diff --git a/.claude-plugin/marketplace.json b/.claude-plugin/marketplace.json index b310fb74..539df457 100644 --- a/.claude-plugin/marketplace.json +++ b/.claude-plugin/marketplace.json @@ -10,7 +10,7 @@ "name": "codeman", "source": "./plugins/codeman", "description": "Drive Codeman from inside a Claude Code session: spawn worker sessions, prompt them, wait for them, read their answers, clean up. Acts only inside a Codeman-managed session.", - "version": "1.41.1", + "version": "1.42.0", "author": { "name": "Ark0N", "url": "https://github.com/Ark0N" diff --git a/CHANGELOG.md b/CHANGELOG.md index a0c8ab39..a83158a0 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -1,5 +1,40 @@ # aicodeman +## 1.42.0 + +### Minor Changes + +- 1238316: ### Thanks + - @JDProfresh for five PRs: prompt uploads that take documents (#621, from the plan in #553), a video Codeman cannot take refused before it uploads (#622), a prompt-cache readout kept to the CLIs that report one and a statusline report with many cache-miss causes no longer thrown away (#623), and two fixes for Claude's workspace trust dialog in a brand-new folder: idle waits that hold until the dialog is answered (#634) and a dialog that gets answered every time (#635). + - @Randalix for Codex prompts that really get submitted, sent as one bracketed paste and a separate Enter (#628), and for the careful measurements in #627 that found the cause. + - @ludovicfourrage, a first-time contributor, for reporting (#629) and fixing (#632) the nested tmux status bar colour that leaked into live output after a history reload. + - @opticon454 for three PRs: a one-time "what's new" note after each update (#618), Previous and Next Session as rebindable shortcuts that refuse a chord another action already uses (#617), and a DeepSeek install from CLI management that ends with a DeepSeek you can run (#616). + + **Git worktrees for a case (#625).** Give every agent on a repository its own checkout. Pick a case whose folder is a git repository, choose **Git worktrees…** in the case picker (**Worktrees** on the phone's case sheet), type a name and pick the CLI: Codeman creates `/.claude/worktrees/` on a new branch `worktree-` and opens a session there, in a tab named after the worktree. **Open** starts another session in a worktree you already have. Removing one runs plain `git worktree remove`, never `--force`, so uncommitted work stays where it is, and Close Session can kill the session and remove its worktree in one go. The layout is the one Claude Code's own `claude --worktree` uses, so each sees the other's worktrees. To keep the main checkout clean, Codeman lists the worktrees folder and the files it writes for sessions in the repository's local `.git/info/exclude`; your `.gitignore` is never touched. + + **Codex sessions turn red when Codex asks you something (#624).** Codex's command and edit approvals, its question dialogs and the trust prompt on a new repository are read straight off the screen and raised the way a Claude permission prompt is: red tab, desktop notification, push, webhook, the phone's NEEDS YOU row and an Approvals Inbox card that tells you to answer in the terminal. An agent driving a codex worker can now wait for that with `until=blocked`. + + **Prompt uploads take documents (#621).** Attach, drop or paste a PDF, a Word, PowerPoint or Excel file, a zip, or a text file (txt, md, csv, tsv, json, log, yaml, xml) and its path lands on your prompt, ready to send, like a photo or a video does. Every file is checked against its actual bytes on the way in, so a program renamed to `.pdf` is refused, and text files must be UTF-8. The saved name keeps a readable part of the original: `Q3 report.pdf` is saved as `paste-...-Q3-report.pdf`. The button in the Compose and paste dialogs now says Attach. + + **Previous and Next Session are rebindable (#617).** Previous Session (Alt/Option+[) and the alternate Next Session (Alt/Option+]) are now ordinary rows in App Settings > Shortcuts, so you can rebind or switch them off like everything else. Capturing a chord another action already uses is refused with a message naming that action (Alt+1 to 9, Ctrl/Shift+Enter and Ctrl/Cmd+V stay reserved), and re-enabling or resetting a shortcut runs the same check. A chord you rebound no longer also types into the terminal: a rebind to Alt+J used to switch tabs and send ESC j to the session too. Built-in defaults like Ctrl+L still reach the CLI. + + **A note after each update (#618).** The first time a browser loads a newer Codeman, a toast lists that release's headline changes, with a **See what's new** button that opens the full release notes. It shows once per version, and a browser that has never opened Codeman before just records the version and stays quiet, so the first note you will see is the one for the release after this one. The headlines are taken from the changelog when the release is cut. + + **Multi-user mode: only admins change server-wide settings.** In multi-user mode any signed-in regular user could rewrite the server's settings (feature switches, run mode, case order, the default model for cron and the orchestrator, the app config), start a self-update, rotate the tunnel QR code, clear stale session state, and sign every user out with Revoke All, admins included. They could also read the Deepgram API key an admin saved. Those writes and operations now answer 403 to a regular user, Revoke All signs them out of their own logins only, and their settings read leaves out the admin's key and case names. In the browser a regular user's per-device settings still save, a change to a server-wide setting shows one notice that only an admin can change it, instead of pretending it was saved, and their own run mode and respawn presets are kept on their device. Single-user mode is unchanged. + + **Fixes.** + - **Codex submits long prompts (#628).** Prompts sent through the API, `codeman agent send`, the MCP server, cron or the agent skill go into the pane as one bracketed paste followed by a separate Enter, so Codex no longer leaves them sitting unsent in its composer. A single character (a menu answer like `3` or `y`) is still typed, so numbered dialogs keep picking the option you sent, and a trailing `;` survives, so `find . -exec rm {} \;` arrives whole. + - **New Claude sessions in an untrusted folder (#634, #635).** An agent waiting for a fresh session to go idle no longer gets its answer while the workspace trust dialog is still up, so its first prompt can no longer press Enter on the highlighted "No, exit" and kill the session it just started. And the dialog is now answered every time: a screen read that came too soon after the previous one used to be dropped, which now and then left a new session sitting on the dialog. Deleting a session while the dialog is up also stops Codeman reading its dead pane for seconds afterwards. + - **Nested tmux colours after a history reload (#632).** Opening a remote or Docker case, or a shell running tmux inside it, no longer hands the nested tmux status bar's green background to whatever the agent prints next. + - **The codeman skill with arguments (#642).** The skill works again when Claude Code loads it with arguments ("use codeman to start 5 claude workers"). Claude Code swaps a skill's `$1` and `$2` for words of your request, which broke the pasted helpers; they now use `${1}` and `${2}`, and a cached copy written by the broken version is rewritten on the next run. + - **DeepSeek installs ready to run (#616).** Installing the terminal profile finds the `pnpm` next to `dsh` even when the server's own PATH lacks `~/.local/bin`, and the DeepSeek install command adds `pnpm` when the machine has none. + - **Unsupported videos refused up front (#622).** An Android `.3gp` or an `.mkv` gets "Unsupported file type" right away, instead of uploading up to a gigabyte and failing at the end. + - **Statusline reports (#623).** The prompt-cache readout is stored only for CLIs whose statusline reports one (Claude today), like the model badge, and a Claude report with more than 20 cache-miss causes keeps the first 20 instead of being refused, which used to blank the footer and the plan-usage chip. + + **Fixes applied while landing.** Removing a worktree that is, sits inside or holds a Docker case's workspace is refused before git runs; it would have deleted the folder a container still mounts (#625). Codex's trust prompt also reads as blocked in the variant reached through its "Update available" screen, which ends in "esc back" (#624). The DeepSeek install only adds `pnpm` when none is on PATH, so a machine with a corepack `pnpm` keeps it instead of the whole install failing (#616). Three statements in the upload docs were corrected: only a local agent and a Docker case share the uploads folder (remote sessions are refused), GIFs keep their frames instead of being re-encoded, and a developer note no longer names a release that never shipped (#621). The update note skips the Thanks list and group labels like "Fixes.", still works for a release with no headlines, and is translated for zh-CN (#618). + + **Docs.** The README and its Chinese translation caught up with 1.41.0 and 1.41.1 and show a sharper hero GIF, the Codeman Skill got a wiki page and two GIFs linked from both READMEs, CLAUDE.md was split into the root file, `src/web/CLAUDE.md` and `docs/releasing.md`, the release steps now include the MCP registry publish, and a new note says where video and GIF masters live (not on GitHub). + ## 1.41.1 ### Patch Changes diff --git a/CLAUDE.md b/CLAUDE.md index adb38400..76422a7c 100644 --- a/CLAUDE.md +++ b/CLAUDE.md @@ -13,7 +13,7 @@ This file provides guidance to Claude Code (claude.ai/code) when working with co | Task | Command | | ----------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | Dev server | `npm run dev` (or `npx tsx src/index.ts web`) | -| Type check | `npm run typecheck` (= `tsc --noEmit`) | +| Type check | `npm run typecheck` (= `tsc --noEmit` + `tsc -p config/tsconfig.scripts.json`) | | Lint | `npm run lint` (fix: `npm run lint:fix`) | | Format | `npm run format` (check: `npm run format:check`) | | Tests | `npm test` (the CI gate — safe to run bare) · one file: `npm test -- test/.test.ts` · see Testing for the excluded suites | @@ -52,7 +52,7 @@ Uses [Semantic Versioning](https://semver.org/) (`MAJOR.MINOR.PATCH`) via `@chan When the user says **COM** (`COM` = patch, `COM minor`, `COM major`): **Read [`docs/releasing.md`](docs/releasing.md) and follow every step in order**; never improvise a release from memory. It covers the changeset, `npm run version-packages`, the `**Version**` line below, the branch check and explicit-path commit, deploy, the getcodeman.com badge, watching BOTH CI workflows, the MCP registry publish, and the Discussions announcement. -**Version**: 1.41.1 (must match `package.json`) +**Version**: 1.42.0 (must match `package.json`) ## Project Overview @@ -124,9 +124,9 @@ Codeman is a Claude Code session manager with web interface and autonomous Ralph ### Key Patterns -**Input**: `session.writeViaMux()` for programmatic/curl input via tmux `send-keys -l` + `send-keys Enter`, single-line only. Interactive **browser** input goes through a durable **exactly-once** layer: a stable `clientId` + monotonic per-session `seq` persisted to localStorage until the server ACKs, so a dropped link cannot lose or double-deliver a prompt. `ws-connection-registry.ts` supersedes only same-TAB reconnects, so two tabs on one session coexist. → [architecture-invariants#input-delivery-and-ws-resilience](docs/architecture-invariants.md#input-delivery-and-ws-resilience) +**Input**: `session.writeViaMux()` for programmatic/curl input via one tmux bracketed paste (`paste-buffer -p`) + `send-keys Enter`, single-line only. A single character is typed with `send-keys -l` instead, because selection dialogs ignore a pasted digit. Interactive **browser** input goes through a durable **exactly-once** layer: a stable `clientId` + monotonic per-session `seq` persisted to localStorage until the server ACKs, so a dropped link cannot lose or double-deliver a prompt. `ws-connection-registry.ts` supersedes only same-TAB reconnects, so two tabs on one session coexist. → [architecture-invariants#input-delivery-and-ws-resilience](docs/architecture-invariants.md#input-delivery-and-ws-resilience) -**Agent wait primitives**: bounded long-polls: `GET /api/sessions/:id/wait`, `GET .../wait-output` (literal substring, **never** regex) and `wait`/`waitTimeout` on `POST .../input`. Registry `session-wait-registry.ts` (pure), bounds `config/agent-wait.ts`. ⚠️ A timeout is a 200 (`wait.timedOut`). ⚠️ `stop`/`blocked` exist for `claude` and `deepseek` ONLY (rule lives in `hooksAvailableForMode()`): explicit request elsewhere is a 400. ⚠️ Send-and-wait registers the waiter BEFORE the write; teardown must `notifySignal('exit')` BEFORE `cancelAll()`; hangup abort listens on `reply.raw` (guarded by `writableFinished`), never `req.raw`; liveness comes from `isPaneDead`, never `session.pid`. ⚠️ Signals are edge-triggered with no history: gather fan-outs via send-and-wait or `wait-output` markers. Packaged as the `skills/codeman` skill (`codeman skill install`, plugin marketplace, or injection behind `agentSkillEnabled`, SYNCED, default OFF, into the directory each CLI scans: `capabilities.agentSkillDir`, `.claude/skills` for claude, `.agents/skills` for the others, none for pi): injection is add-only, marker-owned (`applyAgentSkill`), refuses symlinks, and refreshes a marker-owned user-level copy (`refreshUserAgentSkill`). → [architecture-invariants#agent-wait-primitives](docs/architecture-invariants.md#agent-wait-primitives), `docs/api-reference.md` +**Agent wait primitives**: bounded long-polls: `GET /api/sessions/:id/wait`, `GET .../wait-output` (literal substring, **never** regex) and `wait`/`waitTimeout` on `POST .../input`. Registry `session-wait-registry.ts` (pure), bounds `config/agent-wait.ts`. ⚠️ A timeout is a 200 (`wait.timedOut`). ⚠️ `stop` exists for `claude` and `deepseek` ONLY (rule lives in `hooksAvailableForMode()`), `blocked` also for a CLI declaring `capabilities.workDetect.blockedLine` (codex, read off the screen; `blockedSignalAvailable()`): explicit request elsewhere is a 400. ⚠️ Send-and-wait registers the waiter BEFORE the write; teardown must `notifySignal('exit')` BEFORE `cancelAll()`; hangup abort listens on `reply.raw` (guarded by `writableFinished`), never `req.raw`; liveness comes from `isPaneDead`, never `session.pid`. ⚠️ Signals are edge-triggered with no history: gather fan-outs via send-and-wait or `wait-output` markers. Packaged as the `skills/codeman` skill (`codeman skill install`, plugin marketplace, or injection behind `agentSkillEnabled`, SYNCED, default OFF, into the directory each CLI scans: `capabilities.agentSkillDir`, `.claude/skills` for claude, `.agents/skills` for the others, none for pi): injection is add-only, marker-owned (`applyAgentSkill`), refuses symlinks, and refreshes a marker-owned user-level copy (`refreshUserAgentSkill`). → [architecture-invariants#agent-wait-primitives](docs/architecture-invariants.md#agent-wait-primitives), `docs/api-reference.md` **Agent CLI (`codeman agent …`, `src/cli-agent.ts`)**: the command-line client for the wait primitives and the session verbs, for agents the skill does not reach (pi, shell, no `jq`; `seedAgentSessionPreamble` covers every local session whose CLI takes the skill, `capabilities.agentSkillDir`; every pane still exports `CODEMAN_MUX`/`CODEMAN_SESSION_ID`/`CODEMAN_API_URL`). It is a CLIENT: no new route, no second transport (the plan's "Socket API" non-goal stands), every call carries `X-Codeman-Parent-Session`, only `spawn`'s quick-start carries `X-Codeman-Agent-Origin` (pinned in test/cli-agent.test.ts), auth (`src/codeman-credentials.ts`, shared with `codeman attach` and the TUI) from `CODEMAN_PASSWORD` or the data dir's `.env` (the same reader `codeman attach` uses — `readCodemanEnvFile`). Verbs return exit codes (`0` ok / `1` error / `2` timeout / `3` exited / `4` refused) instead of calling `process.exit`, so `test/cli-agent.test.ts` drives every verb against a recording fake transport plus the real `httpRequest` against a local server. ⚠️ Three guards live in code, not prose, and the tests pin them: refuse without `CODEMAN_MUX=1`+`CODEMAN_API_URL` (never guess a URL); `send` transmits printable text + `\r` only (`inputRefusal`: any byte < 0x20 or DEL refuses BEFORE the transport — opencode's `Ctrl+C` is `app_exit`), ESC exists solely as `interrupt` with no `\r`; `rm` fails closed (`deleteRefusal`: empty id, self shorter than 8, prefix match in EITHER direction, re-checked on the resolved id). ⚠️ The routes accept FULL ids only — an 8-char prefix is a 404 (measured live) — while `ls` prints prefixes, so `resolveSessionId` maps a short id through `GET /api/v1/sessions` and refuses an ambiguous one. It also refuses any id under 8 characters (exit 4, on every verb, before any request), the same floor as the server's `PARENT_SESSION_ID_MIN_PREFIX`, so `rm 9` can never pick an arbitrary session. ⚠️ A 400 for `--until stop` on a hook-less mode is passed through verbatim, never papered over: the marker path is the answer there. `spawn` on a readiness timeout exits 2 and LEAVES the session for inspection (the skill's `spawn_worker` deletes it; the CLI's caller is often a human); its stdout is the id ALONE (prose on stderr) so `SID=$(…)` works. ⚠️ Two server answers that look like success and are not: `delivered:false` without `duplicate` (the bytes went into a dead pane — the field exists so a client says "restart" instead of "wait longer") and `wait.ended:true, signal:null` (the worker died during a `stop`/`idle` wait: the registry satisfies only waiters that listed `exit`, then cancels the rest) — both exit 3, checked BEFORE the happy paths in `waitExitCode`. → README "`codeman agent`", `docs/api-reference.md` @@ -138,17 +138,19 @@ Codeman is a Claude Code session manager with web interface and autonomous Ralph **Idle detection**: Multi-layer (completion message → AI check → output silence → token stability). See `docs/respawn-state-machine.md`. -⚠️ **A `❯` sighting is NOT the end of a turn, and neither is silence.** Claude redraws the composer all through a turn, and its working line (`✻ Actualizing… (13m 23s · …)`) is invisible to `SPINNER_PATTERN`, keyword lists and the raw stream. `_confirmIdle()` (session.ts) requires the pane to go quiet AND the SCREEN (`capturePaneText()` + the working-line pattern) to agree; a sustained run of repaints (`session-activity.ts`) marks a turn as started. ⚠️ The composer glyph and working line are per-CLI registry DATA (`capabilities.workDetect`), never Claude constants; a CLI declaring neither falls back to Claude's pair. ⚠️ `workingLine` is config-supplied and runs on the PTY hot path, so it must compile through `compileVersionRegex()` in BOTH the schema refine and `_workingLinePattern()` (ReDoS guard; null, not throw). → [architecture-invariants#idle-detection-composer-glyph-and-working-line](docs/architecture-invariants.md#idle-detection-composer-glyph-and-working-line) +⚠️ **A `❯` sighting is NOT the end of a turn, and neither is silence.** Claude redraws the composer all through a turn, and its working line (`✻ Actualizing… (13m 23s · …)`) is invisible to `SPINNER_PATTERN`, keyword lists and the raw stream. `_confirmIdle()` (session.ts) requires the pane to go quiet AND the SCREEN (`capturePaneText()` + the working-line pattern) to agree; a sustained run of repaints (`session-activity.ts`) marks a turn as started. ⚠️ The workspace-trust dialog's `❯` (on `No, exit`) arms the check too, so the same capture holds idle off while `isTrustDialogScreen()` matches inside `TRUST_DIALOG_WINDOW_MS`: an agent that waited for idle and prompted the dialog confirmed `No, exit` and killed the pane. ⚠️ The composer glyph and working line are per-CLI registry DATA (`capabilities.workDetect`), never Claude constants; a CLI declaring neither falls back to Claude's pair. ⚠️ `workingLine` is config-supplied and runs on the PTY hot path, so it must compile through `compileVersionRegex()` in BOTH the schema refine and `_workingLinePattern()` (ReDoS guard; null, not throw). → [architecture-invariants#idle-detection-composer-glyph-and-working-line](docs/architecture-invariants.md#idle-detection-composer-glyph-and-working-line) ⚠️ **A turn that ENDED waiting for its own workers is working, not idle.** Claude closes such a turn with `✻ Waiting for 1 dynamic workflow to finish` (background agents / ultracode) and resumes by itself; `capabilities.workDetect.awaitingLine` makes the idle probe count it as work. ⚠️ Claude never redraws that row, so it stays on screen after the workers finish: test it ONLY as the newest column-0 row above the composer (`isAwaitingWorkers()`), never pane-wide and never on the stream. → [architecture-invariants#idle-detection-composer-glyph-and-working-line](docs/architecture-invariants.md#idle-detection-composer-glyph-and-working-line) +⚠️ **A codex dialog is BLOCKED, read off the screen, and only ever an ALERT.** Codex has no hook for its approval, question and trust dialogs, so `capabilities.workDetect.blockedLine` names their chrome and `web/screen-blocked.ts` raises what a `permission_prompt` hook raises, as an `answerInTerminal` item. ⚠️ Never key a keystroke off that match (the agent writes most of the pane), and never hand its item a `capture` (the inbox's sweep is Claude-shaped; the session's 2 s re-read owns the clear). A blocked screen beats the working line. → [architecture-invariants#screen-read-blocked-dialogs-codex](docs/architecture-invariants.md#screen-read-blocked-dialogs-codex) + ⚠️ **A quiet pane is not always a pane that wants you.** A CLI can declare an optional `capabilities.workDetect.watchingLine` (a monitor, background shell or cloud hand-off it is still running); the idle probe reads it into `Session.watching` and `notePrompt()` opens that idle item ALREADY acknowledged, so no surface alerts. Only `idle` is eligible, and the label is pane-derived and prompt-injectable, so a pattern must anchor on chrome only that CLI draws. → [architecture-invariants#the-watching-signal-a-quiet-pane-that-is-not-waiting-for-you](docs/architecture-invariants.md#the-watching-signal-a-quiet-pane-that-is-not-waiting-for-you). Tests: `test/session-watching.test.ts`, `test/watching-no-alert.test.ts`. **An exited agent in a live pane** (`paneExit`, #446): panes use `remain-on-exit on`, so `/exit` leaves a pane, session and pid that look alive; `TmuxManager.startPaneExitWatcher()` publishes `SessionState.paneExit` via `session:updated`. ⚠️ Never set `status: 'error'` or null the `pid` for it; the field is TRI-STATE (absent = UNKNOWN, never alive, scoped by `Session.paneExitApplies`); an absent `#{pane_dead_status}` is not 0; a path that starts a command in a pane must clear the record AND persist. A clean exit is CLOSED via `cleanupSession()` (`pane-exit-sweep.ts`): only an explicit numeric status 0 with no signal, confirmed by 2 reads, with no start/attach in flight (`paneLifecycleInFlight`) and not within 10 s of one (a startup error keeps its row); a crashed agent keeps its row. → [architecture-invariants#an-exited-agent-in-a-live-pane-paneexit](docs/architecture-invariants.md#an-exited-agent-in-a-live-pane-paneexit) **Dead-pane respawn resume pin** (`_buildRespawnPaneOptionsWithResumePin()`, session.ts): recovering a dead pane, like a custom-model `restartCli()`, must pin the conversation or claude refuses the reused `--session-id`. The pin takes the first transcript-backed candidate (chain tail, launch seed, own id), never `_claudeSessionId`, adds nothing when none is backed, and is never applied to remote or docker sessions. → [architecture-invariants#dead-pane-respawn-the-resume-pin](docs/architecture-invariants.md#dead-pane-respawn-the-resume-pin) -**Workspace-trust dialog auto-accept** (`session-trust-dialog.ts`, pure): Claude Code's per-directory trust dialog is always answered yes, or the session is stuck. ⚠️ Match the compacted SCREEN (`compactScreenText()`, all whitespace removed), never the stream (tmux sends words joined by cursor-forwards, not spaces). ⚠️ Never answer with a blind `\r` (newer versions highlight "No, exit" first): `trustDialogNextKey()` returns ONE key per re-read frame (arrow, then Enter only once `❯` is on the trust option), and the LAST marked option wins. ⚠️ All three guards must hold: startup window `TRUST_DIALOG_WINDOW_MS` (90s), two-marker match (`isTrustDialogScreen`), attempt cap `TRUST_DIALOG_MAX_ATTEMPTS` (6). ⚠️ Read `capturePaneText()`; only a direct-PTY session falls back to a SHORT buffer tail. ⚠️ The scan must schedule its own next read (`_trustDialogTimer`, cleared in `_clearAllTimers()`), not rely on PTY output. → [architecture-invariants#workspace-trust-dialog-auto-accept](docs/architecture-invariants.md#workspace-trust-dialog-auto-accept) +**Workspace-trust dialog auto-accept** (`session-trust-dialog.ts`, pure): Claude Code's per-directory trust dialog is always answered yes, or the session is stuck. ⚠️ Match the compacted SCREEN (`compactScreenText()`, all whitespace removed), never the stream (tmux sends words joined by cursor-forwards, not spaces). ⚠️ Never answer with a blind `\r` (newer versions highlight "No, exit" first): `trustDialogNextKey()` returns ONE key per re-read frame (arrow, then Enter only once `❯` is on the trust option), and the LAST marked option wins. ⚠️ All three guards must hold: startup window `TRUST_DIALOG_WINDOW_MS` (90s), two-marker match (`isTrustDialogScreen`), attempt cap `TRUST_DIALOG_MAX_ATTEMPTS` (6). ⚠️ Read `capturePaneText()`; only a direct-PTY session falls back to a SHORT buffer tail. ⚠️ The scan must schedule its own next read (`_trustDialogTimer`, cleared in `_clearAllTimers()`), not rely on PTY output, and a throttled read is DEFERRED onto that timer, never dropped (the dialog's paint is often the pane's last output); a stopped session never scans. → [architecture-invariants#workspace-trust-dialog-auto-accept](docs/architecture-invariants.md#workspace-trust-dialog-auto-accept) **Process-tree walks are bounded** (`proc-tree.ts`, pure): `collectDescendants(pid, byParent)` is the ONE descendant traversal, fed by one cached `ps -eo pid=,ppid=` snapshot (`refreshProcSnapshot()` in tmux-manager.ts: async, in-flight-shared, and ANY error discards the result rather than caching a truncated `ps`). ⚠️ Never walk a process tree with per-node `pgrep` or unbounded recursion (the unbounded version took a machine down): the walk must terminate on cycles, cap depth (`PROC_WALK_MAX_DEPTH`) and node count (`PROC_WALK_MAX_NODES`), and never spawn anything. ⚠️ Keep it in its own module so the test exercises the shipped code, and report truncation through `onTruncated` naming both caps, never silently. → [architecture-invariants#process-tree-walks-are-bounded](docs/architecture-invariants.md#process-tree-walks-are-bounded) @@ -168,7 +170,7 @@ Codeman is a Claude Code session manager with web interface and autonomous Ralph **Docker Compose deployment** (`docker/`): Codeman runs in a container and spawns Docker cases as **SIBLING** containers via the host socket, never nested. `resolveDockerDaemonMountSource()` maps HOME bind sources into the daemon's namespace (`CODEMAN_DOCKER_HOST_HOME`); `CODEMAN_CASES_PATH` makes workspaces resolve to the same absolute path on both sides. ⚠️ `CODEMAN_CASES_PATH` must move every consumer: resolve it only via `config/cases-dir.ts`. ⚠️ `.dockerignore` matches whole paths: keep `**/.env` or `docker/.env` secrets ship in the image. ⚠️ Long-form binds create missing sources ROOT-OWNED: `Start-Codeman.sh` pre-creates them, and `docker/entrypoint.sh` (root, `cap_add: [CHOWN, DAC_OVERRIDE, KILL, SETGID, SETUID]` against `cap_drop: ALL`, `KILL` for tini; pinned by the test) fixes ownership then drops to `PUID:PGID` via `setpriv`, never re-owning foreign dirs. ⚠️ Append `/opt/codeman-cli` and `~/.local/bin` to `PATH`, never prepend. ⚠️ `server.Dockerfile`, the compose file and `.env.example` feed the self-updater's environment gate (`docs/docker-self-update.md`). → [architecture-invariants#docker-compose-deployment](docs/architecture-invariants.md#docker-compose-deployment), `docs/docker-compose.md` -**CLI registry** (`src/config/cli-registry/`): every run mode is a `CliEntry` (discovery, launch argv template, env handling, `capabilities`, and the `overlays` behind remote/docker pane commands). **No code outside `stock.ts` may branch on a CLI id**: use a capability field or a NAMED PROFILE (`profiles.ts`); `test/cli-registry-no-id-branching.test.ts` and `test/frontend-cli-no-id-branching.test.ts` enforce it. ⚠️ Config holds typed argv tokens, never shell text; literals are validated at LOAD time and a bad one rejects the whole entry. ⚠️ Keep `external`, `hooks` and `altScreen` independent; never derive one from another. ⚠️ Config regexes (`discovery.version.regex`, `capabilities.workDetect.workingLine`, `capabilities.workDetect.watchingLine`, `capabilities.workDetect.awaitingLine`, `capabilities.modelDetect.screenLine`) must compile through `compileVersionRegex()`. ⚠️ `privilegedParams[].param` names a LAUNCH PARAM, not the legacy `Config` field (bridged only by `launch.legacyConfigAliases`); a wrong name silently clamps nothing. ⚠️ Resolve the registry AT CALL TIME, never in a module-level const. ⚠️ Remote claude/omp arms of `buildRemoteLaunchCommand` are not covered by the pane-command golden. `~/.codeman/clis.json` overrides entries. It is WRITTEN only by the opt-in CLI management routes (`cliManagementEnabled`, default OFF; `/api/clis`, `cli-registry-routes.ts`), and only through `mutateRegistryFile()` in `registry-writer.ts`, which serializes mutations and refuses (409) a file that does not parse or has group/world permission bits rather than overwriting it. Importing the registry still writes nothing. → [architecture-invariants#cli-registry](docs/architecture-invariants.md#cli-registry), `docs/cli-registry.md` +**CLI registry** (`src/config/cli-registry/`): every run mode is a `CliEntry` (discovery, launch argv template, env handling, `capabilities`, and the `overlays` behind remote/docker pane commands). **No code outside `stock.ts` may branch on a CLI id**: use a capability field or a NAMED PROFILE (`profiles.ts`); `test/cli-registry-no-id-branching.test.ts` and `test/frontend-cli-no-id-branching.test.ts` enforce it. ⚠️ Config holds typed argv tokens, never shell text; literals are validated at LOAD time and a bad one rejects the whole entry. ⚠️ Keep `external`, `hooks` and `altScreen` independent; never derive one from another. ⚠️ Config regexes (`discovery.version.regex`, `capabilities.workDetect.workingLine`, `capabilities.workDetect.watchingLine`, `capabilities.workDetect.awaitingLine`, `capabilities.workDetect.blockedLine`, `capabilities.modelDetect.screenLine`) must compile through `compileVersionRegex()`. ⚠️ `privilegedParams[].param` names a LAUNCH PARAM, not the legacy `Config` field (bridged only by `launch.legacyConfigAliases`); a wrong name silently clamps nothing. ⚠️ Resolve the registry AT CALL TIME, never in a module-level const. ⚠️ Remote claude/omp arms of `buildRemoteLaunchCommand` are not covered by the pane-command golden. `~/.codeman/clis.json` overrides entries. It is WRITTEN only by the opt-in CLI management routes (`cliManagementEnabled`, default OFF; `/api/clis`, `cli-registry-routes.ts`), and only through `mutateRegistryFile()` in `registry-writer.ts`, which serializes mutations and refuses (409) a file that does not parse or has group/world permission bits rather than overwriting it. Importing the registry still writes nothing. → [architecture-invariants#cli-registry](docs/architecture-invariants.md#cli-registry), `docs/cli-registry.md` **External CLI modes (OpenCode, Codex, Gemini, Antigravity, Pi, Grok, DeepSeek, OMP)**: `isExternalCliMode()` in `session.ts` gates Claude-specific behavior off (Ralph tracker, BashToolParser, token parsing, ❯ readiness; readiness is output stabilization); work detection is per-CLI `capabilities.workDetect` data, not this gate. All eight **require tmux, no direct PTY fallback** (secrets go via socket-scoped `tmux setenv`, never the command line). ⚠️ `run*()` in `session-ui.js` MUST unwrap the `{success,data}` envelope. ⚠️ **Codex uses predictive write-through echo, never the buffer overlay**: `_predictHookOnData` must never `return` (wire path stays byte-identical), and flushed text and a bracketed paste must go out as separate delayed writes. ⚠️ **Pi**: no bypass flag, never invent one; `approveProjectTrust` executes repo code, so it is in the clamp's **materialize** branch; never wire `--api-key`. ⚠️ **Grok**: `alwaysApprove` is stripped for non-granted owners (only-if-sent). ⚠️ **DeepSeek**: the agent is a PROFILE (Run gates on `isDeepSeekRunnable()`); the permission switch is the `DSH_PERMISSION_MODE` env var, so `clampEnvOverridesForOwner()` must DROP `DSH_PERMISSION_MODE`, `DSH_HOME` and `DEEPSEEK_BASE_URL` for non-granted owners; `hooksAvailableForMode()` is per-SESSION for it (pass `sessionHookOptions(session)`) and is never a stand-in for `mode === 'claude'`; answers come from `deepseek-transcript.ts`, paired by header `cwd` + boot window, never newest-mtime. ⚠️ **OMP**: `OMP_AUTH_BROKER_URL`/`_TOKEN` are clamped the same way. → [architecture-invariants#external-cli-modes-opencode-codex-gemini-antigravity-pi-grok-deepseek-omp](docs/architecture-invariants.md#external-cli-modes-opencode-codex-gemini-antigravity-pi-grok-deepseek-omp) @@ -192,7 +194,7 @@ Codeman is a Claude Code session manager with web interface and autonomous Ralph **Reboot restore** (`src/reboot-restore.ts` pure + `web/reboot-restore-registry.ts` + `routes/reboot-restore-routes.ts` + `reboot-restore-ui.js`): after a host reboot kills every pane, Codeman holds an IN-MEMORY plan of the destroyed sessions and a banner offers to rebuild them. ⚠️ The heuristic only decides whether to ASK. ⚠️ Rebuild is TAKE-then-build (entries leave the plan before the first `await`, single-flighted per owner). ⚠️ Re-check grant, workspace and already-live at click time, reading already-live FRESH per entry; key confinement on the entry's OWNER, never the caller. ⚠️ Rebuilt sessions come back disarmed: no respawn/Ralph, `rearmAutoResumeSchedule: false`, and pass `nameSource` through. ⚠️ Undo a failed rebuild with `discardPartiallyBuiltSession()`, NEVER `cleanupSession()`. Claude-mode only, never remote/docker. Tests: `test/reboot-restore.test.ts`. → [architecture-invariants#reboot-restore](docs/architecture-invariants.md#reboot-restore) -**Approvals Inbox** (`approvalsInboxEnabled`, SYNCED, default OFF; the store and answer endpoints run regardless): `web/approval-inbox.ts` is an in-memory, claude-only queue fed by `/api/hook-event`, at most ONE item per session, answered via `POST /api/approvals/:id/answer` through `writeViaMux` (menu answers never carry `\r`). ⚠️ Accept `option` digits ONLY if they match options parsed from a fresh RE-CAPTURE of the pane; a dialog no longer on screen is a 409. ⚠️ Resolve permission/question items only via the pane-verified `verifyStillAnswerable()`; the heuristic `working` signal alone may resolve `idle` items only. ⚠️ `applyCapture()` is ADD-ONLY for `options`. ⚠️ Viewing ACKNOWLEDGES an idle item (never resolves it) and only a human selection does: app-made selections pass `selectSession(id, { auto: true })`; `_ackDelivery` spends the IDLE alert only. ⚠️ `handleInit` seeds tab alerts from `GET /api/approvals` REGARDLESS of the setting. → [architecture-invariants#approvals-inbox](docs/architecture-invariants.md#approvals-inbox) +**Approvals Inbox** (`approvalsInboxEnabled`, SYNCED, default OFF; the store and answer endpoints run regardless): `web/approval-inbox.ts` is an in-memory queue fed by `/api/hook-event` (answerable items claude-only; DeepSeek's and codex's screen-read ones are alert-only `answerInTerminal`), at most ONE item per session, answered via `POST /api/approvals/:id/answer` through `writeViaMux` (menu answers never carry `\r`). ⚠️ Accept `option` digits ONLY if they match options parsed from a fresh RE-CAPTURE of the pane; a dialog no longer on screen is a 409. ⚠️ Resolve permission/question items only via the pane-verified `verifyStillAnswerable()`; the heuristic `working` signal alone may resolve `idle` items only. ⚠️ `applyCapture()` is ADD-ONLY for `options`. ⚠️ Viewing ACKNOWLEDGES an idle item (never resolves it) and only a human selection does: app-made selections pass `selectSession(id, { auto: true })`; `_ackDelivery` spends the IDLE alert only. ⚠️ `handleInit` seeds tab alerts from `GET /api/approvals` REGARDLESS of the setting. → [architecture-invariants#approvals-inbox](docs/architecture-invariants.md#approvals-inbox) **Read My Mind intent profiles** (`readMyMindEnabled`, SYNCED, default OFF; `docs/readmymind-plan.md`): per-CASE profiles (goals + recent prompts) keyed by owner + realpath(workingDir), captured from the transcript (`transcript:user_prompt`), never the input paths; the listener must stay inside `startTranscriptWatcher()`'s `if (!watcher)` block. Store `src/intent-store.ts` → `intents.json`, ⚠️ written 0600 tmp+rename and never fed to `/api/search` (prompts carry secrets). Routes in `readmymind-routes.ts` (ownership via `findSessionOrFail` WITH `req`); predictor = pure `readmymind-context.ts` + IO in `readmymind-collectors.ts` + `readmymind-predictor.ts`, claude-only, one in flight per session (409). ⚠️ Suggestions render via value/`textContent` ONLY and nothing auto-sends, ever. Frontend `readmymind-ui.js`. → [architecture-invariants#read-my-mind-intent-profiles](docs/architecture-invariants.md#read-my-mind-intent-profiles) @@ -200,7 +202,7 @@ Codeman is a Claude Code session manager with web interface and autonomous Ralph **Agent Teams**: `TeamWatcher` polls `~/.claude/teams/`, matches to sessions via `leadSessionId`. Teammates are in-process threads appearing as subagents. Enable: `CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS=1`. See `docs/agent-teams/`. -**Circuit breakers**: the Ralph breaker prevents respawn thrashing (`CLOSED` → `HALF_OPEN` → `OPEN`; reset via `/api/sessions/:id/ralph-circuit-breaker/reset`). **Distinct: the PTY-exit breaker** (`session-pty-exit-breaker.ts`) trips after repeated rapid PTY exits and blocks auto-restarts. ⚠️ It resets ONLY via an explicit `{clearBreaker:true}` body on `POST /api/sessions/:id/interactive`; the frontend's auto-reattach in `selectSession()` sends no body and must never clear it. → [architecture-invariants#circuit-breakers-ralph--pty-exit](docs/architecture-invariants.md#circuit-breakers-ralph-and-pty-exit) +**Circuit breakers**: the Ralph breaker prevents respawn thrashing (`CLOSED` → `HALF_OPEN` → `OPEN`; reset via `/api/sessions/:id/ralph-circuit-breaker/reset`). **Distinct: the PTY-exit breaker** (`session-pty-exit-breaker.ts`) trips after repeated rapid PTY exits and blocks auto-restarts. ⚠️ It resets ONLY via an explicit `{clearBreaker:true}` body on `POST /api/sessions/:id/interactive`; the frontend's auto-reattach in `selectSession()` sends no body and must never clear it. → [architecture-invariants#circuit-breakers-ralph-and-pty-exit](docs/architecture-invariants.md#circuit-breakers-ralph-and-pty-exit) **Full-scrollback replay**: `GET /api/sessions/:id/terminal?full=1` returns the whole tmux scrollback ALONE (`source='mux-full-history'`), superseding the byte buffer. First load of each non-shell TUI session requests it (`_fullHistoryLoaded`); Shell selection, drop recovery, clear and a tile's load use `SHELL_LOAD_QUERY` (constants.js), a bounded window of tmux's RENDERED history (`?full=1&tail=1MiB&alt=recording&lines=10000`), never the raw byte recording, whose full-screen repaints replayed at another pane height push copies of their top row into scrollback; the route reports a client `lines=` bound below the history ceiling that left lines in tmux as `truncationReason: 'tail'`, and `alt=recording` falls back to the visible frame over the tailed byte recording when the pane is in the alternate screen (a nested tmux in a remote or Docker case keeps no tmux history; vim/less take it too while open). A Shell scroll-to-top pulls a bounded `?full=1&tail=` window (a window no longer than the browser's buffer is skipped before the downgrade guard, so it never marks the session exhausted); the unbounded pull stays behind **Load full history**. A Shell split-pane Pane B has its own copy of the bounded pull against its own xterm (`TerminalTile._pullHistory`, terminal-tile.js); keep the two in step. → [architecture-invariants#split-pane-sessions](docs/architecture-invariants.md#split-pane-sessions) ⚠️ The capture ends with a RELATIVE cursor move back to the pane's caret (never `CUP`), so no line-deleting transform may run over it; those skips key on `isFullCapture`, never on `?full=1` alone. ⚠️ A re-pull must never shrink the buffer (`_replayWouldShrinkBuffer()`). ⚠️ `captureCols`/`captureRows` are absent when no frame was positioned: test `Number.isFinite`, never truthiness. ⚠️ A frame dropped at the 128 KiB render cap MUST be recovered, and the recovery verifies itself: `_scheduleDroppedOutputRecovery` re-arms (bounded by `DROP_RECOVERY_MAX_ATTEMPTS`) while `_onSessionNeedsRefresh` reports no repaint, but never after a capture-fetch `'deadline'`. → [architecture-invariants#full-scrollback-replay](docs/architecture-invariants.md#full-scrollback-replay) @@ -213,7 +215,7 @@ Codeman is a Claude Code session manager with web interface and autonomous Ralph **Attachments** (live external document references; all wiring in `file-routes.ts`): a **registry** maps a stable `attachmentId` to a realpath-resolved, extension-allowlisted absolute path, so browser requests never carry arbitrary absolute paths. ⚠️ The **magic-link scanner** (`codeman://attach?...` in terminal output) is **prompt-injectable**, so its scan path is force-confined to the session workspace; a hostile prompt could otherwise exfiltrate arbitrary host files over SSE. The security gate is an extension **allowlist**, not a blocklist. `document-conversion-limiter.ts` caps converter spawns globally: without it, N large docs detected at once fork N multi-minute processes, which is a resource-exhaustion vector. → [architecture-invariants#attachments](docs/architecture-invariants.md#attachments) -**Prompt uploads** (`POST /api/sessions/:id/paste-image`: clipboard paste, drop, the Compose Attach key and the phone toolbar's Attach button; client wiring in `image-input.js` and `keyboard-accessory.js`): a pick is written to `/.codeman-uploads/` and its path lands on the prompt as unsent text. The folder is IN the workspace because that is the only path identical for a local and a container agent, FLAT because `/.codeman/` would BE the data dir when the workspace is the home directory, and self-ignoring through a `.gitignore` of `*` written ONCE with `wx` (a file already there is the user's and is never overwritten; the user's own ignore file is never touched). ⚠️ The directory names live ONLY in `paste-image-gc.ts` (`UPLOAD_DIR_NAMES`): the pre-move `.claude-images/` receives nothing but stays readable for one release, so the GC sweep and the delete cleanup (through `uploadDirs()`) and the image watcher's ignore filter (reading the names) cover BOTH; retire the legacy entry there, never by hand elsewhere. ⚠️ `uploadDirs()` is async and probes the workspace BOUNDED first (`probePathKind()`, the #516 rule: an `unknown` path is skipped, never touched; the sweep keeps the stall cap and the delete passes `pastCap`), then returns only REAL directories (lstat, so a planted symlink is never one), none that is or contains `getDataDir()` (one strictly inside it only holds uploads and is listed), and none for a remote session, since both consumers delete; the check is made at list time, and the same-user race after it is accepted. Images are buffered in memory under `MAX_PASTE_IMAGE_BYTES` (50MB) after a client-side canvas re-encode. A VIDEO is never buffered: `?kind=video` streams it to disk under `MAX_PASTE_VIDEO_BYTES` (1GB, env `CODEMAN_MAX_PASTE_VIDEO_BYTES`), judges the container on the first 12 bytes as they arrive (ISO BMFF / QuickTime atom, EBML for webm, Ogg for ogv; a mislabeled body is drained unwritten from there, never parked on disk first) and unlinks on any failure, a dead transfer included. ⚠️ The flag is the ONLY way onto that path and admits video types alone (the registry's `VIDEO_ATTACHMENT_EXTENSIONS`, single-sourced: mp4/webm/mov/m4v/ogv, so an uploaded video is one the file viewer can also play; 3gp/mkv are out, since a phone's camera roll produces neither and neither previews), so an image can never ride the larger cap through memory; without it the route is byte-identical to the image-only version. Busboy takes its size limit before the part is seen, which is why the choice rides the URL and not the file. ⚠️ A video draws on its OWN per-(IP, session) rate bucket (`consumeVideoToken`, 3/min) beside the image bucket (`consumePasteToken`, 30/min): at 1GB each, 30/min would be 30GB of disk a minute, so the lower rate bounds it to 3GB; the image path keeps the 30/min bucket and is unchanged without the flag. A remote (SSH) session is refused (400) before any disk touch: its `workingDir` is the remote path, so the file would land on THIS host where the agent cannot read it (Docker is fine, the workspace is bind-mounted at the same absolute path). ⚠️ A live session's workspace can still sit on a network mount that stopped answering, so the route probes it BOUNDED (`probePathKind(session.workingDir, { pastCap: true })`, the #516 rule) before the first disk touch and refuses an `unknown` mount through `describeUnknownPath()` (OPERATION_FAILED), the way session create does, so a mount already unreachable cannot freeze a libuv worker on every upload (a mount that dies after the probe is the same residual race create accepts). ⚠️ The client classifies a pick through ONE helper, `_promptAttachKind()` (MIME type first, then the name's extension, because some Android file managers hand over a File with none); every pick and paste filter (Attach, drop, the tile grid's drop in `tile-grid.js`, the Compose and paste-dialog pickers, the clipboard handlers), the flag and the re-encode gate read it, never `file.type` directly. ⚠️ A pick that lands while the tile grid owns the terminal goes to the PTY, never the main terminal's overlay: that terminal is parked and hidden then, and a tile's Enter cannot flush it (`_tilesOwnTerminal()` in the `_attachFromToolbar` guard). Tests: `test/toolbar-attach.test.ts`, `test/mobile-prompt-composer.test.ts`, `test/paste-image-gc.test.ts`, `test/paste-image-dir-shared.test.ts`, the paste-image block of `test/routes/session-routes.test.ts`. → [architecture-invariants#buffers-uploads-and-terminal-history](docs/architecture-invariants.md#buffers-uploads-and-terminal-history) +**Prompt uploads** (`POST /api/sessions/:id/paste-image`: clipboard paste, drop, the Compose Attach key and the phone toolbar's Attach button; client wiring in `image-input.js` and `keyboard-accessory.js`): a pick is written to `/.codeman-uploads/` and its path lands on the prompt as unsent text. The folder is IN the workspace because that is the only path identical for a local and a container agent, FLAT because `/.codeman/` would BE the data dir when the workspace is the home directory, and self-ignoring through a `.gitignore` of `*` written ONCE with `wx` (a file already there is the user's and is never overwritten; the user's own ignore file is never touched). ⚠️ The directory names live ONLY in `paste-image-gc.ts` (`UPLOAD_DIR_NAMES`): the pre-move `.claude-images/` receives nothing but stays readable for one release, so the GC sweep and the delete cleanup (through `uploadDirs()`) and the image watcher's ignore filter (reading the names) cover BOTH; retire the legacy entry there, never by hand elsewhere. ⚠️ `uploadDirs()` is async and probes the workspace BOUNDED first (`probePathKind()`, the #516 rule: an `unknown` path is skipped, never touched; the sweep keeps the stall cap and the delete passes `pastCap`), then returns only REAL directories (lstat, so a planted symlink is never one), none that is or contains `getDataDir()` (one strictly inside it only holds uploads and is listed), and none for a remote session, since both consumers delete; the check is made at list time, and the same-user race after it is accepted. Images are buffered in memory under `MAX_PASTE_IMAGE_BYTES` (50MB) after a client-side canvas re-encode; a DOCUMENT (pdf, docx, pptx, xlsx, zip and the text family txt/md/csv/tsv/json/log/yaml/yml/xml; the curated `ALLOWED_DOCUMENT_EXTS`, never `SUPPORTED_ATTACHMENT_EXTENSIONS` or `EDITABLE_EXTENSIONS`, which carry sh/py/js/html) is admitted by its name's extension alone, buffered like an image, judged on its bytes by the same fail-closed `imageMagicMatchesExt` (`%PDF-`, `PK\x03\x04` for the OOXML trio and zip, UTF-8 without a NUL byte for text: a SIGNATURE or ENCODING check, never a structure or content check, so generic zip bytes pass as `.docx` and a script renamed `.txt` is text; the sh/py/js/html exclusion is a SCOPE choice by extension, keeping the server from storing what it would serve or run, not a content filter: the agent can already write any of those) and saved as `paste---` with a sanitized stem (`[A-Za-z0-9._-]`, 40 chars, a wholly non-ASCII name leaves no stem; the `paste-` prefix is what the GC matches). A VIDEO is never buffered: `?kind=video` streams it to disk under `MAX_PASTE_VIDEO_BYTES` (1GB, env `CODEMAN_MAX_PASTE_VIDEO_BYTES`), judges the container on the first 12 bytes as they arrive (ISO BMFF / QuickTime atom, EBML for webm, Ogg for ogv; a mislabeled body is drained unwritten from there, never parked on disk first) and unlinks on any failure, a dead transfer included. ⚠️ The flag is the ONLY way onto that path and admits video types alone (the registry's `VIDEO_ATTACHMENT_EXTENSIONS`, single-sourced: mp4/webm/mov/m4v/ogv, so an uploaded video is one the file viewer can also play; 3gp/mkv are out, since a phone's camera roll produces neither and neither previews), so an image can never ride the larger cap through memory; without it the route is byte-identical to the image-only version. Busboy takes its size limit before the part is seen, which is why the choice rides the URL and not the file. ⚠️ A video draws on its OWN per-(IP, session) rate bucket (`consumeVideoToken`, 3/min) beside the image bucket (`consumePasteToken`, 30/min): at 1GB each, 30/min would be 30GB of disk a minute, so the lower rate bounds it to 3GB; the image path keeps the 30/min bucket and is unchanged without the flag. A remote (SSH) session is refused (400) before any disk touch: its `workingDir` is the remote path, so the file would land on THIS host where the agent cannot read it (Docker is fine, the workspace is bind-mounted at the same absolute path). ⚠️ A live session's workspace can still sit on a network mount that stopped answering, so the route probes it BOUNDED (`probePathKind(session.workingDir, { pastCap: true })`, the #516 rule) before the first disk touch and refuses an `unknown` mount through `describeUnknownPath()` (OPERATION_FAILED), the way session create does, so a mount already unreachable cannot freeze a libuv worker on every upload (a mount that dies after the probe is the same residual race create accepts). ⚠️ Dispatch mirrors the client: an `image/*` MIME takes the IMAGE path whatever the name says (a GIF named `animation.txt` stays a GIF), a document extension takes the document branch, and anything else takes the image path exactly as before, where the HEIC sniff still recovers a HEIC under a generic name; a foreign extension with no image MIME gets its `Unsupported file type` 400 only AFTER that sniff fails, never before, so nothing the image path ever accepted by its bytes is refused. The text-mismatch log line names the failure (`nul-byte`/`not-utf8`) and never prints the bytes, since the head of a text file is user content. ⚠️ The client classifies a pick through ONE helper, `_promptAttachKind()` (MIME type first, then the name's extension, because some Android file managers hand over a File with none; returns `image`, `video` or `document`); every pick and paste filter (Attach, drop, the tile grid's drop in `tile-grid.js`, the Compose and paste-dialog pickers, the clipboard handlers), the flag and the re-encode gate read it, never `file.type` directly. ⚠️ A pick that lands while the tile grid owns the terminal goes to the PTY, never the main terminal's overlay: that terminal is parked and hidden then, and a tile's Enter cannot flush it (`_tilesOwnTerminal()` in the `_attachFromToolbar` guard). Tests: `test/toolbar-attach.test.ts`, `test/mobile-prompt-composer.test.ts`, `test/paste-image-gc.test.ts`, `test/paste-image-dir-shared.test.ts`, the paste-image block of `test/routes/session-routes.test.ts`. → [architecture-invariants#buffers-uploads-and-terminal-history](docs/architecture-invariants.md#buffers-uploads-and-terminal-history) **File-path links (terminal + chat)**: a path an agent prints is clickable on BOTH surfaces and opens the file-preview overlay. ⚠️ ONE pattern (`FILE_PATH_LINK_PATTERN` / `absoluteFilePathPattern()` in constants.js) feeds the xterm link provider AND `_linkifyFilePaths()`, a fresh instance per call (`lastIndex`). Both call `findFilePathLinks()`, which adds `~/`, relative and folder paths without overlapping a rooted match or a URL; a relative path resolves against `workingDir` (`resolveLinkedFilePath`), `~/` only server-side on the session's host (attachment route), and `terminalPathLine()` joins a path a program hard-wrapped short of the edge. ⚠️ A folder link opens the **folder grid**: `POST /api/sessions/:id/folders` guards + GRANTS the folder (`folder-listing.ts`, own registry, never the 200-capped attachment registry), files come by bare name via `…/folders/:folderId/files/:name/*` through `resolveServableAttachmentPath` plus the same extension/regular-file gate on the symlink's resolved target, so no browser request carries a path; `~/` is refused in a Docker case (the container's home is not this host's). The chat linkifier walks TEXT NODES with DOM APIs, never rebuilds sanitized markup as a string. ⚠️ An out-of-workspace path goes through the ATTACHMENT routes (`POST /api/sessions/:id/attachments` with `notify: false`), never by widening `file-content`/`file-raw` or `file-stream-manager`'s `tail -f` allowlist. ⚠️ `TEXT_ATTACHMENT_EXTENSIONS` IS `EDITABLE_EXTENSIONS` (never a second list), and widening READ must never widen RUN: `html`/`htm`/`svg` stay download-only, other text is inert `text/plain`+`nosniff`. ⚠️ The ONE place HTML renders is `/html-view//...` (`html-view-routes.ts`, `html-view-capabilities.ts`): `POST /api/sessions/:id/html-view` mints a capability for the file's own directory, every response carries `Content-Security-Policy: sandbox` WITHOUT `allow-same-origin` (opaque origin even as a top-level tab, so the page can never read Codeman or drive its API) and with NO fetch directive (open network, owner decision 2026-10-13: never restrict it or add `allow-same-origin` without the owner), and only non-dot, asset-allowlisted files under that directory are served (GET/HEAD only; capabilities revoked with the web-tab ones on logout). That tree is served recursively, so minting is refused for a hidden directory or a broad root (`isBroadHtmlViewRoot`); the preview renders by default and the **Page** pill (or a refused mint) falls through to the source view and its Edit button. Never serve HTML same-origin anywhere else. Tests: `test/routes/html-view-routes.test.ts`. Media extensions are single-sourced in `attachment-registry.ts`. ⚠️ **XLSX previews parse in the BROWSER**, never on the server; the admission limits that keep a hostile workbook from freezing the worker live in `src/web/CLAUDE.md` (Spreadsheet preview). → [architecture-invariants#file-path-links-terminal--response-viewer](docs/architecture-invariants.md#file-path-links-terminal--response-viewer) @@ -227,15 +229,17 @@ Codeman is a Claude Code session manager with web interface and autonomous Ralph **Raw file bodies are streamed and range-aware**: `file-raw`, the attachments `/raw` route, `GET /api/download` and the rendered-HTML route `GET /html-view//...` share `sendFileBody()`, advertise `Accept-Ranges: bytes` and answer `Range` with `206` + `Content-Range` (single-range, parser in `src/web/http-range.ts`); without it `