feat(codex): read approval, question and trust dialogs off the screen

Codex is the one CLI Codeman launches with its approvals on by default, and
it declares `hooks: 'none'`, so nothing tells Codeman it stopped to ask. A
codex session parked on "Would you like to run the following command?" read
as plainly idle, and one parked on a question read as WORKING, because the
question's own key hints end in `esc to interrupt`, codex's working line.

This adds a generic, optional registry field,
`capabilities.workDetect.blockedLine` (plus `blockedLines`, the window), and
the session state that reads it:

- `isBlockedScreen()` (session-activity.ts, pure) joins the last
  `blockedLines` non-blank rows of a capture and tests the pattern once, so a
  pattern can demand several markers and anchor the dialog's footer on the
  end of the window.
- `Session` reads it off the same capture the idle confirmation already
  takes, emits `blockedChanged`, and exposes `screenBlocked`. It raises on
  one reading, and while a dialog is up re-reads the screen every 2 s,
  because answering resumes the turn and a busy pane would not reach the
  settle path again until the turn ended. It clears only after two readable
  captures in a row without the dialog, so a capture taken mid-repaint cannot
  clear and re-raise it; an unreadable capture changes nothing. A blocked
  screen wins over the working line in the same capture.
- The pattern goes through `compileVersionRegex()` in both the schema refine
  and at use (lazily cached), like every other config regex.

Codex's pattern was measured on a live codex-cli 0.162.0 pane on 2026-10-14
(`-a on-request -s read-only`, widths 200 down to 36): it needs a `› N.`
option row and then the dialog's key-hint row as the last row, allowing for
that row to wrap below about 60 columns. Command, edit and network-escalation
approvals, single and multi-question dialogs and the startup trust prompt
match; the idle and working views, menus the user opened (`/model`,
`/permissions`, `/review`), the composer holding the dialogs' words and a
transcript quoting them verbatim do not. `Implement this plan?` is left out
on purpose: its footer is the same as `/model`'s and the turn has ended
there. The captures are kept as fixtures (trailing whitespace trimmed, the
scratch path replaced).

Nothing consumes `blockedChanged` yet; the next commit raises the alert.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

test/fixtures/codex-dialogs/after-approve.txt

@@ -0,0 +1,50 @@
+╭─────────────────────────────────────────────────╮
+│ ✨ Update available! 0.162.0 -> 0.162.1         │
+│ Run npm install -g @openai/codex to update.     │
+│                                                 │
+│ See full release notes:                         │
+│ https://github.com/openai/codex/releases/latest │
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+
+› Run the shell command: touch created.txt (it needs write access, ask me for approval to run it outside the sandbox)
+
+
+• touch created.txt needs write access in the workspace. I’ll request approval to run that exact command outside the read only sandbox.
+
+✔ You approved codex to run touch created.txt this time
+
+• Ran touch created.txt
+  └ (no output)
+
+• Created created.txt successfully.
+
+  Worked for 17s • 4:23 AM
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+› Ask Codex to do anything
+
+  GPT-6-Luna default · /tmp/codex-scratch/repo · Request approval to create file
+  ? for shortcuts

test/fixtures/codex-dialogs/after-deny.txt

@@ -0,0 +1,50 @@
+│ See full release notes:                         │
+│ https://github.com/openai/codex/releases/latest │
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+
+› Run the shell command: touch created.txt (it needs write access, ask me for approval to run it outside the sandbox)
+
+
+• touch created.txt needs write access in the workspace. I’ll request approval to run that exact command outside the read only sandbox.
+
+✔ You approved codex to run touch created.txt this time
+
+• Ran touch created.txt
+  └ (no output)
+
+• Created created.txt successfully.
+
+  Worked for 17s • 4:23 AM
+
+
+› Edit calc.py to add a function sub(a, b) that returns a - b. Use your file editing tool, not a shell command.
+
+
+• I’ll inspect calc.py, then use the file editing tool to add the function.
+
+• Explored
+  └ Read calc.py
+    + Show details
+
+• Edited calc.py (+4 -0)
+    3 +
+    4 +
+    5 +def sub(a, b):
+    + Show details
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+✘ Failed to apply patch
+  └ (error details unavailable)
+    + Show details
+
+
+› Ask Codex to do anything
+
+  GPT-6-Luna default · /tmp/codex-scratch/repo · Request approval to create file
+  ? for shortcuts

test/fixtures/codex-dialogs/after-question.txt

@@ -0,0 +1,50 @@
+
+
+› Use curl to fetch https://example.com and tell me the HTTP status code.
+
+
+• I’ll use curl to fetch the URL and report the response status.
+
+• Failed (exit 6) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ curl: (6) Could not resolve host: example.com
+    000
+
+• curl couldn’t resolve example.com in the sandbox, so it returned status 000. I need network access to fetch it.
+
+  Worked for 3s • 4:24 AM
+
+
+› Request approval to rerun that curl with network access (escalated permissions).
+
+
+• I’ll request approval to rerun the same curl command with network access.
+
+✗ You canceled the request to run curl -sS -o /dev/null -w '%{http_code}' https://example.com
+
+• Failed (exit 1) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ (no output)
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want to add a greeting file. Before planning, ask me which language the greeting should be in, using your question tool with a few options.
+
+
+• Questions 1/1 answered
+  • Which language should the greeting file use?
+    answer: English (Recommended)
+
+• Explored
+  └ List rg --files -g AGENTS.md -g '*greet*' -g 'README*' -g Makefile -g pyproject.toml -g package.json -g calc.py
+    + Show details
+
+• Working (5s • esc to interrupt)
+  └ Tip: Use /feedback to send logs to the maintainers when something looks off.
+
+
+› Ask Codex to do anything
+
+  GPT-6-Luna medium · /tmp/codex-scratch/repo · Request approval to create file                       Plan mode
+  ? for shortcuts

test/fixtures/codex-dialogs/composer-typed-dialog-text-w60.txt

@@ -0,0 +1,23 @@
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want a file named animal.txt. Use your question tool to
+  ask me which animal to write in it, with 3 options. Ask
+  only that one question.
+
+
+■ Conversation interrupted - use /feedback if something went
+wrong
+
+
+› › 1. Yes, proceed (y)   Press enter to confirm or esc to
+  cancel   tab to add notes | enter to submit answer | esc
+  to interrupt
+
+  GPT-6-Luna medium · /tmp/codex-scratch/repo Plan mode

test/fixtures/codex-dialogs/composer-typed-dialog-text.txt

@@ -0,0 +1,49 @@
+╭─────────────────────────────────────────────────╮
+│ ✨ Update available! 0.162.0 -> 0.162.1         │
+│ Run npm install -g @openai/codex to update.     │
+│                                                 │
+│ See full release notes:                         │
+│ https://github.com/openai/codex/releases/latest │
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want a file named animal.txt. Use your question tool to ask me which animal to write in it, with 3 options. Ask only that one question.
+
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+› › 1. Yes, proceed (y)   Press enter to confirm or esc to cancel   tab to add notes | enter to submit answer | esc to interrupt
+
+  GPT-6-Luna medium · /tmp/codex-scratch/repo · Ask for animal choice            Plan mode (shift+tab to cycle)

test/fixtures/codex-dialogs/composer-typed.txt

@@ -0,0 +1,49 @@
+╭─────────────────────────────────────────────────╮
+│ ✨ Update available! 0.162.0 -> 0.162.1         │
+│ Run npm install -g @openai/codex to update.     │
+│                                                 │
+│ See full release notes:                         │
+│ https://github.com/openai/codex/releases/latest │
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+› Run the shell command: touch created.txt (it needs write access, ask me for approval to run it outside the sandbox)
+
+  GPT-6-Luna default · /tmp/codex-scratch/repo

test/fixtures/codex-dialogs/edit-approval.txt

@@ -0,0 +1,50 @@
+│ https://github.com/openai/codex/releases/latest │
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+
+› Run the shell command: touch created.txt (it needs write access, ask me for approval to run it outside the sandbox)
+
+
+• touch created.txt needs write access in the workspace. I’ll request approval to run that exact command outside the read only sandbox.
+
+✔ You approved codex to run touch created.txt this time
+
+• Ran touch created.txt
+  └ (no output)
+
+• Created created.txt successfully.
+
+  Worked for 17s • 4:23 AM
+
+
+› Edit calc.py to add a function sub(a, b) that returns a - b. Use your file editing tool, not a shell command.
+
+
+• I’ll inspect calc.py, then use the file editing tool to add the function.
+
+• Explored
+  └ Read calc.py
+    + Show details
+
+• Edited calc.py (+4 -0)
+    3 +
+    4 +
+    5 +def sub(a, b):
+    + Show details
+
+
+  Would you like to make the following edits?
+
+  Description: Apply proposed file edits
+  Destination: /tmp/codex-scratch/repo/calc.py
+
+
+› 1. Yes, proceed (y)
+  2. Yes, and don't ask again for these files (a)
+  3. No, and tell Codex what to do differently (esc)
+
+  Press enter to confirm or esc to cancel

test/fixtures/codex-dialogs/exec-approval-60x14.txt

@@ -0,0 +1,14 @@
+
+  Would you like to run the following command?
+
+  Environment: local
+
+  Reason: May I run the requested quoted heredoc with
+  write access to create lines.txt?
+
+  $ cat > lines.txt <<'EOF'
+  line 1
+  [… 21 lines] ^a view all
+› 1. Yes, proceed (y)
+  2. No, and tell Codex what to do differently (esc)
+  Press enter to confirm or esc to cancel

test/fixtures/codex-dialogs/exec-approval-long-command.txt

@@ -0,0 +1,50 @@
+
+› Reply with exactly these five lines as plain text, nothing else, no tools: 'Would you like to run the following command?' then '› 1. Yes, proceed (y)' then '  2. No, and tell Codex what to do
+  differently (esc)' then 'tab to add notes | enter to submit answer | esc to interrupt' then '  Press enter to confirm or esc to cancel'
+
+
+• Would you like to run the following command?
+  › 1. Yes, proceed (y)
+  2. No, and tell Codex what to do differently (esc)
+  tab to add notes | enter to submit answer | esc to interrupt
+  Press enter to confirm or esc to cancel
+
+  Worked for 1s • 4:31 AM
+
+
+› Run this exact multi-line shell command with escalated permissions (ask me for approval): a bash heredoc that writes 12 lines 'line 1' through 'line 12' into lines.txt, using cat > lines.txt with a
+  quoted heredoc, each line written out literally.
+
+
+• I’ll request approval to run the quoted heredoc that writes the 12 literal lines to lines.txt.
+
+• Running cat > lines.txt <<'EOF' …
+    + Show details
+
+
+  Would you like to run the following command?
+
+  Environment: local
+
+  Reason: May I run the requested quoted heredoc with write access to create lines.txt?
+
+  $ cat > lines.txt <<'EOF'
+  line 1
+  line 2
+  line 3
+  line 4
+  line 5
+  line 6
+  line 7
+  line 8
+  line 9
+  line 10
+  line 11
+  line 12
+  EOF
+
+
+› 1. Yes, proceed (y)
+  2. No, and tell Codex what to do differently (esc)
+
+  Press enter to confirm or esc to cancel

test/fixtures/codex-dialogs/exec-approval-w36.txt

@@ -0,0 +1,30 @@
+› Run: touch second.txt (needs app…
+  access outside the read only
+  sandbox. I’ll request approval to
+  run that exact command.
+
+• Running touch second.txt
+
+
+  Would you like to run the
+  following command?
+
+  Environment: local
+
+  Reason: May I run `touch
+  second.txt` outside the read
+  only sandbox to create the
+  requested file?
+
+  $ touch second.txt
+
+
+› 1. Yes, proceed (y)
+  2. Yes, and don't ask again for
+     commands that start with `touch
+     second.txt` (p)
+  3. No, and tell Codex what to do
+     differently (esc)
+
+  Press enter to confirm or esc to
+  cancel

test/fixtures/codex-dialogs/exec-approval-w44.txt

@@ -0,0 +1,30 @@
+  outside the sandbox)
+
+
+• Creating second.txt requires write access
+  outside the read only sandbox. I’ll
+  request approval to run that exact
+  command.
+
+• Running touch second.txt
+
+
+  Would you like to run the following
+  command?
+
+  Environment: local
+
+  Reason: May I run `touch second.txt`
+  outside the read only sandbox to create
+  the requested file?
+
+  $ touch second.txt
+
+
+› 1. Yes, proceed (y)
+  2. Yes, and don't ask again for commands
+     that start with `touch second.txt` (p)
+  3. No, and tell Codex what to do
+     differently (esc)
+
+  Press enter to confirm or esc to cancel

test/fixtures/codex-dialogs/exec-approval.txt

@@ -0,0 +1,50 @@
+╭─────────────────────────────────────────────────╮
+│ ✨ Update available! 0.162.0 -> 0.162.1         │
+│ Run npm install -g @openai/codex to update.     │
+│                                                 │
+│ See full release notes:                         │
+│ https://github.com/openai/codex/releases/latest │
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+
+› Run the shell command: touch created.txt (it needs write access, ask me for approval to run it outside the sandbox)
+
+
+• touch created.txt needs write access in the workspace. I’ll request approval to run that exact command outside the read only sandbox.
+
+• Running touch created.txt
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  Would you like to run the following command?
+
+  Environment: local
+
+  Reason: May I run `touch created.txt` outside the read only sandbox to create the requested file?
+
+  $ touch created.txt
+
+
+› 1. Yes, proceed (y)
+  2. Yes, and don't ask again for commands that start with `touch created.txt` (p)
+  3. No, and tell Codex what to do differently (esc)
+
+  Press enter to confirm or esc to cancel

test/fixtures/codex-dialogs/idle-start.txt

@@ -0,0 +1,50 @@
+╭─────────────────────────────────────────────────╮
+│ ✨ Update available! 0.162.0 -> 0.162.1         │
+│ Run npm install -g @openai/codex to update.     │
+│                                                 │
+│ See full release notes:                         │
+│ https://github.com/openai/codex/releases/latest │
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+
+
+
+
+                                                                                               ⣀⣤⣤⣤⣀⣀
+                                                                                            ⣠⣶⣿⣿⣿⣿⣿⣿⣿⣿⣦⣤⣤⣤⣤⣤⣤⡀
+                                                                                          ⢀⣾⣿⣿⠿⠋⠉⠉⢉⣭⣿⣿⣿⣿⣿⠿⣿⣿⣿⣿⣷⣄
+                                                                                         ⣀⣾⣿⣿⠃ ⣀⣴⣾⣿⣿⡿⠟⠋ ⣀⡀ ⠈⠙⢿⣿⣿⣧
+                                                                                      ⣀⣶⣿⣿⣿⣿⡇ ⢸⣿⣿⡿⠛⠉⢀⣠⣴⣿⣿⣿⣷⣦⣀⠈⢻⣿⣿⡇
+                                                                                     ⣰⣿⣿⡿⢿⣿⣿⡇ ⢸⣿⣿⢀⣤⣶⣿⣿⣿⠟⠛⠻⣿⣿⣿⣿⣮⣿⣿⡷
+                                                                                    ⢰⣿⣿⡟⠁⢸⣿⣿⡇ ⢸⣿⣿⣿⣿⠿⠿⣿⣿⣿⣦⣄⡀⠈⠛⠿⣿⣿⣿⣧⡀
+                                                                                    ⣾⣿⣿⠃ ⢸⣿⣿⡇ ⢸⣿⣿⠋⠁  ⠈⠙⢻⣿⣿⣿⣶⣤⡀ ⠹⢿⣿⣷⡄
+                                                                                    ⢸⣿⣿⣇ ⠸⣿⣿⣷⣦⣼⣿⣿      ⢸⣿⣿⠻⢿⣿⣿⡇ ⠘⣿⣿⣿
+                                                                                    ⠈⢿⣿⣿⣦⡀⠈⠛⠿⣿⣿⣿⣿⣄⡀  ⢀⣠⣼⣿⣿  ⣿⣿⡇  ⣿⣿⣿⠇
+                                                                                      ⢻⣿⣿⣿⣷⣦⣀⠈⠙⠻⣿⣿⣿⣶⣶⣿⣿⣿⣿⣿  ⣿⣿⡇ ⣠⣿⣿⣿
+                                                                                      ⢸⣿⣿⡿⢿⣿⣿⣿⣦⣠⣴⣿⣿⣿⡿⠟⠋⢸⣿⣿  ⣿⣿⣷⣴⣿⣿⣿⠃
+                                                                                      ⠘⣿⣿⣷ ⠈⠛⢿⣿⣿⣿⠿⠋⠉ ⣠⣴⣿⣿⣿  ⣿⣿⣿⣿⣿⠟⠁
+                                                                                       ⠻⣿⣿⣿⣤⣀ ⠈⠉ ⢀⣤⣶⣿⣿⣿⠿⠟⠁ ⣰⣿⣿⡟⠋⠁
+                                                                                        ⠈⠿⣿⣿⣿⣿⣶⣾⣿⣿⣿⣿⠟⠋⠁  ⣠⣼⣿⣿⡟
+                                                                                           ⠙⠛⠛⠛⠻⠛⢿⣿⣿⣿⣿⣷⣾⣿⣿⣿⡿⠏
+                                                                                                  ⠈⠙⠛⠿⠿⠿⠿⠛⠉
+
+
+
+
+
+
+
+
+
+
+
+
+
+› Ask Codex to do anything
+
+  GPT-6-Luna default · /tmp/codex-scratch/repo
+  ? for shortcuts

test/fixtures/codex-dialogs/implement-plan.txt

@@ -0,0 +1,50 @@
+› I want to add a greeting file. Before planning, ask me which language the greeting should be in, using your question tool with a few options.
+• Questions 1/1 answered
+  • Which language should the greeting file use?
+    answer: English (Recommended)
+
+• Questions 2/2 answered
+  • What should the greeting file be named?
+    answer: greeting.txt (Recommended)
+  • What greeting should it contain?
+    answer: Hello, world! (Recommended)
+
+• Explored
+  └ List rg --files -g AGENTS.md -g '*greet*' -g 'README*' -g Makefile -g pyproject.toml -g package.json -g calc.py
+    + Show details
+
+• Proposed Plan
+
+
+  # Add an English Greeting File
+
+  ## Summary
+
+  Create greeting.txt in the repository root containing Hello, world!.
+
+  ## Changes
+
+  • Add the greeting as plain text, followed by a newline.
+  • No public APIs or existing files need to change.
+
+  ## Acceptance Check
+
+  • Confirm greeting.txt exists at the repository root and contains exactly Hello, world! on its first line.
+
+  ## Assumptions
+
+  • Use the selected filename and greeting.
+  • Keep the file as plain text.
+
+
+  Worked for 1m 47s • 4:27 AM
+
+
+  Implement this plan?
+
+
+› 1. Yes, implement this plan          Switch to Default and start coding
+  2. Yes, clear context and implement  Start a fresh thread (current context: 2% used)
+  3. No, stay in Plan mode             Continue planning with the model
+
+  enter select · esc back

test/fixtures/codex-dialogs/model-popup.txt

@@ -0,0 +1,50 @@
+› I want to add a greeting file. Before planning, ask me which language the greeting should be in, using your question tool with a few options.
+• Questions 1/1 answered
+  • Which language should the greeting file use?
+    answer: English (Recommended)
+
+• Questions 2/2 answered
+  • What should the greeting file be named?
+    answer: greeting.txt (Recommended)
+  • What greeting should it contain?
+    answer: Hello, world! (Recommended)
+
+• Explored
+  └ List rg --files -g AGENTS.md -g '*greet*' -g 'README*' -g Makefile -g pyproject.toml -g package.json -g calc.py
+    + Show details
+
+• Proposed Plan
+
+
+  # Add an English Greeting File
+
+  ## Summary
+
+  Create greeting.txt in the repository root containing Hello, world!.
+
+  ## Changes
+
+  • Add the greeting as plain text, followed by a newline.
+  • No public APIs or existing files need to change.
+
+  ## Acceptance Check
+
+  • Confirm greeting.txt exists at the repository root and contains exactly Hello, world! on its first line.
+
+  ## Assumptions
+
+  • Use the selected filename and greeting.
+  • Keep the file as plain text.
+
+
+  Worked for 1m 47s • 4:27 AM
+
+
+  Select Model and Effort
+
+
+› 1. GPT-6-Luna (current)  Fast and affordable model for easier tasks.
+  2. GPT-5.6-Terra         Older balanced model for straightforward work.
+  3. GPT-5.6-Luna          Older fast and efficient model.
+
+  enter select · esc back

test/fixtures/codex-dialogs/network-escalation-approval.txt

@@ -0,0 +1,50 @@
+› Edit calc.py to add a function sub(a, b) that returns a - b. Use your file editing tool, not a shell command.
+• Edited calc.py (+4 -0)
+    3 +
+    4 +
+    5 +def sub(a, b):
+    + Show details
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+✘ Failed to apply patch
+  └ (error details unavailable)
+    + Show details
+
+
+› Use curl to fetch https://example.com and tell me the HTTP status code.
+
+
+• I’ll use curl to fetch the URL and report the response status.
+
+• Failed (exit 6) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ curl: (6) Could not resolve host: example.com
+    000
+
+• curl couldn’t resolve example.com in the sandbox, so it returned status 000. I need network access to fetch it.
+
+  Worked for 3s • 4:24 AM
+
+
+› Request approval to rerun that curl with network access (escalated permissions).
+
+
+• I’ll request approval to rerun the same curl command with network access.
+
+• Running curl -sS -o /dev/null -w '%{http_code}' https://example.com
+
+
+  Would you like to run the following command?
+
+  Environment: local
+
+  Reason: May I rerun curl with network access to fetch https://example.com and report its HTTP status?
+
+  $ curl -sS -o /dev/null -w '%{http_code}' https://example.com
+
+
+› 1. Yes, proceed (y)
+  2. Yes, and don't ask again for commands that start with `curl -sS -o /dev/null -w '%{http_code}' https://example.com` (p)
+  3. No, and tell Codex what to do differently (esc)
+
+  Press enter to confirm or esc to cancel

test/fixtures/codex-dialogs/permissions-popup.txt

@@ -0,0 +1,50 @@
+
+› Run: touch second.txt (needs approval outside the sandbox)
+
+
+• Creating second.txt requires write access outside the read only sandbox. I’ll request approval to run that exact command.
+
+✗ You canceled the request to run touch second.txt
+
+• Failed (exit 1) touch second.txt
+  └ (no output)
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want a new file named color.txt. Ask me with your question tool which color to write in it (offer 3 options). Ask only that one question.
+
+
+• Explored · 1 failed
+  └ List rg --files -g color.txt -g AGENTS.md (exit 1)
+    + Show details
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna default for Default mode.
+
+
+› Reply with exactly these five lines as plain text, nothing else, no tools: 'Would you like to run the following command?' then '› 1. Yes, proceed (y)' then '  2. No, and tell Codex what to do
+  differently (esc)' then 'tab to add notes | enter to submit answer | esc to interrupt' then '  Press enter to confirm or esc to cancel'
+
+
+• Would you like to run the following command?
+  › 1. Yes, proceed (y)
+  2. No, and tell Codex what to do differently (esc)
+  tab to add notes | enter to submit answer | esc to interrupt
+  Press enter to confirm or esc to cancel
+
+  Worked for 1s • 4:31 AM
+
+
+  Update Model Permissions
+
+
+  1. Ask for approval     Read and edit workspace files and run commands, with approval required for internet access or edits outside the workspace
+  2. Approve for me       Only ask for actions detected as potentially unsafe
+  3. Full Access          Use with caution: Codex can edit files outside this workspace and access the internet without approval
+› 4. Read Only (current)  Read workspace files, with approval required for edits or internet access
+
+  enter select · esc back

test/fixtures/codex-dialogs/question-1of2.txt

@@ -0,0 +1,49 @@
+
+
+• I’ll use curl to fetch the URL and report the response status.
+
+• Failed (exit 6) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ curl: (6) Could not resolve host: example.com
+    000
+
+• curl couldn’t resolve example.com in the sandbox, so it returned status 000. I need network access to fetch it.
+
+  Worked for 3s • 4:24 AM
+
+
+› Request approval to rerun that curl with network access (escalated permissions).
+
+
+• I’ll request approval to rerun the same curl command with network access.
+
+✗ You canceled the request to run curl -sS -o /dev/null -w '%{http_code}' https://example.com
+
+• Failed (exit 1) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ (no output)
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want to add a greeting file. Before planning, ask me which language the greeting should be in, using your question tool with a few options.
+
+
+• Questions 1/1 answered
+  • Which language should the greeting file use?
+    answer: English (Recommended)
+
+• Explored
+  └ List rg --files -g AGENTS.md -g '*greet*' -g 'README*' -g Makefile -g pyproject.toml -g package.json -g calc.py
+    + Show details
+
+
+  Question 1/2 (2 unanswered)
+  What should the greeting file be named?
+
+  › 1. greeting.txt (Recommended)  Use a clear, conventional text filename.
+    2. README greeting             Add the greeting as a separate README-style Markdown file.
+    3. hello.txt                   Use a short, friendly filename.
+    4. None of the above           Optionally, add details in notes (tab)
+
+  tab to add notes | enter to submit answer | ←/→ to navigate questions | esc to interrupt

test/fixtures/codex-dialogs/question-2of2-submit-all.txt

@@ -0,0 +1,49 @@
+
+
+• I’ll use curl to fetch the URL and report the response status.
+
+• Failed (exit 6) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ curl: (6) Could not resolve host: example.com
+    000
+
+• curl couldn’t resolve example.com in the sandbox, so it returned status 000. I need network access to fetch it.
+
+  Worked for 3s • 4:24 AM
+
+
+› Request approval to rerun that curl with network access (escalated permissions).
+
+
+• I’ll request approval to rerun the same curl command with network access.
+
+✗ You canceled the request to run curl -sS -o /dev/null -w '%{http_code}' https://example.com
+
+• Failed (exit 1) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ (no output)
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want to add a greeting file. Before planning, ask me which language the greeting should be in, using your question tool with a few options.
+
+
+• Questions 1/1 answered
+  • Which language should the greeting file use?
+    answer: English (Recommended)
+
+• Explored
+  └ List rg --files -g AGENTS.md -g '*greet*' -g 'README*' -g Makefile -g pyproject.toml -g package.json -g calc.py
+    + Show details
+
+
+  Question 2/2 (1 unanswered)
+  What greeting should it contain?
+
+  › 1. Hello, world! (Recommended)  Use a short, familiar English greeting.
+    2. Welcome!                     Use a concise welcoming message.
+    3. Good morning!                Use a time-specific greeting.
+    4. None of the above            Optionally, add details in notes (tab)
+
+  tab to add notes | enter to submit all | ←/→ to navigate questions | esc to interrupt

test/fixtures/codex-dialogs/question-notes-typed.txt

@@ -0,0 +1,49 @@
+╭─────────────────────────────────────────────────╮
+│ ✨ Update available! 0.162.0 -> 0.162.1         │
+│ Run npm install -g @openai/codex to update.     │
+│                                                 │
+│ See full release notes:                         │
+│ https://github.com/openai/codex/releases/latest │
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want a file named animal.txt. Use your question tool to ask me which animal to write in it, with 3 options. Ask only that one question.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  Question 1/1 (1 unanswered)
+  Which animal should I write in animal.txt?
+
+  › 1. Cat                Write “cat” in the file.
+    2. Dog                Write “dog” in the file.
+    3. Elephant           Write “elephant” in the file.
+    4. None of the above  Optionally, add details in notes (tab)
+
+  › abc
+
+  tab or esc to clear notes | enter to submit answer

test/fixtures/codex-dialogs/question-notes.txt

@@ -0,0 +1,49 @@
+╭─────────────────────────────────────────────────╮
+│ ✨ Update available! 0.162.0 -> 0.162.1         │
+│ Run npm install -g @openai/codex to update.     │
+│                                                 │
+│ See full release notes:                         │
+│ https://github.com/openai/codex/releases/latest │
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want a file named animal.txt. Use your question tool to ask me which animal to write in it, with 3 options. Ask only that one question.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  Question 1/1 (1 unanswered)
+  Which animal should I write in animal.txt?
+
+  › 1. Cat                Write “cat” in the file.
+    2. Dog                Write “dog” in the file.
+    3. Elephant           Write “elephant” in the file.
+    4. None of the above  Optionally, add details in notes (tab)
+
+  › Add notes
+
+  tab or esc to clear notes | enter to submit answer

test/fixtures/codex-dialogs/question-option2-selected.txt

@@ -0,0 +1,49 @@
+    + Show details
+
+
+› Use curl to fetch https://example.com and tell me the HTTP status code.
+
+
+• I’ll use curl to fetch the URL and report the response status.
+
+• Failed (exit 6) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ curl: (6) Could not resolve host: example.com
+    000
+
+• curl couldn’t resolve example.com in the sandbox, so it returned status 000. I need network access to fetch it.
+
+  Worked for 3s • 4:24 AM
+
+
+› Request approval to rerun that curl with network access (escalated permissions).
+
+
+• I’ll request approval to rerun the same curl command with network access.
+
+✗ You canceled the request to run curl -sS -o /dev/null -w '%{http_code}' https://example.com
+
+• Failed (exit 1) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ (no output)
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want to add a greeting file. Before planning, ask me which language the greeting should be in, using your question tool with a few options.
+
+
+• Explored
+  └ List rg --files -g AGENTS.md -g '*greet*' -g 'README*' -g Makefile -g pyproject.toml -g package.json -g calc.py
+    + Show details
+
+
+  Question 1/1 (1 unanswered)
+  Which language should the greeting file use?
+
+    1. English (Recommended)  Write a simple greeting in English.
+  › 2. French                 Write a simple greeting in French.
+    3. Spanish                Write a simple greeting in Spanish.
+    4. None of the above      Optionally, add details in notes (tab)
+
+  tab to add notes | enter to submit answer | esc to interrupt

test/fixtures/codex-dialogs/question-w36.txt

@@ -0,0 +1,29 @@
+
+
+• Explored · 1 failed
+  └ List rg --files -g color.txt -g
+         AGENTS.md (exit 1)
+    + Show details
+
+
+  Question 1/1 (1 unanswered)
+  Which color should I write in
+  `color.txt`?
+
+  › 1. Blue             Write the
+                        color
+                        blue.
+    2. Green            Write the
+                        color
+                        green.
+    3. Red              Write the
+                        color red.
+    4. None of the      Optionally
+       above            , add
+                        details in
+                        notes
+                        (tab)
+
+  tab to add notes
+  enter to submit answer
+  esc to interrupt

test/fixtures/codex-dialogs/question-w60.txt

@@ -0,0 +1,29 @@
+› Run: touch second.txt (needs approval outside the sandbo…
+
+■ Conversation interrupted - use /feedback if something went
+wrong
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want a new file named color.txt. Ask me with your
+  question tool which color to write in it (offer 3
+  options). Ask only that one question.
+
+
+• Explored · 1 failed
+  └ List rg --files -g color.txt -g AGENTS.md (exit 1)
+    + Show details
+
+
+  Question 1/1 (1 unanswered)
+  Which color should I write in `color.txt`?
+
+  › 1. Blue               Write the color blue.
+    2. Green              Write the color green.
+    3. Red                Write the color red.
+    4. None of the above  Optionally, add details in notes
+                          (tab)
+
+  tab to add notes | enter to submit answer
+  esc to interrupt

test/fixtures/codex-dialogs/question.txt

@@ -0,0 +1,49 @@
+    + Show details
+
+
+› Use curl to fetch https://example.com and tell me the HTTP status code.
+
+
+• I’ll use curl to fetch the URL and report the response status.
+
+• Failed (exit 6) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ curl: (6) Could not resolve host: example.com
+    000
+
+• curl couldn’t resolve example.com in the sandbox, so it returned status 000. I need network access to fetch it.
+
+  Worked for 3s • 4:24 AM
+
+
+› Request approval to rerun that curl with network access (escalated permissions).
+
+
+• I’ll request approval to rerun the same curl command with network access.
+
+✗ You canceled the request to run curl -sS -o /dev/null -w '%{http_code}' https://example.com
+
+• Failed (exit 1) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ (no output)
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want to add a greeting file. Before planning, ask me which language the greeting should be in, using your question tool with a few options.
+
+
+• Explored
+  └ List rg --files -g AGENTS.md -g '*greet*' -g 'README*' -g Makefile -g pyproject.toml -g package.json -g calc.py
+    + Show details
+
+
+  Question 1/1 (1 unanswered)
+  Which language should the greeting file use?
+
+  › 1. English (Recommended)  Write a simple greeting in English.
+    2. French                 Write a simple greeting in French.
+    3. Spanish                Write a simple greeting in Spanish.
+    4. None of the above      Optionally, add details in notes (tab)
+
+  tab to add notes | enter to submit answer | esc to interrupt

test/fixtures/codex-dialogs/review-popup.txt

@@ -0,0 +1,50 @@
+
+› Run: touch second.txt (needs approval outside the sandbox)
+
+
+• Creating second.txt requires write access outside the read only sandbox. I’ll request approval to run that exact command.
+
+✗ You canceled the request to run touch second.txt
+
+• Failed (exit 1) touch second.txt
+  └ (no output)
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want a new file named color.txt. Ask me with your question tool which color to write in it (offer 3 options). Ask only that one question.
+
+
+• Explored · 1 failed
+  └ List rg --files -g color.txt -g AGENTS.md (exit 1)
+    + Show details
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna default for Default mode.
+
+
+› Reply with exactly these five lines as plain text, nothing else, no tools: 'Would you like to run the following command?' then '› 1. Yes, proceed (y)' then '  2. No, and tell Codex what to do
+  differently (esc)' then 'tab to add notes | enter to submit answer | esc to interrupt' then '  Press enter to confirm or esc to cancel'
+
+
+• Would you like to run the following command?
+  › 1. Yes, proceed (y)
+  2. No, and tell Codex what to do differently (esc)
+  tab to add notes | enter to submit answer | esc to interrupt
+  Press enter to confirm or esc to cancel
+
+  Worked for 1s • 4:31 AM
+
+
+  Select a review preset
+
+
+› 1. Review against a base branch  (PR Style)
+  2. Review uncommitted changes
+  3. Review a commit
+  4. Custom review instructions
+
+  enter select · esc back

test/fixtures/codex-dialogs/slash-popup.txt

@@ -0,0 +1,49 @@
+› Edit calc.py to add a function sub(a, b) that returns a - b. Use your file editing tool, not a shell command.
+
+• Explored
+  └ Read calc.py
+    + Show details
+
+• Edited calc.py (+4 -0)
+    3 +
+    4 +
+    5 +def sub(a, b):
+    + Show details
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+✘ Failed to apply patch
+  └ (error details unavailable)
+    + Show details
+
+
+› Use curl to fetch https://example.com and tell me the HTTP status code.
+
+
+• I’ll use curl to fetch the URL and report the response status.
+
+• Failed (exit 6) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ curl: (6) Could not resolve host: example.com
+    000
+
+• curl couldn’t resolve example.com in the sandbox, so it returned status 000. I need network access to fetch it.
+
+  Worked for 3s • 4:24 AM
+
+
+› Request approval to rerun that curl with network access (escalated permissions).
+
+
+• I’ll request approval to rerun the same curl command with network access.
+
+✗ You canceled the request to run curl -sS -o /dev/null -w '%{http_code}' https://example.com
+
+• Failed (exit 1) curl -sS -o /dev/null -w '%{http_code}' https://example.com
+  └ (no output)
+
+■ Conversation interrupted - use /feedback if something went wrong
+› /plan  switch to Plan mode
+
+› /plan
+
+  GPT-6-Luna default · /tmp/codex-scratch/repo · Request approval to create file

test/fixtures/codex-dialogs/transcript-quotes-dialog.txt

@@ -0,0 +1,50 @@
+› I want to add a greeting file. Before planning, ask me which language the greeting should be in, using your question tool with a few options.
+
+• Model changed to gpt-6-luna default for Default mode.
+
+
+› Run: touch second.txt (needs approval outside the sandbox)
+
+
+• Creating second.txt requires write access outside the read only sandbox. I’ll request approval to run that exact command.
+
+✗ You canceled the request to run touch second.txt
+
+• Failed (exit 1) touch second.txt
+  └ (no output)
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna medium for Plan mode.
+
+
+› I want a new file named color.txt. Ask me with your question tool which color to write in it (offer 3 options). Ask only that one question.
+
+
+• Explored · 1 failed
+  └ List rg --files -g color.txt -g AGENTS.md (exit 1)
+    + Show details
+
+■ Conversation interrupted - use /feedback if something went wrong
+
+• Model changed to gpt-6-luna default for Default mode.
+
+
+› Reply with exactly these five lines as plain text, nothing else, no tools: 'Would you like to run the following command?' then '› 1. Yes, proceed (y)' then '  2. No, and tell Codex what to do
+  differently (esc)' then 'tab to add notes | enter to submit answer | esc to interrupt' then '  Press enter to confirm or esc to cancel'
+
+
+• Would you like to run the following command?
+  › 1. Yes, proceed (y)
+  2. No, and tell Codex what to do differently (esc)
+  tab to add notes | enter to submit answer | esc to interrupt
+  Press enter to confirm or esc to cancel
+  └ Tip: NEW: Network proxy can now be enabled from /experimental. Restart Codex after enabling it.
+
+  Worked for 1s • 4:31 AM
+
+
+› Ask Codex to do anything
+
+  GPT-6-Luna default · /tmp/codex-scratch/repo · Request approval to create file
+  ? for shortcuts

test/fixtures/codex-dialogs/trust-dialog-w40.txt

@@ -0,0 +1,17 @@
+
+  Folder access
+  /tmp/codex-scratch/repo
+
+  Trust this folder? Codex can read,
+  edit, and run files here, subject to
+  your permission settings. Folder
+  settings can run code automatically,
+  even without a model request.
+  Continue only if you trust these
+  files. Your trust decision will be
+  saved.
+
+› 1. Trust and continue
+  2. Quit
+
+  enter continue · esc quit

test/fixtures/codex-dialogs/trust-dialog.txt

@@ -0,0 +1,11 @@
+
+  Folder access
+  /tmp/codex-scratch/repo
+
+  Trust this folder? Codex can read, edit, and run files here, subject to your permission settings. Folder settings can run code automatically, even without a model request. Continue only if you
+  trust these files. Your trust decision will be saved.
+
+› 1. Trust and continue
+  2. Quit
+
+  enter continue · esc quit

test/fixtures/codex-dialogs/working.txt

@@ -0,0 +1,50 @@
+╭─────────────────────────────────────────────────╮
+│ ✨ Update available! 0.162.0 -> 0.162.1         │
+│ Run npm install -g @openai/codex to update.     │
+│                                                 │
+│ See full release notes:                         │
+│ https://github.com/openai/codex/releases/latest │
+╰─────────────────────────────────────────────────╯
+
+
+  >_ OpenAI Codex (v0.162.0)
+     /tmp/codex-scratch/repo
+
+
+› Run the shell command: touch created.txt (it needs write access, ask me for approval to run it outside the sandbox)
+
+
+• touch created.txt needs write access in the workspace. I’ll request approval to run that exact command outside the read only sandbox.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+• Working (1s • esc to interrupt)
+
+
+› Ask Codex to do anything
+
+  GPT-6-Luna default · /tmp/codex-scratch/repo · ⠧
+  ? for shortcuts