docs(agent-skill): say the skill is on by default and stays out of git

Every place that called the Codeman Agent Skill setting off by default now
says it is on by default since 1.50.0, where to turn it off, and that turning
it off still removes no copy already written (`codeman skill uninstall --case
<name>` does). The README, the wiki's Codeman Skill page and the FAQ say an
agent inside Codeman usually has the skill without an install step, and that
the copy ignores itself in git.

Also written down: an install whose App Settings were saved on an earlier
version stored the old default and stays off until switched on; with the
Claude Code plugin installed, Claude Code lists the skill twice (both work);
and, in the invariants, the self-ignoring `.gitignore` rules and the
measurement that Claude Code 2.1.319 never runs `git check-ignore` on a skill
folder. The agent control plan keeps its original default-off decision and
gains a dated note for the flip.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

docs/wiki/Codeman-Skill.md

@@ -43,7 +43,11 @@ DeepSeek Harness worker on a local qwen model and a Claude Code worker power on
 
 ## Install it
 
-Pick one route. The skill only acts inside a Codeman session, so a global install is safe.
+Usually you do not have to: since 1.50.0 Codeman puts the skill into every new session's
+folder by default (the Web UI row below), where that session's CLI looks for skills. The copy
+ignores itself in git, so your repository never lists it as a new file.
+
+Otherwise pick one route. The skill only acts inside a Codeman session, so a global install is safe.
 
 | How                | Command                                                                         | Scope |
 | ------------------ | ------------------------------------------------------------------------------- | ----- |
@@ -51,10 +55,13 @@ Pick one route. The skill only acts inside a Codeman session, so a global instal
 | Claude Code plugin | `/plugin marketplace add Ark0N/Codeman`, then `/plugin install codeman@codeman` | Global, through Claude Code's plugin manager. `/plugin update codeman` follows releases. |
 | Bundled CLI        | `codeman skill install`                                                         | Global, at `~/.claude/skills/codeman`. |
 | Bundled CLI        | `codeman skill install --case <name> [--mode <mode>]`                           | One case. `--mode codex` (or any other run mode) writes it where that CLI looks for skills. |
-| Web UI             | **App Settings → Agents & CLIs → All agent CLIs → Codeman Agent Skill**         | Injects it into each case when a session is created, where that session's CLI looks: `.claude/skills/` for Claude Code, `.agents/skills/` for Codex, Gemini CLI, OpenCode, Antigravity, Grok, DeepSeek and OMP. Off by default. |
+| Web UI             | **App Settings → Agents & CLIs → All agent CLIs → Codeman Agent Skill**         | Injects it into each case when a session is created, where that session's CLI looks: `.claude/skills/` for Claude Code, `.agents/skills/` for Codex, Gemini CLI, OpenCode, Antigravity, Grok, DeepSeek and OMP. On by default since 1.50.0. |
 
 Use the plugin **or** `codeman skill install`, not both: a Claude Code with both lists the
-skill twice (`codeman` and `codeman:codeman`).
+skill twice (`codeman` and `codeman:codeman`). The Web UI copy counts too, and it is on by
+default: with the plugin installed, Claude Code sessions in Codeman list the skill twice.
+Both work. Turn **Codeman Agent Skill** off if the duplicate bothers you (other CLIs then
+lose their copy too), or use the Web UI copy instead of the plugin.
 
 The web UI route skips pi, because a project skill makes pi ask to trust the folder at
 startup. A pi or plain shell session uses the [`codeman agent`
@@ -67,9 +74,15 @@ same verbs as shell commands.
 Codeman-managed copy in that case, whichever CLI's directory it sits in). It never touches a
 `skills/codeman` you wrote yourself.
 
-Turning the web UI setting back off **does not remove copies it already injected**, because
+To stop the Web UI copy, turn **App Settings → Agents & CLIs → All agent CLIs → Codeman Agent
+Skill** off. It is on by default since 1.50.0: a settings file without the setting means on,
+and only switching it off turns it off. An install whose App Settings were saved on an
+earlier version stored the old default (off), so there it stays off until you switch it on.
+
+Turning the web UI setting off **does not remove copies it already injected**, because
 a sweep at session start would pull the skill out from under other live sessions sharing
-that directory. Remove them per case with `codeman skill uninstall --case <name>`.
+that directory. Remove them per case with `codeman skill uninstall --case <name>`, which
+also removes the copy's `.gitignore`.
 
 ## Then just ask
 

docs/wiki/Driving-Codeman-From-An-Agent.md

@@ -14,6 +14,10 @@ A skill in the `SKILL.md` format that Claude Code, Codex, Gemini CLI, OpenCode,
 and most other agent CLIs read. It teaches the agent the whole API, so you ask in plain
 English instead of pasting endpoint documentation into prompts:
 
+Since 1.50.0 Codeman puts it into every new session's folder by default (App Settings →
+Agents & CLIs → **Codeman Agent Skill**), so an agent inside Codeman usually has it already.
+For pi, or a copy that does not depend on that setting:
+
 ```bash
 codeman skill install    # or: npx skills add Ark0N/Codeman --skill codeman -g
 ```

docs/wiki/FAQ.md

@@ -215,7 +215,9 @@ Yes. Codeman ships an agent skill that lets an agent inside a session drive the
 list sessions, spawn workers in any installed CLI, send prompts, and block until a worker's
 turn finishes. Install it once with `codeman skill install` or the Claude Code plugin, then
 ask in plain English, for example *"use codeman to start 5 claude workers, one per TODO
-item"*. The web UI setting that injects it into every new session's case is off by default.
+item"*. Since 1.50.0 Codeman also injects it into every new session's case by default, so an
+agent inside Codeman usually has it already (App Settings → Agents & CLIs → **Codeman Agent
+Skill** turns that off).
 
 See [The Codeman Skill](Codeman-Skill), with recordings of real runs, and
 [Driving Codeman From An Agent](Driving-Codeman-From-An-Agent) for the other routes.

docs/wiki/Git-Worktrees.md

@@ -17,7 +17,7 @@ lists mark a session that runs in one with a `⑂ <name>` pill.
 
 The main checkout does not show the worktrees as untracked: Codeman adds `/.claude/worktrees/`
 (and `/.claude/settings.local.json`, the hooks file it writes for every Claude session, plus the
-`codeman` folder it writes when **Codeman Agent Skill** is on) to the repository's local
+`codeman` folder it writes while **Codeman Agent Skill** is on, the default) to the repository's local
 `.git/info/exclude` when git does not ignore them already. Without that, those files would make
 every worktree look modified and git would refuse to remove it. Your tracked `.gitignore` is
 never touched.

docs/wiki/Settings-Reference.md

@@ -202,7 +202,7 @@ instead of its native cloud backend. See [Custom Model Endpoints](Custom-Model-E
 | Ralph / Todo Tracker             | Enables the Ralph loop surfaces.                                                               |
 | Agent Teams                      | Experimental teams. Also needs the CLI's own environment flag.                                 |
 | Pin tab names on the CLI         | Launches every Claude session with `--name` set to its tab name, so Claude Code's prompt label and `/resume` list match your tabs. Claude then stops generating its own titles for those sessions, and a rename in Codeman holds only until the next turn. Synced, off by default; applies from the next session start or respawn. |
-| Codeman Agent Skill              | Under **All agent CLIs**. Injects the agent skill into each new session's case, where that session's CLI looks for skills (every CLI except Pi and a plain shell). Off by default. See [The Codeman Skill](Codeman-Skill). |
+| Codeman Agent Skill              | Under **All agent CLIs**. Injects the agent skill into each new session's case, where that session's CLI looks for skills (every CLI except Pi and a plain shell). On by default since 1.50.0; the copy ignores itself in git, so your repository never lists it. Off stops new copies but removes none (`codeman skill uninstall --case <name>` does). See [The Codeman Skill](Codeman-Skill). |
 | Remote auto-reconnect            | Reattaches dropped remote SSH sessions. On by default.                                         |
 | Nice priority / value            | Runs agent processes at a lower CPU priority.                                                  |
 | Default Codex model              | Model for new local Codex sessions; empty uses Codex's own config. Letters, digits, `.` `_` `-` `/` only. |