DeepSeek or OMP session inside Codeman never learned it
could start and drive workers.
- Registry field capabilities.agentSkillDir (a closed enum, since
clis.json can set it and it decides where the server writes) names the
skills directory each CLI scans. Claude keeps .claude/skills; those seven
CLIs get the same skill in <case>/.agents/skills/codeman (each measured to
scan it; Claude Code does not, so it never sees two copies). pi gets none:
a project skill makes pi ask "Trust project folder?" at startup.
- The preamble is seeded for every local session whose CLI takes the
skill; nothing in it is claude-specific.
- The skill text is CLI-neutral and names the two CLI-side failures to
report instead of retrying: a sandbox that blocks loopback (Codex's
default), and commands that do not carry this session's environment
(Codex 0.162 runs them in a shared app-server daemon).
- POST /api/sessions injects after the launch pre-flight, so a CLI that
cannot start leaves nothing in the workspace.
- codeman skill install gains --mode; uninstall --case removes the copy
from every directory the registry can write.
- The settings toggle moves to Agents & CLIs > All agent CLIs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A Docker case is a local session for the file routes, but `~` inside the
container is the container's own seeded home. Expanding `~/x.png` on the host
opened a different file than the one the agent printed. The attachment POST
and POST …/folders now answer 400 for `~/` when the session has `docker` set
(absolute paths are unaffected: the workspace is a bind mount).
Docs: the resolved-target gate, the route-parameter limit, the listing join
rule and the Docker `~/` refusal in architecture-invariants.md,
security-architecture.md and CLAUDE.md.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
`git ls-files`, `find` and `ls -R` print one path per row. An extensionless
entry followed by an equal-or-shorter one looked like a path broken short of
the edge, so `src/components` + `src/index.ts` linked `src/componentssrc/index.ts`
and the real link was gone. Measured with the shipped terminalPathLine over this
repo: `git ls-files` 8 false joins (one over 6 rows), `find src docs scripts` 5.
A next row is now a new entry when it opens with `./` or `../`, or has a `/` and
opens on the same top directory the broken token did. A wrapped path continues
inside a name, so the captures/2 + 026-10-10/... case still joins. After the
change: 1 and 0 (`docker/server.Dockerfile` + `docs/SPEEDRUN.md`, a broken token
with no extension that no row-shape rule can tell from a wrap).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Folder routes only looked at the requested name, so `shot.png -> ../secret.bin`
and `notes.txt -> ../history` were served (registration answers 400 for both),
and a FIFO or device behind a supported name parked a worker on an open that
never returned. After resolving, the target's extension must be supported and
it must be a regular file (locally fs.stat, remotely the probe kind).
A 101..255-character file name answered 404 "Route not found": Fastify caps a
path parameter at 100 characters. The server now sets routerOptions.maxParamLength
(MAX_ROUTE_PARAM_LENGTH, shared with the route test harness) and a wiring guard
pins it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude Code's tracker nulls recache_tokens_if_cold at a compaction or a tool-result clearing and only counts the expected rebuild at the next request, which also closes the window, so no report carried both and the old rule never fired. Stamp on the first warm null report after one that carried a value, carry it through idle re-reports and drop it at the next request; the readout now says "Context compacted at HH:MM" since a clearing opens the same window.
Also persist a changed report so a crash restores the latest one, rename the session field to statusLineExporter (statusLineTelemetry is the registry capability) and document its values, word the stake as re-cached, move the readout block above the SSE staleness heading, and drop keep-warm mentions until it lands.
- Multi-user: a non-admin's folder must resolve inside their own userSpacePath
or the session's workingDir (folderAllowedForUser, the path picker's rule),
checked on the resolved folder before it is read and again on each served
file after symlink resolution; 403 otherwise.
- listFolder probes the local folder with probePathKind({ pastCap: true })
first (unknown -> 503 via describeUnknownPath, never 404), then async
fs.realpath; resolveFolderFile uses probePathKind instead of fs.stat.
- The guard runs on the realpath before readdir.
- FOLDER_PATH_LINK_PATTERN ends a folder at ':' (quadratic `://` rescan on
colon runs; PATH=/a:/b linked as one folder).
- Load counters drop stale preview / folder-grid responses; closing the grid
invalidates a listing still in flight.
- validFolderFileName refuses a leading dot; the remote listing matches
extensions in any case.
- Docs: folder grid in the z-index lists; multi-user rule and bounded probe in
the invariants and security docs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The remote history and the local frame are read a round trip apart, so
two seams dropped rows at the join: rows that scrolled off the screen
during the round trip, and the top of a remote screen taller than this
pane (a shared session sized by a taller client under window-size
latest). Both are rows of the remote screen above where the local frame
begins.
The remote script now also captures the screen, right after the
history, in the same round trip. joinScrollbackAndFrame() places the
local frame among the screen rows (findFrameInScreen(): text compare
with escape sequences and trailing blanks ignored, the screen's trailing
blank rows and last content row left out, at least three rows of
overlap with two of them non-blank, highest match wins) and keeps the
screen rows above it between the history and the frame. When the frame
cannot be placed, the join is history over frame as before. The read's
buffer slack grows to 1 MiB, since the screen is outside the tail -c
bound.
Left: the history and screen are two tmux commands, so a row that
scrolls between them (milliseconds) is lost, and a screen that repeats
a whole block can place the frame at the higher copy, losing the rows
between the copies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review follow-ups for loading a shell from tmux's rendered history.
tmux adds no history while a pane is in the alternate screen, and a
nested tmux client (remote SSH and Docker cases, or tmux run by hand)
holds its pane there, so a full capture of it is one screen. The
display-message query that reads #{history_size} now also reads
#{alternate_on} (PaneCaptureOptions.capturedAlternateOn), and a request
carrying `alt=recording` (only SHELL_LOAD_QUERY sends it) is answered
the old way on such a pane: the visible frame over the tailed byte
recording. Agents, scroll pulls and Load full history are unchanged.
alternate_on cannot tell a nested tmux from vim or less, so a local
shell with one of those open takes the same fallback while it is open.
A full capture without `lines=` was reported as a 'tail' cut whenever
the pane held more than the configured ceiling (possible on tmux before
3.7), offering a Load full history that could never return more. The
cut is now reported only for a client bound below the ceiling.
The response carries `historyLinesCut` when that bound left lines in
tmux, and the banner then says earlier output may be retained instead
of naming the bytes a later tail cut, which undercount what tmux holds.
A bounded grid tile's shell load sends its own `lines=` (via
SHELL_LOAD_BASE_QUERY). CLAUDE.md, docs/architecture-invariants.md and
docs/api-reference.md describe the shell load, the cut report and the
fallback.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
pageKeysForGesture kept `prepaid` set after the travel had fully repaid a
pre-paid page, so the one-second debt lifetime still applied: on a 38-row
pane, 19 lines of -1 at 32 ms left { pending: 0, prepaid: true } and a -1
300 ms later sent nothing. `prepaid` now clears as soon as the pending
travel reaches or crosses zero, so the leftover is plain travel and the
150 ms gap applies again. Touch contacts are unaffected (never split by
time). The mixed parity step's reversal grows from 20 to 25 rows because
the -5 rows left after repayment are now plain travel and cancel against it.
Review of #527 (Ark0N, 2026-10-11):
1. A slow touch drag paged a full screen per line. touchmove calls the
fallback once per whole cell, so a slow drag's calls were further apart
than the 150 ms gesture gap and each pre-paid a page (12 lines at 170 ms
sent 12 PageUps). The touch paths now tag every call, touchmove and
momentum frames alike, with a per-contact touchId (incremented on
touchstart), and pageKeysForGesture never splits a contact by time; a
new contact is a new gesture.
2. A pre-paid debt now survives up to PAGE_KEY_DEBT_MS (1 s) of quiet when
the next event goes the same way, so slow small wheel ticks (40 px every
250 ms, a Firefox 1-line notch) pay it back instead of each pre-paying.
A reversal inside the gap (or inside one contact) drops the debt and
accumulates without pre-paying, so a +/-3 px wobble no longer pages
back and forth. A reversal after the gap still pages at once. Main pane
and tiles share the helper, so both get it.
3. A wheel consumed by the dialog check now logs page-keys-dialog-open.
4. The Dashboard wiki names newer Codex beside OpenCode; the invariants
paragraph describes the new gesture boundaries.
Tests: unit regressions through the real _maybePageCliTranscript, helper
cases, tile/main parity for ticks and wobble, and a Chromium test that
drives the real initTerminal touch listeners (12 PageUps before, 1 after).
Conflicts resolved by keeping both sides:
- terminal-ui.js: master's wheelDeltaWholeLines/sgrWheelReports next to
this branch's pageKeyRows/pageKeysForGesture.
- terminal-tile.js: master's tile SGR wheel forwarding and Shift+wheel
local scroll (_shiftScrollPending) kept; tile paging stays on the
shared pageKeysForGesture state (_pageKeyGesture) with its per-tile
dialog check.
- architecture-invariants.md: this branch's hollow-paging paragraph,
with master's tile SGR forwarding and Shift+wheel sentences replacing
the old "do not forward SGR wheel" note.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Folder paths in the terminal and the response viewer are now links
(rooted or ~/ without an extension, relative with a trailing slash); a
click opens a grid of the folder's supported files, newest first, with
subfolder chips and a parent button. A tile opens the file preview,
which pages through the folder with ‹ › / ←/→; the preview of any file
gets a "Show folder" button.
Server: POST /api/sessions/:id/folders grants + lists a folder (local
fs or one ssh round trip for a remote case) under the attachment guard;
GET …/folders/:folderId/files/:name/(raw|preview|thumbnail) serves one
file by bare name through resolveServableAttachmentPath, so browser
requests still never carry a path. Grants live in their own small
registry so a big folder cannot evict the session's attachments. The
attachment raw route's body is now the shared serveServableRaw helper.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Terminal and response-viewer links only knew rooted absolute paths. Agent
output is full of the other forms: Claude Code echoes an attached image as
`~/repos/x/garage.png`, scripts print `builds/captures/x.png`, and Claude
Code wraps tool output a few columns short of the edge, so a long path
arrives as `.../captures/2` + `026-10-10/x.png` and only its prefix linked.
- constants.js: RELATIVE_FILE_PATH_LINK_PATTERN + findFilePathLinks() (one
entry point for both consumers; never inside an http(s) URL),
resolveLinkedFilePath() (relative -> session workingDir, ~/ as is),
terminalPathLine() (glues a path a program broke over lines; guarded so
ordinary short lines are never joined).
- terminal-ui.js: provider uses them, no overlapping links, opens the
resolved path. Touch selection keeps terminalLogicalLine.
- app.js: response viewer links the same forms; only its own links are
resolved, a markdown document's rebased links stay as they were.
- Server: registerExternalAttachment accepts ~/ (local homedir(); remote
probe expands $HOME on the host). Guards run on the resolved path.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A shell's automatic loads (tab select, dropped-output recovery, clear
terminal, a split/grid tile's load) replayed `session.terminalBuffer`,
the raw PTY recording, ahead of the visible frame. That recording holds
full-screen repaints (an ssh'd tmux, less, any TUI: cursor home, then the
rows joined by newlines, prompt on the last row) drawn for the pane
height of the moment. Replayed into a terminal with fewer rows, each
repaint's last newline scrolls and pushes its top row into scrollback,
so one line tmux holds once shows up dozens of times (26 copies in the
case that found this, after the pane went from 24 to 23 rows). Remote
SSH shell sessions hit it constantly: their inner tmux repaints often.
Shells now load a bounded window of tmux's rendered history instead
(`SHELL_LOAD_QUERY`: full=1&tail=1MiB&lines=10000), the same source the
scroll-to-top pull already used. `lines=10000` bounds the synchronous
capture-pane, measured at ~8 ms per 1000 lines (~0.1 s here vs ~0.8 s
for a 100k-line history). Because that bound is shallower than xterm's
scrollback, the server now reports a cut: the capture's existing
display-message query also reads `#{history_size}`
(`PaneCaptureOptions.capturedHistorySize`), and the route marks a full
capture `truncated` / 'tail' when tmux holds more than it read, so the
banner keeps offering Load full history and scroll-to-top keeps pulling
older lines. The byte cap still reports 'capped'. The banner no longer
names an amount it cannot know ("less than 1 KB more") for such a cut.
Agent sessions are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A remote SSH session's local pane runs `ssh -t … tmux new-session -A` (or
`attach`), so the local tmux only sees the remote tmux client's full-screen
repaints and keeps a fraction of the history: measured 48 of 279 lines while
output streamed, none after a reattach. The remote pane, where the shell
runs, keeps all of it.
A full-history load (`GET /api/sessions/:id/terminal?full=1`) of a remote
session now reads the scrollback rows from the remote pane in one ssh round
trip (`#{history_size}` + `capture-pane -S -<N> -E -1`, exact `=name:`
target, newest bytes kept by a remote `tail -c`), and the local capture
reads only its visible frame (`-S 0`), spliced below them
(`PaneCaptureOptions.scrollbackOverride`). The local frame and caret are
kept because the live stream keeps drawing into the local pane.
Fail-soft and bounded: connection options from buildSshConnectionArgs(),
the shared remote-ssh limiter (a slot waited for longer than 1.5 s is given
up), a 5 s timeout, and a 30 s per-host back-off after any failure, which
keeps the local capture as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude Code's statusline has carried a prompt_cache object since v2.1.251, and Codeman's statusline exporter already received it, but StatusTelemetrySchema stripped the whole object, so Codeman never knew whether a session's conversation was still cached. Keep it and show it.
StatusTelemetrySchema now lists every documented scalar field null-tolerant (several are documented as possibly null, and the object gains fields across CLI versions, so a strict shape would 400 the post and blank the footer), while parsePromptCache normalizes only the subset Codeman stores, so a hostile localhost payload cannot bloat state. Session.promptCache rides toState with a change-only session:promptCache event, and the route broadcasts the stored object.
The Session Options (Respawn tab) readout shows warm-until or cold with the re-read stake, the cache hit rate, the last miss's causes, and, for Claude Code's own idle compaction (recache_tokens_if_cold null while expected_rebuilds rose), a "compacted at HH:MM" note that is never raised as an alert. setPromptCache stamps that on a new object rather than mutating the parsed report, so the stamp reaches the broadcast. Sessions without a statusline of their own also get a cache:until HH:MM / cache:cold group in the terminal footer. The last report is restored on a Codeman restart (like displayModel) so the readout is not blank until the pane's next render; the readout is time-aware, so a value whose expiry has passed reads as cold, not stale-warm. A launch without the exporter records why (collection off, workspace statusline, remote) so the row says the cause instead of "not reported yet" forever.
This is the sensor a later opt-in keep-warm would read, and the TTL it reports is the source of truth rather than the plan tier.
The wiki, decision 11 in the tile-grid plan, its Persistence section, the
layout-memory test header and two tile-grid.js comments said the Tiles
button and a page reload bring the grid back however it was closed. Only
the Tiles button does: a grid closed before the reload stays stored as
open: false, the page shows the single view, and the toggle puts the grid
back. The behaviour was right; the wording now says that.
A test pins it through the real close path: arrange the grid, close it with
the toggle, start a fresh page, and the restore leaves the single view
while the toggle still brings back the cells, count, divider sizes, focus
and zoom. ('a stored closed grid leaves the single view' in
tile-grid-restore.test.ts covers the same from a raw stored value through
handleInit.)
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A session popped out while the grid was open (its pop-out button, or
another dashboard tab announcing the pop-out over the window channel) left
the grid through _markDetached, which removed its tile as if the user had
closed it: the stored count dropped to five and its cell stayed a hole the
ranking never filled, so after the window re-docked Tiles off and on showed
five tiles and an empty cell. Popping out with the grid closed, or a reload
reconcile, already kept the count and refilled the cell.
_markDetached now removes the tile as `gone` (it left by itself), the same
as a deleted session or a refused socket, so the count stays and the next
activation fills the cell from the ranking.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
After a session's first load per page, a tab switch fetched a 1 MiB tail of
the server's byte stream. For a fullscreen claude pane (alternate screen,
tmux `history_size` 0) that tail is old repaints of one frame, and an idle
tab parsed it twice (the cached copy, then the fresh one).
Every terminal response now records `paneHistoryLines` per session, and
`selectSession` takes `full=1` whenever the last report was 0. For such a
pane that capture is the visible frame, a few KB, which is also what a page
load already shows. A response without the field forgets the entry, so
unknown never counts as empty; a pane that starts keeping history goes back
to the tail on the next switch. Shells and the refresh path are unchanged.
Measured with real prod payloads through the real client in chromium:
median switch 1.26-1.66 s -> 0.10-0.19 s, parse ~1.1-1.5 s -> 2-3 ms.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Tiles toggle used to fill a remembered grid to the count picked in the
menu (refilling a hole the user made, or trimming tiles), removing the last
tile or "Open group as tiles" forgot it, and Ctrl/Cmd+click repacked it.
The owner asked for the opposite: "when I turn tiles off and on, always
keep what the last setting was".
Now the layout the user arranged (which session sits in which cell, holes
included, the tile count, the divider sizes, the focused tile and a zoom
they chose) is written to localStorage on every change and comes back
exactly from the toggle, Ctrl+Shift+G and a reload, however the grid was
closed (toggle, a non-tiled tab, leaveTiles or a #session= link, Home, the
width gate, the last tile, a group, closing or killing sessions). Nothing
of it reaches the server.
- The stored value stays v: 1 and gains `count`: how many tiles the user's
own last change left. A session that goes away by itself (deleted,
popped out, socket refused) does not lower it, so the next activation
fills that cell from the ranking; a hole the user made stays a hole.
- sanitizeTileGridState reports `freed` cells (sessions gone since) and
derives `count` for values written before it; restoreTileGridCells (pure)
puts a stored grid back, freed cells first, never trimmed to the window
(a too-small window shows the focused tile until it fits).
- Only when none of the stored sessions survive does activation rank from
scratch. A count picked in the menu still re-forms the grid to it.
- Nothing is persisted while a stored grid is being put back, and a
#session= link only flips `open`, keeping gone ids for the fill.
- The hover card no longer promises "a click opens N" when a stored grid
will open instead.
This supersedes decision 10's answer that the count wins over a
remembered grid's size; the affected tests say so.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The "Showing the most recent 1.0 MB of this session. 4.8 MB more may still
be retained." bar covered the top of the terminal on nearly every tab switch,
and for fullscreen claude panes it could never be acted on: `truncated`
measures the server's byte stream, while Load full history asks tmux, which
holds no scrollback for a pane that lives in the alternate screen.
- The capture reads `#{history_size}` in the cursor query it already makes
and the terminal route returns it as `paneHistoryLines`.
- A reported 0 hides the notice; a positive count replaces the byte gap in
the message.
- The notice is lazy: it appears once a wheel/touch gesture reaches the top
of the browser buffer (after the pull that gesture starts), leaves when
the user scrolls back to live output or switches tabs, and its dismissal
sticks per session until reload.
- formatHistoryBytes no longer prints "1024 KB" just under 1 MiB.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Tiles button with no stored grid opened the first tabs, so the oldest
sessions got tiles while the busy ones were left out. It now ranks the
open sessions: working first (the most recently started turn first, keyed
off lastSubmitAt only, since a working pane's activity stamp is always
"now"), then the ones needing input (the red and yellow tab alerts), then
everything else by most recent activity, tab order breaking ties.
The ranking is pure (rankTileSessions in constants.js) and reuses the home
screens' classification (_mobileOverviewState) and stamps. It feeds the
toggle's fresh set, a count picked in the menu, Ctrl/Cmd+click and an open
split's fill. The active session is still always included and focused,
detached sessions are never tiled, and a page without the classifier falls
back to tab order. The vm harness now loads mobile-overview.js so the app
tests exercise the real classifier.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
183efacc turned drag off while the rail search narrows the list, as the
owner asked, by refusing the flat manual rail's dragstart. That also
refused a drag that never reorders anything: with the tile grid open, a
found tab dragged onto a tile or an empty cell set no draggedTabId, so
_acceptTabDrops() (tile-grid.js) saw nothing and the drop was lost. On
the PR head that drop replaced or swapped the tile. The owner's reason
covers the reorder only: a reorder drop is saved for every device,
relative to rows the search hides, while the tile grid is per-device and
lands beside nothing hidden.
dragstart is unconditional again. The rows refuse the reorder instead:
their dragover returns before preventDefault while _tabRailSearchActive()
(the browser shows no-drop and fires no drop there), and their drop
returns before touching sessionOrder, for anything above the row that
might let a drop through. `draggable` stays on, so a cleared search
reorders with the same rows. The grouped rail's pointer drag keeps its
refusal in _onTabLayoutPointerDown(): it has no drop target besides the
rail.
Test: during a search that leaves both rows showing, dragstart is not
cancelled and sets draggedTabId, dragover on another row is not
accepted, a drop there leaves sessionOrder alone and saves nothing, the
real _acceptTabDrops() binder accepts the drag on a tile and hands it
the id, and after clearing the same rows reorder. It fails on the
previous commit, without the dragover guard, and without the drop guard.
CLAUDE.md, the invariants, the Dashboard wiki row and the release
changeset now say reordering by drag is off and a tile drop still works.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A floating subagent or ultracode window whose parent session's row the
rail search hid drew its connector from the viewport's top-left corner.
The hidden row is display:none, and getBoundingClientRect() still
answers it with an all-zero DOMRect, which is truthy, so the
`if (!tabRect) continue` paths never skipped it and _tabAnchor() put the
line at (0, 0) ("M 0 0 C 350 0, 350 400, 700 400" in Chromium). The
sidebar filter already had the same defect; #580 brought it to the rail,
and the keystroke redraw from 5f373a93 now ran it on every keystroke that
hides the parent.
A new _paintedSessionTab() in app.js returns the parent's row only while
getClientRects() is non-empty, and every place a floating window
measures its parent tab goes through it:
- the shared `tab:<id>` rect cache, filled by the subagent connectors
and by both ultracode connector layers (all three fill it, so guarding
only the first would let the next one cache the zero rect itself);
- the ultracode window's spawn position, which now cascades;
- the subagent window's fly-from-tab spawn, the same defect, not in the
report, now positioned as a window without a tab;
- the ultracode genie on minimize, which now tears down at once.
Lineage lines need nothing: they measure on a cache miss and computeTree
already drops zero-size rects.
Tests: in the gate, with the page laid out by hand (jsdom has no
layout), a subagent window, an ultracode run window and an ultracode
agent window from a hidden row draw no line and draw it again from the
row once the search is cleared, an ultracode window spawns from a
painted row and cascades from a hidden one, and the genie is skipped for
a hidden row. In the browser suite, real Chromium shows the hidden row's
rect is all zero and the connector is gone, then back after Clear. All
four fail on the previous commit. CLAUDE.md and the invariants'
Connectors bullet record the rule.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Closing a tab took ~0.55-0.7s on an idle machine, more with child
processes or recently active subagents. Most of it was waiting:
- The web UI kept the tab until DELETE returned, then removed it on the
100ms tab-render debounce, which every session update restarts.
closeSession() is now optimistic: the tab, tile and split go and the
next session is selected before the request is sent, rendered at
once. A refused delete (checked with a GET, since a delete can land
and lose its reply) puts the row back at its old index with the
error toast. This also fixes a latent bug: _apiDelete never throws,
so an HTTP error used to report "Session closed" while the session
kept running. SSE upserts skip ids that are being closed.
- The kill path slept fixed intervals (100ms PTY grace, 200ms for the
pane's children, 100ms for the process group) and verified in 100ms
steps. waitForProcessesExit() (utils/process-exit-wait.ts) keeps
every deadline but returns once the processes are gone, counting a
zombie as exited. Signal decisions keep kill(pid, 0).
- tmux kill-session and the pane-pid lookup ran via execSync, freezing
the server for ~70ms per close. Now async.
- killSubagentsForSession() ran a full `pgrep -f claude` scan per
active/idle subagent (~85ms each with ~100 matching processes). It
now scans once for all of them.
Measured on an isolated instance: click to tab gone 540-690ms -> 58-95ms;
DELETE of a claude session ~450ms -> ~200-260ms.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
From the owner's review of #580 rather than the bot's report: "Drag
while searching: I'd turn it off. A drop is saved for every device
(session order or the tab layout), and where it lands relative to the
rows the search is hiding is something you only see after clearing it."
The PR head left drag on.
Both rail drags now refuse while the search narrows the list: the
grouped rail's pointer drag in _onTabLayoutPointerDown(), and the flat
manual rail's HTML5 drag in its dragstart listener. The flat rail is
refused in the listener, not by flipping `draggable`, because a
keystroke in the box does not re-render the rows, so a cleared search
drags again with the same rows. The sidebar filter box, the header strip
and the keyboard moves (Ctrl+Shift+{ }, the row menu) are unchanged.
Tests: a grouped-rail press during a search starts no drag and one after
clearing does; a flat-rail dragstart during a search is refused and one
after clearing goes through. CLAUDE.md and the Dashboard wiki row say
so.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
CodemanTabSearch lower-cased the query and each row with
toLocaleLowerCase(), i.e. the browser's locale. Under a Turkish or Azeri
locale "API Review" lowers to "apı review", so a search for "api" missed
it, and the sidebar filter box, which used locale-independent
toLowerCase() before #580, changed matching with it. Both now use
toLowerCase(), like every other frontend search.
Test: a vm context of its own whose toLocaleLowerCase behaves like the
Turkish locale (the prototype is that context's alone) checks that "API"
still normalizes to "api" and that "API Review" matches. The test file's
overview also lists the pins the #580 fixes added.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Since the sidebar filter and the rail search share _applyTabListFilter(),
the sidebar's filter box also marks a .tab-cluster it emptied in the
by-case tab layout and rewrites its count. But the only rule hiding
.tab-cluster.tab-filtered-out was the rail-scoped one, so in the sidebar
the emptied box stayed painted with its label and a count of 0 while its
rows were hidden.
The sidebar rule now hides the marked case box as well. It stays scoped
to html[data-session-list="sidebar"], so a leaked class still cannot hide
anything on the header strip. An alerted row still counts toward its box
(the owner's call on #580), so a box holding a row that needs the user
never hides.
Tests: a unit test renders the sidebar in the by-case layout and checks
the emptied box is marked with a 0 count, that an alerted row keeps its
box on screen and counted, and that clearing restores the totals; a
stylesheet check pins the scoped selector; the browser test measures the
shipped styles.css in Chromium: the marked box is not painted in the
sidebar layout, an unmarked one is, and the header layout hides nothing.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A keystroke in the rail search box that does not change the group
structure only toggles classes, so hidden rows collapsed and the rows
below them moved up while the lineage lines and the subagent/ultracode
connectors kept pointing at the old positions until the next render. The
sidebar filter box had the same gap for its connectors.
_applyTabListFilter() now notes whether anything it touched actually
appeared or disappeared (a row, a group or case box, the state headings
via tabs-filtering, the "No sessions match" line) and calls
updateConnectionLines() only then. That covers both boxes and the alert
re-render, costs nothing on the re-apply every render tail runs when
nothing changed (the incremental path's lineage gate keeps its meaning),
and coalesces with a render's own redraw.
Same flag, owner's optional nit from the review: the grouped tree's
posinset/roving-stop fix-up at the filter tail now runs only while a
search hides something or right after one changed what shows, since both
render paths already set them over an unfiltered tree.
Tests: unit tests for the rail keystroke path (flat and grouped rail, no
render taken), the empty note, the sidebar box, and no redraw when
nothing moved; the browser test checks in Chromium that a class-only
keystroke moves a row up and redraws exactly once.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Codeman maintainer